Christie Projector Mirage M Series User Manual
Have a look at the manual Christie Projector Mirage M Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 476 Christie manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Appendix C: DMX / ArtNet Mirage M Series User ManualC-3020-100575-02 Rev. 1 (11-2010) Mirage M Series Setup Personality Channel Group Name DescriptionDefault Value Notes 1 Safety Slider Lock0-171 Locked 172-255 Unlocked255No Channel changes will be applied when this control is locked. Channel changes made while the slider is locked will be applied once the slider becomes unlocked. 2VideoFade to/from Black0-85 Black screen (Picture mute ON) 172-255 Live Video (Picture mute OFF)255If you wish to manually control the fade to black time, the brightness channel can be used to achieve the same effect. 3 Lens Shutter0-85 Shutter Closed (Black Screen) 172-255 Shutter Open (Live Video)255 4 LensLens shift enable0-85 Lens shift disable 172-255 Lens shift enable255 Locks all lens motors. 5 Lens Zoom (Coarse) 0 to 255 Scaled as % of total control range, which is 0 to 2100125 Locked by channel “Lens shift enable”. 6 Lens Zoom (Fine)0 7 Lens Zoom (Coarse) 0 to 255 Scaled as % of total control range, which is 0 to 2100128 Locked by channel “Lens shift enable”. 8 Lens Zoom (Fine)0 9 LensLens Horizontal position (Coarse) 0 to 255 Scaled as % of total control range, which is 0 to 4096128 Locked by channel “Lens shift enable” 10 LensLens Horizontal position (Fine)0 11 LensLens Vertical position (Coarse) 0 to 255 Scaled as % of total control range, which is 0 to 4096128 Locked by channel “Lens shift enable” 12 LensLens Vertical position (Fine)0 13 Input ChannelProjector Channel Selection 0 to 9 Projector Channel 1 10 to 19 Projector Channel 2 20 to 29 Projector Channel 3 .... 180 to 189 Projector Channel 19 190 to 199 Projector Channel 20255
C-4Mirage M Series User Manual020-100575-02 Rev. 1 (11-2010) Appendix C: DMX / ArtNet Channel Group Name DescriptionDefault Value Notes 14 Input InputInput Selection 0 to 9 Slot 1, Input 1 10 to 19 Slot 1, Input 2 .... 50 to 59 Slot 1, Input 6 60 to 69 Slot 2, Input 1 .... 110 to 119 Slot 2, Input 6 120 to 129 Slot 3, Input 1 .... 170 to 179 Slot 3, Input 6 180 to 189 Slot 4, Input 1 .... 230 to 239 Slot 4, Input 6255 Will not change input on default 15 Image Image Freeze0-85 Unfreeze image 172-255 Freeze Image0 16Lamps/ PowerPower0-85 Power Off (Switch lamps off, cool lamps down and go to Standby mode) 172-255 Power On (Switch lamps on, warm up mode)128A 5 second timer will be used before executing a power state change. If the slider moves out of the On/Off range within the 5 seconds, the timer will be can- celled. Will not change power stat on default. 17 Image Size 0 to 255 Scaled as % of total control range, which is 200 to 400067 18 Image Vertical Stretch0 to 255 Scaled as % of total control range, which is 200 to 300091 19Setup FunctionsProjector Orientation0-49 Front Projection 50-99 Rear Projection 100-149 Front Projection Inverted 150-199 Rear Projection Inverted255Will not change projector orien- tation on default. 20Setup FunctionsOn Screen Display0-85 OSD Off 172-255 OSD On128 Will not change OSD on default. 21Setup FunctionsLens Calibrate172-255 Run calibration 0Locked by channel “Lens shift enable”. 22Setup FunctionsLamp PowerScaled as % of total control range. Examples are given for 350W and 200W lamps: 0 0% 300 Watt / 150 Watt .... 127 50% 335 Watt / 175 Watt .... 255 100% 370 Watt / 200 Watt255Depends on what lamps are used, power rating may be dif- ferent scale. 23Setup FunctionsLamp Mode0-85 Auto Select Single lamp 172-255 Dual Lamp Mode128Will not change lamp mode on default.
Appendix C: DMX / ArtNet Mirage M Series User ManualC-5020-100575-02 Rev. 1 (11-2010) Channel Group Name DescriptionDefault Value Notes 24Setup FunctionsTest Pattern0-19 Off 20-39 Grid 40-59 Grey Scale 16 60-79 White 80-99 Flat Grey 100-119 Black 120-139 Checker 140-159 13 Point 160-179 Color Bars 180-199 Aspect Ratio 200-219 Edge Blend 220-239 Boresight0 25 Colormetry Brightness0 to 255 Scaled as % of total control range, which is 0 to 100128 26 Colormetry Contrast0 to 255 Scaled as % of total control range, which is 0 to 100128 27 Colormetry Gamma0 to 255 Scaled as % of total control range, which is -100 to 100128 28 Colormetry Color Space0-49 RGB 50-99 YCbCr SDTV (ITU-R BT.601) 100-149 YCbCr HDTV (ITU-R BT.709)0 29 Colormetry Output Color0-19 Max Drivers 20-39 Color Temperatur (endables 31) 40-59 SD Video 60-79 HD Video 80-99 User setting 1 100-119 User setting 2 120-139 User setting 3 140-159 User setting 40 30 ColormetryColor Purity Filter0-85 Off 172-255 On This is the global control, not the chan- nel control.0 31 ColormetryInterpolated Color (Temperature)*0 to 255 Scaled as % of total control range, which is 3200 to 9300128*Output Color control must be set to “Color Temperatur” in DMX channel 29 32Advanced ImageBlend enable0-19 Blend disable 20-39 Standard Blend enable 40-59 User Blend 1 enable 60-79 User Blend 2 enable .... 220-239 user Blend 10 enable0The list of blends depends on the blends having been saved on the projector by the user. 33Advanced ImageWarp/keystone enable0-19 Warp/keystone disable 20-39 2D Keystone enable 40-59 Warp 1 enable .... 220-239 Warb 10 enable0The list of warps depends on the warps having been saved on the projector by the user.
C-6Mirage M Series User Manual020-100575-02 Rev. 1 (11-2010) Appendix C: DMX / ArtNet Channel Group Name DescriptionDefault Value Notes 34 Real Time EventsRTE 10-85 Cancel current running RTE 172-255 Triggers RTE 1128 35Real Time EventsRTE 20-85 Cancel current running RTE 172-255 Triggers RTE 2128 36 Real Time EventsRTE 30-85 Cancel current running RTE 172-255 Triggers RTE 3128 37 ReservedReserved for future expansion No reset 38 ReservedReserved for future expansion No reset Mirage M Series Show Personality Channel Group Name DescriptionDefault Value Notes 1 SafetySlider Lock0-171 Locked 172-255 Unlocked255No channel changes will be applied when this control is locked. Channel changes made while the slider is locked will be applied once the slider becomes unlocked. 2 VideoFade to/from Black0-85 Black screen (Picture mute ON) 172-255 Live video (Picture mute OFF)255If you wish to manually control the fade to black time, the brightness channel can be used to achieve the same effect. 3 LensShutter0-85 Shutter Closed (Black Screen) 172-255 Shutter Open (Live Video)255 4 LensLens shift enable0-85 Lens shift disable 172-255 Lens shift enable255 Lock all lens motors. 5 LensZoom (Coarse) 0 to 255 Scaled as % of total control range, which is 0 to 2100128 Locked by channel “Lens shift enable”. 6 LensZoom (Fine) 0 7 LensFocus (Coarse) 0 to 255 Scaled as % of total control range, which is 0 to 2100128 Locked by channel “lens shift enable”. 8 LensFocus (Fine) 0 9 LensLens Horizontal position (Coarse) 0 to 255 Scaled as % of total control range, which is 0 to 4096128 Locked by channel “lens shift enable”. 10 LensLens Horizontal position (Fine)0 11 LensLens Vertical position (Coarse) 0 to 255 Scaled as % of total control range, which is 0 to 4096Locked by channel “lens shift enable”. 12 LensLens Vertical position (Fine)
Appendix C: DMX / ArtNet Mirage M Series User ManualC-7020-100575-02 Rev. 1 (11-2010) Channel Group Name DescriptionDefault Value Notes 13 InputChannelProjector Channel Selection 0 to 9 Projector Channel 1 10 to 19 Projector Channel 2 20 to 29 Projector Channel 3 .... 180 to 189 Projector Channel 19 190 to 199 Projector Channel 20255 14 InputInputInput Selection 0 to 9 Slot 1, Input 1 10 to 19 Slot 1, Input 2 .... 50 to 59 Slot 1, Input 6 60 to 69 Slot 2, Input 1 .... 110 to 119 Slot 2, Input 6 120 to 129 Slot 3, Input 1 .... 170 to 179 Slot 3, Input 6 180 to 189 Slot 4, Input 1 .... 230 to 239 Slot 4, Input 6255Will not change input on default. 15 ImageImage Freeze0-85 Unfreeze image 172-255 Freeze image0 16Lamps/ PowerPower0-85 Power Off (Switch lamps off, cool lamps down and go to Standby mode) 172-255 Power On (Switch lamps on, warm up mode)128A 5 second timer will be used before executing a power state change. If the slider moves out of the On/Off range within the 5 seconds, the timer will be can- celled. Will not change power state on default. 17 ReservedReserved for future expansion No Reset 18 ReservedReserved for future expansion No Reset Mirage M Series ZAP Personality Channel Group Name DescriptionDefault Value Notes 1 VideoFade to/from Black0-85 Black screen (Picture mute ON) 172-255 Live video (Picture mute OFF) 0 Shutter Closed 1-255 Shutter Open255If a value of 0 is set, the shutter will be closed. Any non-zero values will open the shutter. If you wish to manually control the fade to black time, the bright- ness channel can be used to achieve the same effect. 2 LensShutter0-85 Shutter Closed (Black Screen) 172-255 Shutter Open (Live Video)255
C-8Mirage M Series User Manual020-100575-02 Rev. 1 (11-2010) Appendix C: DMX / ArtNet Channel Group Name DescriptionDefault Value Notes 3 LensLens shift enable0-85 Lens shift disable 172-255 Lens shift enable255 Locks all lens motors 4 LensZoom (Coarse) 0 to 255 Scaled as % of total control range, which is 0 to 2100128 Locked by channel “Lens shift enable”. 5 LensZoom (Fine) 0 6 LensFocus (Coarse) 0 to 255 Scaled as % of total control range, which is 0 to 2100128 Locked by channel “Lens shift enable”. 7 LensFocus (Fine) 0 8 LensLens Horizontal position (Coarse) 0 to 255 Scaled as % of total control range, which is 0 to 2100128 Locked by channel “Lens shift enable”. 9 LensLens Horizontal position (Fine)0 10 LensLens Vertical position (Coarse) 0 to 255 Scaled as % of total control range, which is 0 to 2100128 Locked by channel “Lens shift enable”. 11 LensLens Vertical position (Fine)0 12 InputInputProjector Channel Selection 1 to 20 Projector Channel 1 to 20 86 LOAD Input Selection 111 to 116 Slot 1, Input 1 to 6 121 to 126 Slot 2, Input 1 to 6 131 to 136 Slot 3, Input 1 to 6 141 to 146 Slot 4, Input 1 to 6 171 EXECUTE255 13 ImageSize0 to 255 Scaled as % of total control range, which is 200 to 400067 14 ImageVertical Stretch0 to 255 Scaled as % of total control range, which is 200 to 300091
Appendix C: DMX / ArtNet Mirage M Series User ManualC-9020-100575-02 Rev. 1 (11-2010) Channel Group Name DescriptionDefault Value Notes 15 MacroFunctionProjector Orientation 0-9 Front Projection 10-19 Rear Projection 20-29 Front Projection Inverted 30-39 Rear Projection Inverted On Screen Display 40-59 OSD On 50-59 OSD Off 60-69 Lens Calibrate 86 LOAD Test Pattern 100-104 Off 105-109 Grid 110-114 Grey Scale 16 115-119 White 120-124 Flat Grey 125-129 Black 130-134 Checker 135-139 13 Point 140-144 Color Bars 145-149 Aspect Ratio 150-154 Edge Blen 155-159 Boresight 171 EXECUTE Image Freeze 200-209 Freeze image 210-219 Unfreeze image255Lens Calibrate is locked by channel “Lens shift enable”.
C-10Mirage M Series User Manual020-100575-02 Rev. 1 (11-2010) Appendix C: DMX / ArtNet Channel Group Name DescriptionDefault Value Notes 16Lamp/ PowerLamp/Power functionsLamp Power Scaled as % of total control range,. Examples are given for 350W and 200W lamps: 00 0% 300 Watt / 150 Watt .... 10 310 Watt / 157 Watt .... 20 320 Watt / 164 Watt .... 30 330 Watt / 171 Watt .... 40 340 Watt / 178 Watt .... 50 350 Watt / 185 Watt .... 60 360 Watt / 192 Watt .... 70 100% 370 Watt / 200 Watt 86 LOAD 171 EXECUTE Lamp Mode 90 Auto select Single Lamp 95 Dual Lamp Mode Power Mode 100 Power Off (Switch lamps off, cool lamps down and go to Standby mode) 105 Power On (Switch lamps on, warm up mode)255 17 ColormetryBrightness0 to 255 Scaled as % of total range, which is 0 to 100128 18 ColormetryContrast0 to 255 Scaled as % of total range, which is 0 to 100128 19 ColormetryGamma0 to 255 Scaled as % of total range, which is -100 to 100128
Appendix C: DMX / ArtNet Mirage M Series User ManualC-11020-100575-02 Rev. 1 (11-2010) Channel Group Name DescriptionDefault Value Notes 20 ColormetryVideo Signal/ Color space, Output ColorColor Space 0-9 RGB 10-19 YCbCr SDTV (ITU-R BT.601) 20-29 YCbCr HDTV (ITU-R BT.709) 86 LOAD Output Color 90-99 Max Drives 100-109 Color Temperature (enables 21) 110-119 SD Video 120-129 HD Video 130-139 User setting 1 140-149 User setting 2 150-159 User setting 3 160-169 User setting 4 171 EXECUTE255 21 ColormetryInterpolated Color (Temperature)*0 to 255 Scaled as % of total control range, which is 3200 to 9300128*Output Color control must be set to “Color Temperature” in DMX channel 20. 22Advanced ImageBlend and Warp/ keystone enableBlend 0-4 Blend disable 5-9 Standard Blend enable 10-14 User Blend 1 enable 15-19 User Blend 2 enable .... 60-64 User Blend 11 enable 86 LOAD 171 EXECUTE Output Color 180-184 Warp/keystone disable 185-189 2D Keystone enable 190-194 Warp 1 enable .... 240-244 Warp 11 enable255The list of warp and blends available depends on the warps and blends saved on the projector by the user. 23Real Time EventsRTE0-9 Cancel current running RTE 10-19 Triggers RTE 1 20-29 Triggers RTE 2 30-39 Triggers RTE 3 40-49 Triggers RTE 4 50-59 Triggers RTE 5 60-69 Triggers RTE 6 70-79 Triggers RTE 7 86 LOAD 171 EXECUTE255 24 ReservedReserved for future expansion 0 25 ReservedReserved for future expansion 0