Christie Projector LWU701i User Manual

40LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Operating
Adjusting the projector’s elevator
Increasing or shortening the length of 
the elevator feet shifts the projection 
position and the projection angle.
Turn the elevator feet each to adjust 
their length.
►Do not lengthen the elevator feet exceeding 30 mm. The foot
lengthened exceeding the limit may come off and drop the projector down, and
result in an injury or damaging the projector.
►Do not...

41LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Operating
The ZOOM or FOCUS dialog appears when you 
press any of the buttons from ZOOM, ZOOM - , 
ZOOM + , FOCUS + and FOCUS -. 
1. Use the ZOOM + / - buttons on the remote 
control or ZOOM button and ◄/► cursor buttons 
on the projector to adjust the screen size.
2. Use the FOCUS  + / - buttons to focus the picture.
Adjusting the lens 
Adjusting the zoom and focus
• The projector may ignore the...

42LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Operating
• The projector may ignore the operation by buttons while moving the lens.
• You can perform the LOAD function using  LENS MEMORY button.NOTE
Adjusting the lens (continued)
This projector is equipped with memory functions for the 
lens adjustments (ZOOM, FOCUS, LENS SHIFT and 
LENS TYPE). Up to three sets of adjustments can be 
stored.
To use the lens memory feature, press the 
LOAD or...

43LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Operating
1.Press AUTO button on the remote control.  
Pressing this button performs the following.
Using the automatic adjustment feature
   For a computer signal 
The vertical position, the horizontal position and the  
horizontal phase are automatically adjusted.  
Make sure that the application window is set to its  
maximum size prior to attempting to use this feature. A dark picture may still be...

44LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Operating
KEYSTONE:  Adjust the vertical and horizontal 
keystone.
3D KEYSTONE:   
Adjust each of the screen corners and 
sides to correct the distortion.
WARPING:   Project an image on several types of 
screen.
• The menu or dialog automatically disappears after several seconds 
of inactivity. Press the GEOMETRY button again, or point the cursor at EXIT in 
the dialog and press the ►or  ENTER button to...

45LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Operating
    3D KEYSTONE: 
When 3D KEYSTONE is pointed at, pressing the 
► or ENTER button displays the 3D KEYSTONE 
dialog. This projector is equipped with a test pattern for 
3D KEYSTONE. Select TEST PATTERNS with 
the 
▲/▼ buttons, then press the ◄/► buttons to 
switch on and off.
1.  Select SETUP with the ▲/▼ buttons and  
 press the 
► or ENTER button.
2.  Select one of the corners or sides to be...

46LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Operating
Correcting the distortion (continued)
4. This projector is equipped with a memory feature for 3D KEYSTONE 
adjustment. Up to three sets of adjustments can be stored.
●  SAVE:   To store the current 3D KEYSTONE adjustment, select one of the "SAVE" 
options numbered 1 to 3 (number of the memory) with the ▲/▼ buttons and 
press the ►, ENTER or INPUT button.  
The current data being stored...

47LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Operating
Using the EDGE BLENDING features
1. Mode (Manual/Camera)
OFF: Disables the Blending function.
 Manual: Allows you to adjust Blending Region or Blending Level by using menu.
Camera:  Allows you to perform automatic adjustment by using Camera in Projector  Blending Tool.
• HDCR LiteLoc is not selectable when Blending is set to other than OFF.
• ECO MODE is not selectable when Blending is set to...

48LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Operating
(continued on next page)  3.1 Displaying Cropping Menu 
Select CROPPING with ▲/▼ buttons and press 
►, 
ENTER or INPUT button to display Cropping Menu. 
 
3.2 Setting Cropping 
Select MODE with ▲/▼ buttons and select ON with 
◄/► buttons. 
The input image is automatically cut out according 
to the settings of Blending Region.
3.  Cropping  When inputting the same image to each projector, The...

49LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Operating
 3.3 Adjusting Cropping Area
Adjust the Cropping Area when cutting out a part of input image.
Select SETUP with ▲/▼ buttons and press 
►, ENTER or INPUT button.
*  MODE is set to [OFF] temporarily and the guide of the Cropping Area  is displayed.
Select [LT]/[WH] with ▲/▼ buttons and press the  ENTER or INPUT button.
Move the guide display with ▲/▼/
◄/► buttons to select the region of the...