Christie Projector LWU701i User Manual

20LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Setting up
Connecting with your devices (continued)
Speakers
(with an amplifi er)
(Wired)
Remote  control Monitor
Another 
projector
LWU601i/LW651i/LW751i/LX801i
LWU701i
Speakers
(with an amplifi er)
(Wired)
Remote  control Monitor
Another 
projector
(continued on next page) 

21LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
• To use a wired remote control, connect a wired remote control to the 
REMOTE CONROL IN  port. You can also connect another projector to the 
REMOTE CONROL OUT  port to control it from the wired remote control. You 
can use this projector as a remote control-relay with the  REMOTE CONROL IN 
and OUT ports. To connect the wired remote control or another projector to the 
REMOTE CONTROL IN  or OUT ports,...

22LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
LWU701i
SDI OUT
Connecting with your devices (continued)
Setting up
• The SDI port of this model supports the following SDI signals:
SD-SDI signal: conforming to SMPTE ST 259-C standard
YCBCR 4:2:2 10-bit
480i, 576i
Single link HD-SDI signal: conforming to SMPTE ST 292 standard YPBPR 4:2:2 10-bit
720p@50/60, 1080i@50/60, 1080sf@25/30
3G-SDI Level-A signal: conforming to SMPTE ST 424 standard YPBPR 4:2:2...

23LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Fasten the HDMI cables by using the HDMI cable holder and the cable tie to pre-
vent them from coming off. Use a cable tie with the size of 2.0 x 4.0mm or smaller. 
Fastening the cables
►Do not fasten the cables other than HDMI.
►To fasten the cable, use a supplied cable tie or plastic tie 
with the size of 2.0 x 4.0mm or smaller.  A metallic tie may cause damage to the 
cables and tie holder.
►Do not...

24LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
When using the USB wireless adapter, use the supplied adapter cover for theft 
prevention.
USB wireless adapter : 
 USB-WL-11N-NS 
Temperature range: 0 ~ 45°C(operating)
1. 
Loosen the screw (marked with triangle) on the bottom left of the  WIRELESS 
port.
2. 
Insert the tab of the cover into the hole at the upper right of the WIRELESS 
port in the direction of the arrow.
3. 
Align the screw holes on...

25LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Setting up
Attaching the terminal cover
Insert the two claws of the terminal cover into the hole of 
the case and confirm two hooks are fitting into the case.
Terminal cover
When detaching the terminal cover, push the hook in 
the direction of the arrow and pull it forward. 
Hook
NOTE  • Do not attach the adapter cover when attaching the terminal cover. 

26LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Using the security bar and slot
A commercially available anti-theft chain or 
wire can be attached to the security bar on 
the projector. Refer to the fi gure to choose 
an anti-theft chain or wire.
This projector has the security slot for the 
Kensington lock. 
For details, see the manual of the security 
tool.
►Do not use the security bars and slot to prevent the projector 
from falling down, as it is...

27LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Setting up
►Do not connect the projector to a power supply while no lens 
unit is attached to it.
►Use extra caution when connecting the power cord, as incorrect or faulty 
connections may result in fire and/or electrical shock.
• Do not touch the power cord with a wet hand.
•  Only use the power cord that came with the projector. If it is damaged, consult  your dealer to get a new one. Never modify the...

28LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Remote control
Installing the batteries
Insert the batteries into the remote control before using it. If the remote control 
starts to malfunction, replace the batteries. If not using the remote control for long 
period, remove the batteries from the remote control and store them in a safe 
place.
1.Holding the hook part of the battery 
cover, remove it.
2.Align and insert the two AA batteries...

29LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
Remote control
Changing the frequency of  remote control signal
The accessory remote control has the two choices on signal frequency Mode 
1:NORMAL and Mode 2:HIGH. If the remote control does not function properly, 
attempt to change the signal frequency.
To set the Mode, press  the combination of two buttons listed below simultaneously 
for about three seconds.
(1)  Set to Mode 1:NORMAL  MENU and MY...