Christie Projector DWU600-G User Manual

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-32
2.  After starting the Christie Presenter application, the main window can b\
een seen (shown below).
Icon Description
Connect and search network display
Stop/start displaying desktop contents to 
connected network display
Select display region
Configure Christie Presenter
Manage all connected network displays
Disconnect all connections
Connect and search network display
1.  Click the button 
 to enter into the connection menu...

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-33
2.  If the IP address of the projector is known, enter the IP address and click the "Connect" button. If the IP address is not known, click the 
"Search" button to search for the projector on the network and select 
the projector to which you want to connect. Select the option "Directly"\
 
in order to proceed to the log in interface.
3.  Input “User type” and “Password” in the log-in interface. Select...

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-34
Select display region Once the connection is set up, click the button 
 to select the size 
of the projection region: FullScreen, FixedSize, or Alterable.
 
y FullScreen: The default capture mode turns to Full screen when the 
program is launched. At that time, if screen capture starts, the image o\
f 
the whole screen is transferred to a remote network display.
 
y FixedSize: FixedSize mode allows the users to place a frame on...

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-35
Configure Christie Presenter Click the button 
 to configure Christie Presenter for Basic Setting 
and Advanced Setting.
 
y Basic Setting: Select language, change the region size of fixed size 
capture mode, and select if notification message popup is allowed.
 
y Advanced Setting: Select the quality of JPEG image, YUV sample format 
and network port setting. (The "Fixed" port is Port 5900) 

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-36
Manage all connected network displays Click the button 
 to control all the users and all the projectors 
connector to the same projector.
Icon Description
Administrator log in.
Normal user log in.
Device is connected.
Device is not connected.
The icon shows the current status and 
display position of the local screen on the 
network display. Click on the icon to change 
the display position. A dialog box will appear. 
Click...

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-37
4.11  Card Reader Operation
There are four operation modes in the Card Reader application: - USB Flash Devices Detection Screen
 - Thumbnail Display Mode
 - Images Display Mode
 - Images Slide Show Mode
1.  USB Flash Device Detection Screen:  In this mode, the Card Reader application detects any USB flash devices 
hot-plug events and displays the flash device icon. When the flash device 
is removed from USB, the icon...

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-38
 The user interface is designed to operate the card reader application wi\
th 
a few keys (Enter/Left/Right/Up/Down).
The following buttons are supported in the user interface:
 
y Previous: Move the selected item left. (Go to previous page when this i\
s 
the leftmost item)
 
y Next: Move the selected item right. (Go to next page when this is the 
rightmost item.)
 
y Display: Display the selected image or display the selected...

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-39
The following operations are supported in the operation UI.
 
y Display: Enter the Image Display Mode.
 
y Thumbnail: Enter the Thumbnail Display Mode.
 
y SlideShow: Enter the Slide Show Mode.
 
y Actual Size: Display in actual size of the image.
 
y Best Fit: Display the image in best fit to the screen.
 
y EXIFDisp OFF/On: Enable/Disable EXIF information display.
 
y +90deg: Rotate 90 degree.
 
y -90deg: Rotate -90 degree....

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-40
 When the image can NOT be displayed due to memory limitation or can 
NOT support image format, the specific image is displayed on the center 
of the screen. 

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-41
The projector automatically detects the lamp life. When the lamp life is\
 
nearing the end of use, you will receive a warning message. "When you se\
e 
this message, please change the lamp as soon as possible." Make sure the\
 
projector has been cooled down for at least 30 minutes before changing t\
he 
lamp. 
4.12  Install the Lamp
1.  Turn off the lamp: Turn the projector OFF and disconnect the power cord....