Christie Projector DWU600-G User Manual

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-32
2.  After starting the Christie Presenter application, the main window can b\
een seen (shown below).
Icon Description
Connect and search network display
Stop/start displaying desktop contents to 
connected network display
Select display region
Configure Christie Presenter
Manage all connected network displays
Disconnect all connections
Connect and search network display
1.  Click the button 
 to enter into the connection menu section. 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-33
2.  If the IP address of the projector is known, enter the IP address and click the "Connect" button. If the IP address is not known, click the 
"Search" button to search for the projector on the network and select 
the projector to which you want to connect. Select the option "Directly"\
 
in order to proceed to the log in interface.
3.  Input “User type” and “Password” in the log-in interface. Select 
the display port (the default is full screen). Obtain the " Normal " 
user's password from the OSD menu Main Menu > Configuration > 
Communications > WLAN. 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-34
Select display region Once the connection is set up, click the button 
 to select the size 
of the projection region: FullScreen, FixedSize, or Alterable.
 
y FullScreen: The default capture mode turns to Full screen when the 
program is launched. At that time, if screen capture starts, the image o\
f 
the whole screen is transferred to a remote network display.
 
y FixedSize: FixedSize mode allows the users to place a frame on the 
desktop. Only the image enclosed inside the frame is transferred to 
remote network display.
 
y Alterable: In Alterable mode the only region captured is the one 
enclosed by the frame. The region can be enlarged or downsized by 
dragging the eight small black squares scattered on eight edges of the 
frame. 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-35
Configure Christie Presenter Click the button 
 to configure Christie Presenter for Basic Setting 
and Advanced Setting.
 
y Basic Setting: Select language, change the region size of fixed size 
capture mode, and select if notification message popup is allowed.
 
y Advanced Setting: Select the quality of JPEG image, YUV sample format 
and network port setting. (The "Fixed" port is Port 5900) 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-36
Manage all connected network displays Click the button 
 to control all the users and all the projectors 
connector to the same projector.
Icon Description
Administrator log in.
Normal user log in.
Device is connected.
Device is not connected.
The icon shows the current status and 
display position of the local screen on the 
network display. Click on the icon to change 
the display position. A dialog box will appear. 
Click this unlock icon to change the 
password. (Password change to target 
network display. Only an Administrator user 
can change the password.)
No response is expected when this icon is 
clicked. If user log in as "Admin", the key icon 
can be seen and the Presenter password 
can be changed. If user log in as "Normal", 
the lock icon can be seen and the Presenter 
password can't be changed.
Disconnect from target network display.
Link for connecting to a target network 
display via a webpage. 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-37
4.11  Card Reader Operation
There are four operation modes in the Card Reader application: - USB Flash Devices Detection Screen
 - Thumbnail Display Mode
 - Images Display Mode
 - Images Slide Show Mode
1.  USB Flash Device Detection Screen:  In this mode, the Card Reader application detects any USB flash devices 
hot-plug events and displays the flash device icon. When the flash device 
is removed from USB, the icon disappears. It is suggested that USB flash 
devices should be removed only when the Card Reader is changed to the 
USB Flash Devices Detection Screen state.
2.  Thumbnail  Display Mode: Press the Enter key to enter the Thumbnail Display Mode. Different photo\
s 
in different folders can be chosen. Press the Menu key to bring up the 
Card Reader operation UI. 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-38
 The user interface is designed to operate the card reader application wi\
th 
a few keys (Enter/Left/Right/Up/Down).
The following buttons are supported in the user interface:
 
y Previous: Move the selected item left. (Go to previous page when this i\
s 
the leftmost item)
 
y Next: Move the selected item right. (Go to next page when this is the 
rightmost item.)
 
y Display: Display the selected image or display the selected folder.
 
y Thumbnail: Enter the Thumbnail Display Mode.
 
y SlideShow: Enter the Slide Show Mode. 
 
y NameOrder: Sort files/folders in name order.
 
y ExtendOrder: Sort files/folders in extended order.
 
y SizeOrder: Sort files/folders in size order.
 
y TimeOrder: Sort files/folders in time order.
 
y EXIF ON/OFF: Enable/Disable auto image rotate accordingly to EXIF 
information.
 
y FileName ON/OFF: Enable/Disable filename display in Thumbnail Display 
Mode.
3.  Image Display Mode:  Press the ENTER key in the Thumbnail Display Mode to enter the Image 
Display Mode; press the SlideShow key to enter the Slide Show Mode.
 The Left/Right key is used to display the last/next image in the Image 
Display Mode. In the Image Display Mode, press the ENTER key to quit 
from the Image Display Mode and enter the Thumbnail Display Mode.
 In the Slide Show Mode, press the ENTER key to enter the Image Display 
Mode.
 The alternative way to display image in the Image Display Mode or Slide \
Show Mode is using the operation UI. 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-39
The following operations are supported in the operation UI.
 
y Display: Enter the Image Display Mode.
 
y Thumbnail: Enter the Thumbnail Display Mode.
 
y SlideShow: Enter the Slide Show Mode.
 
y Actual Size: Display in actual size of the image.
 
y Best Fit: Display the image in best fit to the screen.
 
y EXIFDisp OFF/On: Enable/Disable EXIF information display.
 
y +90deg: Rotate 90 degree.
 
y -90deg: Rotate -90 degree.
4.  Image Slide Show Mode:
 The following operations are supported in the Slide Show Mode operation \
UI.
 
y Stop: Stop Slide Show Mode.
 
y Next: Display next image.
 
y Previous: Display previous image.
 
y Delay 3/4/5: Slide Show delay in seconds.
 
y Slide Effect: Following modes are supported.
 - o Slide Right
 - o Blocks
 - o RightDown
 - o XLines
 - o Slide Up
 - o Ylines
 - o Repeat ON/OFF: Enable/Disable Slide Show Repeat Mode. 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-40
 When the image can NOT be displayed due to memory limitation or can 
NOT support image format, the specific image is displayed on the center 
of the screen. 
						

							G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-41
The projector automatically detects the lamp life. When the lamp life is\
 
nearing the end of use, you will receive a warning message. "When you se\
e 
this message, please change the lamp as soon as possible." Make sure the\
 
projector has been cooled down for at least 30 minutes before changing t\
he 
lamp. 
4.12  Install the Lamp
1.  Turn off the lamp: Turn the projector OFF and disconnect the power cord. 
Installation Steps:
2. Wait for lamp to cool down:  Allow the projector to cool down for at least 30 minutes.
3.  Open the lamp door:  Push the door latch to open lock. 
Loosen the captive screw securing the lamp door. Open the lamp door.