Christie Projector DWU600-G User Manual

USER MANUAL
020-000648-01
G Series
DWX600-G/DHD600-G/DWU600-G 

Addendum
The CD included with this printed manual contains an electronic copy in English. Please read all instructions before 
using or servicing this product.
Die mit dieser gedruckten Anleitung gelieferte CD enthält eine elektronische Kopie in Deutsch. Bitte lesen Sie alle 
Anweisungen, bevor Sie dieses Produkt verwenden oder warten.
Le DC fourni avec ce manuel imprimé contient une copie électr onique en français. Sil vous plaît lire toutes les 
instructions avant dutiliser ou de réparer ce produit.
Il...

NOTICES
COPYRIGHT AND TRADEMARKS
© 2014 Christie Digital Systems USA, Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks \
or trade names of 
their respective holders.
REGULATORY
The product has been tested and found to comply with the limits for a Cl\
ass A digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provi\
de reasonable protection 
against harmful interference when the product is operated in a commercia\
l...

GENERAL
Every effort has been made to ensure accuracy, however in some cases cha\
nges in the products 
or availability could occur which may not be reflected in this document. Christie reserves the right 
to make changes to specifications at any time without notice. Performance specifications are 
typical, but may vary depending on conditions beyond Christie's control \
such as maintenance of 
the product in proper working conditions. Performance specifications are based on information 
available at...

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Table of Contents
i
1.  SAFETY
2.  INTRODUCTION
2.1  Projector Components ........................................................................\
.......................... 2-1
2.2  Built-in Keypad ........................................................................\
..................................... 2-4
2.3  Input/Output (I/O) Panel ........................................................................\
....................... 2-5
2.4...

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Table of Contents
ii6.7  Federal Communications Commission (FCC) Warning ................................................ 6-10
6.8  OSD Tree ........................................................................\
............................................. 6-11
6.9  Preset Mode tables ........................................................................\
............................... 6-19 

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 1: Safety
1-1
1.  SAFETY
Read through this document in its entirety and understand all warnings a\
nd 
precautions before attempting to operate the projector.  
y Do not look into the projector lens when the lamp is on. The bright ligh\
t 
may result in permanent eye damage.
 
y To reduce the risk of fire or electric shock, do not expose this projector to 
rain or moisture.
 
y Do not open or disassemble the projector as this may cause electric...

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 1: Safety
1-2
 
y Always power down the projector and disconnect all power sources before \
servicing or cleaning.
 
y Use a soft cloth moistened with a mild detergent to clean the display 
housing.
 
y Disconnect the power plug from the AC outlet if the product is not being\
 
used for an extended period of time.
 
y Operate the projector under the following conditions:
 
-
Operating temperature range: 5°C to 35°C
 
-
Storage temperature...

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 2: Introduction
2-1
2.  INTRODUCTION
The product specified in this document is a high brightness, high-resolution 
video/graphics 1-chip mercury lamp based projector. The projector is ava\
ilable 
in WXGA, HD and WUXGA resolutions. The projector utilizes Digital Light \
Processing (DLP
®) technology from Texas Instruments. It is primarily designed 
for fixed installation markets.
2.1  Projector Components
Front View
2
1
4
Ind. Part Name...

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 2: Introduction
2-2
Rear View1
5
2
3
6
4
Ind. Part NameDescription
1 Rear IR Sensor Receives signals from the IR remote. Keep the signal 
path unobstructed for uninterrupted communication 
with the projector.
2 Input/Output (I/O) 
Panel Connects the projector to external devices.
3 Cooling Air Vents 
(Exhaust) Keep these vents unobstructed to prevent the projector 
from overheating.
4 AC Input Connect to the supplied power adapter.
5 Power...