Christie Projector DWU600-G User Manual

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-22
4.9  Web User Interface
4.9.1 Logging On
Open your web browser and type the IP address (in the address bar) assigned 
to your projector.
1 Select the log in level from the Access type drop-down list
2 Enter the Password in the Password field
3 Select the appropriate language from the Language drop-down list.
4 Click the Press login button. The Main window appears. 
4.9.2 Main Tabbed Page – General 

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-23
 
y Control Panel
 Select main source / PIP source, enable/disable PIP/PBP, change the 
layout / PIP size, swap, and change the test pattern. 
 
y Projector Information Panel
 Check the projector information for power status, Pic mute status, OSD 
status, IP address and Mac address.
 
y Switch Panel
Switch the on/off status of power, Pic mute, and OSD.
4.9.3 Main Tabbed Page – Status
 Display the current status of lamp info,...

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-24
4.9.4 Main Tabbed Page – Lens
 Control the focus, lens shift and zoom adjustments for the lens.
4.9.5 Network 

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-25
 
y Restart Network
Execute a Network restart. This will not change any of the network 
settings.
 
y Network Factory Reset
Execute a network factory reset. Network settings will be reset to 
the following default values:
 - Projector Name = Christie@ + Serial Number
 - Show Network Messages = ON
 - LAN Settings:
 - Manual
 -IP Address = 192.168.0.100
 - Subnet Mask = 255.255.255.0
 - Default Gateway = 192.168.0.100
 - WLAN...

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-26
 - Enter the IP address range, netmask and default gateway for the wireless LAN.
 
y SNMP Panel 
 - The G Series SNMP (Simple Network Management Protocol) interface  provides network administrators with a common way to manage their 
network devices from a single remote location. SNMP allows an 
administrator to query a number of devices to see their current status/
configuration. It also allows operators to change configuration...

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-27
4.9.6 Tools
 Use the Tools tabbed pages to control “Size & Position”, “Image Settings”, 
“Configuration”, “Lamp”, “Input Switching & PIP” and “Test Pattern”. 
4.9.7 Administrator Page
 Add or delete a user or change password 

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-28
4.9.8 About Page
 
y Version Tab
 View the main firmware version, network firmware version, projector model 
name, and projector serial number.
 
y License Tab
 The license information of the computer program is displayed. 

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-29
4.10  Christie Presenter
The Christie Presenter application allows a remote desktop from a host P\
C 
to be displayed on the network display through Ethernet, USB, or wireles\
s 
transports. It can adapt to different network settings (DHCP, fixed IP, and 
direct link by USB/Ethernet cable).
Christie Presenter can be downloaded from the Christie website or from t\
he 
web page of the projector. 
4.10.1 Connect to the Projector...

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-30
 
`Power on the Projector.
 
`Obtain the WiFi SSID from the OSD menu Main Menu > 
Configuration > Communications > WLAN
 
`Connect your PC device to the wireless SSID for the selected 
projector . Example:  “Christie@0111000123”.
4.10.2 Install Christie Presenter software
1.  Use a web browser to connect to the projector’s network address (Def\
ault 
address 192.168.1.100)
2.  Download and install the Christie Presenter Software 

G Series User Manual020-000648-01  Rev. 3 (02-2014)
Section 4: Operation
4-31
3. Configure the Christie Presenter Software. The name entered is used to 
identify all computers connected to the projector via  the Christie Pres\
enter 
software via either wired or wireless connections.  The Network Display \
Management -> Device Management tab will show all current connections.
4.10.3 Use Christie Presenter
1. Press the autorun icon in the system tray to pause or play the USB display.