Christie Projector D13HD-HS User Manual

   Operation
HS Series User Manual51
020-000883-01 Rev. 1 (04-2016)
Main tab–General
Displays information about the projector, its power status, and what is selected for the main and 
PIP/PBP input sources.
Main tab–Status
Displays the current status of light source, cooling (fans), version numbers and signal (source) 
information.
Main tab–Lens
Controls the focus, lens shift, and zoom adjustments for the lens.
PanelDescription
Control Selects main source/PIP source, enables or di sables PIP/PBP, changes...

   Operation
HS Series User Manual52
020-000883-01 Rev. 1 (04-2016) 

   Operation
HS Series User Manual53
020-000883-01 Rev. 1 (04-2016)
Network
If you change a setting, the network subsystem of the projector may restart, and you may be 
logged off.
PanelDescription
Restart 
Network Execute a network restart. This does 
not change any of the network settings. 

   Operation
HS Series User Manual54
020-000883-01 Rev. 1 (04-2016)
Network 
Factory Reset Execute a network factory reset. Network settings may be reset to the following default values.
Projector Name = Christie@ + Serial Number
Show Network Messages = ON
LAN settings:
• Manual
• IP Address = 192.168.0.100
• Subnet Mask = 255.255.255.0
• Default Gateway = 192.168.0.100
WLAN settings:
• Enabled
• Start IP = 192.168.1.100
• End IP = 192.168.1.120
• Subnet Mask = 255.255.255.0
• Default Gateway =...

   Operation
HS Series User Manual55
020-000883-01 Rev. 1 (04-2016)
SNMP Panel Provides network administrators with a common way to manage their network devices from a  single remote location.  Administrators can use the Simple Network Management Protocol (SNMP) 
interface to query a number of devices to see thei r current status or configuration. Operators can 
change configuration values and configure trap notifications to be sent when certain events occur 
(for example, loss of signal, power state...

   Operation
HS Series User Manual56
020-000883-01 Rev. 1 (04-2016)
To o l s
Use the Tools pages to control size and position, image settings, configuration, light source, input 
switching, PIP, and test patterns.
Administrator Page
Add or delete a user or change password.
About Page
The About page provides version and license information about HS Series.
TabDescription
Version  Views the main firmware version, network firmware version, projector model name, and 
projector serial number.
License Displays...

   Operation
HS Series User Manual57
020-000883-01 Rev. 1 (04-2016)
Christie Presenter
The Christie Presenter application allows a remote desktop from a host PC to be displayed on the 
network display through Ethernet or wireless transports. It can adapt to different network settings 
(DHCP, fixed IP, and direct link by Ethernet cable).
Download Christie Presenter from the Christie website or from the web page of the projector.
Connecting to the Projector
Before using Christie Presenter, you must connect...

   Operation
HS Series User Manual58
020-000883-01 Rev. 1 (04-2016)
d. Connect your PC device to the wireless SSID for the selected projector, for example: 
Christie@0111000123.
Installing the Christie Presenter software
Install and configure the Christie Presenter software.
1. In a web browser, connect to the projectors network address.The default address is 192.168.1.100.
2. Download and install the Christie Presenter software. 

   Operation
HS Series User Manual59
020-000883-01 Rev. 1 (04-2016)
3. Configure the Christie Presenter software. 
The name entered identifies all computers connected to the projector by the Christie Presenter 
software—either wired or wireless connections. The  Network Display Management > Device 
Management  tab shows all current connections. 

   Operation
HS Series User Manual60
020-000883-01 Rev. 1 (04-2016)
Using the Christie Presenter
1. To pause or play the USB display, in the system tray, press  Autorun.
After starting the Christie Presenter application, the main window appears.
IconDescription
Connects and searches the network display.
Stops or starts displaying desktop cont ents to the connected network display.
Selects a display region.
Configures Christie Presenter.
Manages all connected network displays.
Disconnects all connections.