Christie Projector D13HD-HS User Manual

   Operation
HS Series User Manual31
020-000883-01 Rev. 1 (04-2016)
Size and Position menu
The Size and Position menu determines the size and position of the image on the screen.
Menu itemDescriptionOptions
Size Presets Displays an image with the detected size, or  resizes the image by maximizing either the 
height, width, both, or resizes to the maximum 
size possible while keeping the original aspect 
ratio. • Auto—Displays with the detected size.
• Native—Displays in its native resolution.
•...

   Operation
HS Series User Manual32
020-000883-01 Rev. 1 (04-2016)
Pixel Phase Adjust the pixel phase when the image shows  shimmer or noise after pixel tracking is 
optimized. Pixel phase can adjust the phase of 
the pixel-sampling clock relative to the incoming 
signal. (Analog RGB signals only.)
Horz Position Moves the image right or left within the area of  available pixels.
Vert Position Moves the image up or down within the area of  available pixels.
Digital Horz 
Zoom Changes the size of...

   Operation
HS Series User Manual33
020-000883-01 Rev. 1 (04-2016)
Geometry correction
Geometry correction provides two ways for warping control:
• PC Mode off—User can do simple horizontal and vertical keystone, pincushion, and 4-corner control by using the on-screen display.
• PC Mode on—User can do arbitrary warping or blending control by using the PC APP provided  separately.
The following table provides information about the geometry correction feature compatibility:
Horz Keystone
Adjust the...

   Operation
HS Series User Manual34
020-000883-01 Rev. 1 (04-2016)
Vert Pincushion
Adjust the pincushion vertically and make the image more square.
4-Corner
Allow the image to be squeezed to fit an area defined by moving each of the four corners x and y 
position.
Reset
Reset all Geometry Correction parameters.
Ind.1080PWUXGA
A 6.25%6.25%
B 6.67%6.67%
Ind.1080PWUXGA
A9.67%7.44%
B9.83% 7.58%
AB
AA
B
B
B
B
AA 

   Operation
HS Series User Manual35
020-000883-01 Rev. 1 (04-2016)
Image Settings menu
The Image Settings menu sets the brightness, contrast, and other settings for images.
Menu itemDescriptionOptions
Brightness Adjusts the intensity of the image. —
Contrast Adjusts the degree of difference between the  lightest and darkest parts of the image and 
changes the amount of black and white in the 
image. —
Color Space Selects a color space specifically tuned for the  input signal. Only useful for analog...

   Operation
HS Series User Manual36
020-000883-01 Rev. 1 (04-2016)
Video Options Applies only to video sources. • Color—Adjusts a video image from black 
and white to fully saturated color. (Video 
sources only.)
• Tint—Adjusts the red-green color balance  in the image of NTSC video images. (NTSC 
video sources only.)
• Detect Film—Controls film mode detection  and determine whether the original source 
of the input video was film or video.
Input  Levels Applies  to  VGA  or  component  signals  only. •...

   Operation
HS Series User Manual37
020-000883-01 Rev. 1 (04-2016)
Save to User Saves the user settings.
Adjust the image settings and  Select Save to 
User  as a picture setting. To recall these settings 
in the future, select the  User in the Picture 
Settings  menu. 
You can save the following settings:
• Brightness
• Contrast
• Color
• Tint
• Red Gain
• Green Gain
• Blue Gain
• Red Offset
• Green Offset
• Blue Offset
• Color Temperature
• Gamma
•Detail
•White Peaking
•Overscan —
Contrast...

   Operation
HS Series User Manual38
020-000883-01 Rev. 1 (04-2016)
Configuration Menu
The Configuration menu sets the language, projection orientation, power usage, and other 
preferences for the projector.
Menu itemDescriptionOptions
Language Selects an available language  for the on-screen display. • English
• French
• German
• Italian
• Spanish
• Chinese (Simplified)
• Japanese
• Korean
• Russian
Lens Settings Adjusts the lens. • Focus and Zoom—Adjust the focus and zoom the image in or  out.
• Lens...

   Operation
HS Series User Manual39
020-000883-01 Rev. 1 (04-2016)
Ceiling Mount Turns the image upside down  for ceiling-mounted 
projection. —
Rear  Projection Reverse the image so you can  project from behind a 
translucent screen. —
Menu 
Preferences Sets the on-screen display 
menu preferences, and the 
password for the projector. • Menu Horz Offset—Changes the horizontal position of the on-
screen display.
• Menu Vert Offset—Changes the vertical position of the on- screen display.
• Show...

   Operation
HS Series User Manual40
020-000883-01 Rev. 1 (04-2016)
12V Trigger Sets the 12V trigger on or off. 
The 12V trigger is used for 
electrical projector screens. 
The projector screen is 
automatically lowered or 
raised when the projector is 
switched on or off. —
Communications Determines the  communication settings such 
as network setup, serial port 
information, and so on. Network—Allow you to setup network settings.
• DHCP—Turns the DHCP on or off.
• IP Address—Assigns the network IP...