Christie Projector D13HD-HS User Manual

							   Operation
HS Series User Manual51
020-000883-01 Rev. 1 (04-2016)
Main tab–General
Displays information about the projector, its power status, and what is selected for the main and 
PIP/PBP input sources.
Main tab–Status
Displays the current status of light source, cooling (fans), version numbers and signal (source) 
information.
Main tab–Lens
Controls the focus, lens shift, and zoom adjustments for the lens.
PanelDescription
Control Selects main source/PIP source, enables or di sables PIP/PBP, changes the layout or PIP size, 
swap, and change the test pattern.
Projector 
Information Check the projector information for power status, Pic mute status, on-screen display status, IP 
address, and MAC address.
Switch Switches the on or off status of  Power, Pic Mute, and on-screen display. 
						

							   Operation
HS Series User Manual52
020-000883-01 Rev. 1 (04-2016) 
						

							   Operation
HS Series User Manual53
020-000883-01 Rev. 1 (04-2016)
Network
If you change a setting, the network subsystem of the projector may restart, and you may be 
logged off.
PanelDescription
Restart 
Network Execute a network restart. This does 
not change any of the network settings. 
						

							   Operation
HS Series User Manual54
020-000883-01 Rev. 1 (04-2016)
Network 
Factory Reset Execute a network factory reset. Network settings may be reset to the following default values.
Projector Name = Christie@ + Serial Number
Show Network Messages = ON
LAN settings:
• Manual
• IP Address = 192.168.0.100
• Subnet Mask = 255.255.255.0
• Default Gateway = 192.168.0.100
WLAN settings:
• Enabled
• Start IP = 192.168.1.100
• End IP = 192.168.1.120
• Subnet Mask = 255.255.255.0
• Default Gateway = 192.168.1.100
 SNMP settings:
• SNMP Read Community = private
• Trap IP Address = 0.0.0.0
• SMTP IP Address = 0.0.0.0
• All other settings are cleared or blanked
Trap Configuration:
• All items = SNMP Trap + Email
LAN Setting 
Panel • Sets if the projector must obtain an automatica
lly assigned IP address through DHCP or if the 
user sets the address manually.
• For the TCP/IP setting, enter the IP a ddress, netmask, and default gateway address.
WLAN Setting 
Panel • Enables or disables the wireless LAN of the projector.
• Enter the IP address range, netmask, and default gateway for the wireless LAN.
PanelDescription 
						

							   Operation
HS Series User Manual55
020-000883-01 Rev. 1 (04-2016)
SNMP Panel Provides network administrators with a common way to manage their network devices from a  single remote location.  Administrators can use the Simple Network Management Protocol (SNMP) 
interface to query a number of devices to see thei r current status or configuration. Operators can 
change configuration values and configure trap notifications to be sent when certain events occur 
(for example, loss of signal, power state change, and so on).
Emails are sent to the mail server configured  in the projector settings. Up to two user email 
accounts can be selected. Important information  regarding the event is located in the body 
content of the email.
SNMP Traps are notifications that are sent from th e projector. They are only received by a trap 
receiver (MIB Browser) in the computer.
• SNMP Read Community (default setting: priv ate)—Plain text password that must also be 
entered in the MIB browser. This password allows various settings in the projector to be 
queried.
• SNMP Location (default setting: blank)—Use as  a description to where a projector is located in 
a building. SNMP emails sent specify this location.
• Trap IP Address (default setting: 0.0.0.0)—Fill in this field with the IP address of the computer,  on which you want to view received traps from the projector. 
• Trap Email 1/2 (default setting: Blank)—Set  the Trap Email 1 and 2 to an email address 
configured under the mail server entered in the SMTP Server IP Address field.
• Email from Address (default setting: blank)—Set  the name of the source of the SNMP emails.
• SMTP Server IP Address (default setting: 0.0.0.0)—Enter the IP address of the mail server.
Tr a p  
Configuration 
Panel Set the SNMP actions for the system events. The options are: 
• SNMP Trap
• + Email
• Email
• SNMP Trap
• Disabled
Crestron 
Control System 
Panel Enter the IP address, IP ID, and port of Crestron device for the connection.
PanelDescription 
						

							   Operation
HS Series User Manual56
020-000883-01 Rev. 1 (04-2016)
To o l s
Use the Tools pages to control size and position, image settings, configuration, light source, input 
switching, PIP, and test patterns.
Administrator Page
Add or delete a user or change password.
About Page
The About page provides version and license information about HS Series.
TabDescription
Version  Views the main firmware version, network firmware version, projector model name, and 
projector serial number.
License Displays the license information of the computer program. 
						

							   Operation
HS Series User Manual57
020-000883-01 Rev. 1 (04-2016)
Christie Presenter
The Christie Presenter application allows a remote desktop from a host PC to be displayed on the 
network display through Ethernet or wireless transports. It can adapt to different network settings 
(DHCP, fixed IP, and direct link by Ethernet cable).
Download Christie Presenter from the Christie website or from the web page of the projector.
Connecting to the Projector
Before using Christie Presenter, you must connect to the projector.
1. Connect to the projector using WiFi or Ethernet.Ethernet connection:
a. To determine the projectors IP address, select  Main Menu > Configuration  > 
Communications  > LAN .
b. Configure your PC IP address to be on the same network as the projector.
c. The projector and computer must be connected directly or over the network using  Ethernet.
WiFi Wireless connection:
a. Insert the WiFi USB dongle (1DWUSB-BGN) into the USB port on the projector input panel.
For more information about the WiFi USB dongle, see  Optional accessories on page 79.
b. Power on the projector.
c. Obtain the WiFi SSID from  Main Menu > Configuration  > Communications  > WLAN .
LAN
1. DHCP
2. IP Address
3. Subnet Mask
4. Default Gateway
5. MAC Address 
						

							   Operation
HS Series User Manual58
020-000883-01 Rev. 1 (04-2016)
d. Connect your PC device to the wireless SSID for the selected projector, for example: 
Christie@0111000123.
Installing the Christie Presenter software
Install and configure the Christie Presenter software.
1. In a web browser, connect to the projectors network address.The default address is 192.168.1.100.
2. Download and install the Christie Presenter software. 
						

							   Operation
HS Series User Manual59
020-000883-01 Rev. 1 (04-2016)
3. Configure the Christie Presenter software. 
The name entered identifies all computers connected to the projector by the Christie Presenter 
software—either wired or wireless connections. The  Network Display Management > Device 
Management  tab shows all current connections. 
						

							   Operation
HS Series User Manual60
020-000883-01 Rev. 1 (04-2016)
Using the Christie Presenter
1. To pause or play the USB display, in the system tray, press  Autorun.
After starting the Christie Presenter application, the main window appears.
IconDescription
Connects and searches the network display.
Stops or starts displaying desktop cont ents to the connected network display.
Selects a display region.
Configures Christie Presenter.
Manages all connected network displays.
Disconnects all connections.