Christie Projector D13HD-HS User Manual
Have a look at the manual Christie Projector D13HD-HS User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 476 Christie manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Specifications HS Series User Manual81 020-000883-01 Rev. 1 (04-2016) Warnings • If the condition of the power input is abnormal, the projector displays the following warning: The following table provides information about the power input behavior. • If the filter is installed incorrectly, the projector displays the following warning: • Pump is malfunctioning, for example the motor or pump has stopped operating. The projector displays one of the following warnings: • If the end-user presses the source key on the IR remote keypad that is not supported, for example BNC(2), the projector displays the following warning: Maximum power consumption Input 1 1500W Input 2 1400W ConditionInputProjector Behavior (Light Source Mode) AC SocketInput Voltage Normal 110V 110V Full (100% power) Abnormal 110V 220VECO 2 (50% power); displays warning message Normal 220V 220V Full (100% power) Abnormal 220V 110VECO 2 (50% power); displays warning message ParameterRequirement Incorrect AC power detected. The projector is running in reduced brightness mode (ECO 2). Ensure the proper power is being provided to the selected projector input. Filter is installed incorrectly. Power off the projector and check the filter installation. Pump 1 is not working as expected. Check pump functionality. Pump 2 is not working as expected. Check pump functionality. Not supported
Specifications HS Series User Manual82 020-000883-01 Rev. 1 (04-2016) Regulatory This product conforms to the following regulations related to product safety, environmental requirements and electromagnetic compatibility (EMC). Safety • CSA C22.2 No. 60950-1 • UL 60950-1 • IEC 60950-1 • EN 60950-1 Laster safety • IEC 60825-1 • IEC 62471 • FDA CDRH CFR 1040.10 • FDA CDRH CFR 1040.11 Electro-Magnetic Compatibility Emissions • FCC CFR47, Part 15, Subpart B/ANSI C63.4, Class A - Unintentional Radiators • CISPR 22/EN55022 Class A - Information Technology Equipment • ICES/NMB003 (A) - Information Technology Equipment Immunity • CISPR 24/EN55024 EMC Requirements - Information Technology Equipment Environmental • The product conforms to: • EU Directive (2011/65/EU) on the restriction of the use of certain hazardous substances (RoHS) in electrical and electronic equipment and the applicable official amendment(s). • EU Regulation (EC) No. 1907/2006 on the registration, evaluation, authorization and restriction of chemicals (REACH) and the applicable official amendment(s). • EU Directive (2012/19/EU) on waste and electr ical and electronic equipment (WEEE) and the applicable official amendment(s). • China Ministry of Information Industry Order No.39 (02/2006) on the control of pollution caused by electronic information products, the hazardous substances concentration limits (SJ/T11363-2006), and the applicable product marking requirement (SJ/T11364-2006).
Specifications HS Series User Manual83 020-000883-01 Rev. 1 (04-2016) Federal Communications Commission (FCC) warning • Only use the supplied power cord. On-screen display tree The following table provides the on-screen display menu tree. Level 1Level 2Level 3 (Or List)Level 4 (Or List)Level 5 (Or List)Level 6 (Or List)Default Size & Position Size Presets Auto Auto Native 4:3 Letterbox Full Size Full Width Full Height Custom 3D Mode Overscan Off By source set Zoom Crop Pixel Track 0 to 100 50 Pixel Phase 0 to 100 50 Horz Position 0 to 100 50 Vert Position 0 to 100 50 Digital Horz Zoom 50% to 400% 100 Digital Vert Zoom 50% to 400% 100 Digital Horz Shift 0 to 100 50 Digital Vert Shift 0 to 100 50 Geometry Correction PC Mode On/Off Off
Specifications HS Series User Manual84 020-000883-01 Rev. 1 (04-2016) Size & Position Geometry Correction Warp Keystone Horz Keystone 0 to 40 20 Vert Keystone 0 to 40 20 Pincushion Horz Pincushion 0 to 100 50 Vert Pincushion 0 to 100 50 4-Corner Top Left Horz Adjust 0 to 120 (pixel)0 To p L e f t V e r t Adjust 0 to 80 (pixel)0 Top Right Horz Adjust 0 to 120 (pixel)0 Top Right Vert Adjust 0 to 80 (pixel)0 Bottom Left Horz Adjust 0 to 120 (pixel)0 Bottom Left Vert Adjust 0 to 80 (pixel)0 Bottom Right Horz Adjust 0 to 120 (pixel) 0 Bottom Right Vert Adjust 0 to 80 (pixel) 0 Reset Command Auto Image Normal Wide Wide Image settings Brightness 0 to 100 50 Contrast 0 to 100 By source set Color Space Auto Auto RGB RGB Full RGB Full RGB Limited REC709 YUV REC709 REC709 REC601 Level 1Level 2Level 3 (Or List)Level 4 (Or List)Level 5 (Or List)Level 6 (Or List)Default
Specifications HS Series User Manual85 020-000883-01 Rev. 1 (04-2016) Image settings Detail Maximum By source set High Normal Low Minimum 3D Display 3D Enable Auto Auto Frame Packing Side by Side Top and Bottom Frame Sequential Off 3D Invert Off Off On Toggle 3D Blending Enter key N/A Video Options Color 0 to 100 50 Tint 0 to 100 50 Detect Film Off Off On Input Levels Red Gain 0 to 100 50 Green Gain 0 to 100 50 Blue Gain 0 to 100 50 Red Offset 0 to 100 50 Green Offset 0 to 100 50 Blue Offset 0 to 100 50 Sync Threshold 0 to 100 50 Reset RGB Gain/ Offset Command Level 1Level 2Level 3 (Or List)Level 4 (Or List)Level 5 (Or List)Level 6 (Or List)Default
Specifications HS Series User Manual86 020-000883-01 Rev. 1 (04-2016) Image settings Picture Settings Presentation By source set Video Bright REC709 Real DICOM SIM 2D High Speed 3D Blending User Save to User command Contrast Enhancement Off Off DynamicBlack™ RealBlack Image Freeze Off Off On Advanced Image Settings Gamma Video By source set Film Bright CRT DICOM White Peaking 0 to 100 By source set Color Te m p e r a t u r e Warm By source set Bright Cool Edge Enhancement Off Off Normal Maximum Color Wheel Speed 2X 3X 3X Level 1Level 2Level 3 (Or List)Level 4 (Or List)Level 5 (Or List)Level 6 (Or List)Default
Specifications HS Series User Manual87 020-000883-01 Rev. 1 (04-2016) Configuration Language SPEC define English Lens Settings Focus Command Zoom Command Lens Shift Command Lens Shift Memory Apply Position 1 to 5 1 Save Current Position Off On Lock All Lens Motors Allow Allow Locked Lens Calibration Command Ceiling Mount Off Auto On Auto Rear Projection Off Off On Menu Preferences Menu Horz Offset 0 to 100 0 Menu Vert Offset 0 to 100 0 Show Messages Off On On Menu Transparency 0 to 90 0 Splash Screen Setup Fact ory L ogo Fact ory L ogo Blue Black White PIN Protect Command Change PIN Command Level 1Level 2Level 3 (Or List)Level 4 (Or List)Level 5 (Or List)Level 6 (Or List)Default
Specifications HS Series User Manual88 020-000883-01 Rev. 1 (04-2016) Configuration Power Management Standby Mode 0.5W Mode Communication Mode Communication Mode AC Power On Off Off On Auto Shutdown Never Never 5 Mins 10 Mins 15 Mins 20 Mins 25 Mins 30 Mins Sleep Timer Off Off 2 Hrs 4 Hrs 6 Hrs Cool Down Instant Off Instant Off 1 Min 2 Min High Altitude Off Off On IR Control Top Off On On Front Off On On HDBaseT Off On On 12V Trigger Off Off On Communications LAN DHCP By set IP Address Subnet Mask Default Gateway MAC Address Level 1Level 2Level 3 (Or List)Level 4 (Or List)Level 5 (Or List)Level 6 (Or List)Default
Specifications HS Series User Manual89 020-000883-01 Rev. 1 (04-2016) Configuration Communications WLAN EnableBy set Start IP End IP Subnet Mask Default Gateway MAC Address SSID Network Projector Name By set Show Network Messages Restart Network By set Network Fact ory Res et Serial Port Baud Rate 2400 115200 4800 9600 14400 19200 38400 57600 115200 1200 Serial Port Echo Off Off On Serial Port Path RS232 RS232 HDBaseT Projector Address 0 to 9 0 Level 1Level 2Level 3 (Or List)Level 4 (Or List)Level 5 (Or List)Level 6 (Or List)Default
Specifications HS Series User Manual90 020-000883-01 Rev. 1 (04-2016) Configuration Backlight Preferences Keypad Backlight Timeout 5 Secs Timeout 5 Secs Timeout 10 Secs Timeout 20 Secs Timeout 30 Secs Always On Always Off Status LED Always On Always On Always Off War ni ngs / Errors Only Color Matching Manual Adjustment Enable On Off Off Auto Test Pattern On On Off Red Part of Red 0 to 1000 1000 Green Part of Red 0 to 1000 0 Blue Part of Red 0 to 1000 0 Green Part of Green 0 to 1000 1000 Red Part of Green 0 to 1000 0 Blue Part of Green 0 to 1000 0 Blue Part of Blue 0 to 1000 1000 Red Part of Blue 0 to 1000 0 Green Part of Blue 0 to 1000 0 Red Part of White 0 to 1000 1000 Green Part of White 0 to 1000 1000 Blue Part of White 0 to 1000 1000 Level 1Level 2Level 3 (Or List)Level 4 (Or List)Level 5 (Or List)Level 6 (Or List)Default