Christie Digital Systems Lx900, Lw600 User Manual

37

Exit the PC Adjust Menu. To store the adjusted data, select Store and then press the 
SELECT button. Move the red arrow pointer to one of the Mode 
1 to 10 in which you want to store, and then press the SELECT 
button. To reset the adjusted data, select Reset and press the SELECT 
button. A confirmation box appears and then select [Yes]. All 
adjustments will return to their previous figures.To store the adjusted data  .To clear the adjusted data  . To clear the adjusted data, select Mode free and...

38

Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the Image Select Menu icon.
1
2
Use the Point ed buttons to move the red frame pointer 
to the desired image level and then press the SELECT 
button.IMAGE SELECT MENU
Normal picture level preset on the projector. Standard
Picture level with improved halftone for graphics. Real
User preset picture adjustment in the Image Adjust Menu. 
(p. 47) IMAGE 1–10

Image Level Selection
Menu...

39

✔Note:
• True, Full screen, and Digital zoom +/– cannot 
be selected when no signal is detected in the 
PC System Menu. (p.34)
•
 The  projector  cannot  display  and  resolution higher  than  1600  x  1200.  If  your  computer’s 
screen  resolution  is  higher  than  1600  x  1200, 
lower  the  resolution  before  connecting  the 
projector.
•
 The image data other than XGA (1024 x 768) is modified to fit the screen size in initial mode.
•
 The panning function may not operate properly if the...

40

Select Digital zoom +. The On-Screen Menu disappears and 
“D. zoom +” appears. Press the SELECT button to expand the 
image size. Use the Point ed7 8 buttons to pan the image. 
The Panning function can work only when the image is larger 
than the screen size.
You can also enter the Digital zoom + mode by pressing the 
D.ZOOM button on the remote control.Digital zoom +
Select Digital zoom –. The On-Screen Menu disappears and 
“D.zoom –” appears. Press the SELECT button to compress the 
image size....

41

Computer Input

AV Sy STEM MENU (VIDEO OR S-VIDEO)
AV S y STEM MENU (COMPONENT VIDEO)
Video System Selection
Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the AV System Menu icon.
Use the Point ed buttons to move the red arrow pointer 
to the desired system and then press the SELECT button.1
2
If the projector cannot reproduce proper video image, select 
a specific broadcast signal format from among PAL, SECAM, 
NTSC, NTSC 4.43,...

42

Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the Image Select Menu icon.1
2
Use the Point ed buttons to move the red frame pointer 
to the desired image level and then press the SELECT 
button.

IMAGE SELECT MENU

Image Level Selection
Move the red frame pointer to the desired 
level and press the SELECT button.Image Select Menu icon

Normal picture level preset on the projector.
Standard
Picture level adjusted with fine tone....

43

Screen Size Adjustment
Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the Screen Menu icon.
Use the Point ed buttons to move the red frame pointer 
to the desired function and then press the SELECT 
button.1
2
✔Note:
 •  Wide cannot be operated when “720p,” 
“1035i,” or “1080i” is selected on AV System 
Menu (p.41).
SCREEN MENU
Provide the image at the wide screen ratio of 16:9. Wide
Provide the image at the normal video aspect ratio...

44

Keystone
This function is used to store or reset the keystone correction 
when the Main On/Off Switch is pressed to Off or the AC 
power cord is unplugged. Use the Point 7 8 buttons to switch 
between each option. 
 
Store ...   Keep the keystone correction even when the Main 
On/Off Switch is pressed to Off or the AC power 
cord is unplugged.
 
Reset  . .   Release the keystone correction when the Main On/
Off Switch is pressed to Off or the AC power cord is 
unplugged.
To correct keystone...

45

Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the Image Adjust Menu icon.1
2
Use the Point ed buttons to move the red frame pointer 
to the desired item and then press the SELECT button 
to display the adjustment dialog box. Use the Point 7 8 
buttons to adjust the setting value.IMAGE AD
j UST MENU
Press the Point 7 button to decrease contrast; press the Point 
8 button to increase the contrast (from 0 to 63).
Press the Point 7...

46

Auto picture control
Use the Point 7 8 buttons to select the desired Auto picture 
control position (Off, L1 or L2).
 
Off
 ....   Auto picture control OFF position.
 
L1
.....   Auto picture control LEVEL 1 position.
 
L2
.....   Auto picture control LEVEL 2 position.
Clear the check mark if you do not want to apply the 
adjusted color data; select the check mark and then press 
the SELECT button. The check mark disappears. Return to the COLOR MANAGEMENT POINTER. (If you 
press the MENU button on...