Christie Digital Systems Lx900, Lw600 User Manual

47

Use the Point 7 8 buttons to adjust the gamma value to obtain a 
better balance of contrast (from 0 to 15).Gamma
Press the Point 7 button to decrease the sharpness of the image; 
press the Point 8 button to increase the sharpness of the image 
(from 0 to 31).
Sharpness
An interlaced video signal can be displayed in progressive mode. 
Press the Point 7 8 buttons to change the progressive scan mode. 
  Off  ....   Progressive scan mode is “Off.”
  On  ....   Progressive scan mode is “On.”
  Film  ......

48

Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the Setting Menu icon.1
2
Language
The language used in the On-Screen Menu is available in 
English, German, French, Italian, Spanish, Portuguese, Dutch, 
Swedish, Russian, Chinese, Korean, or Japanese. Use the Point ed buttons to move the red frame pointer 
to the desired item and then press the 
SELECT button. 
The Setting dialog box appears.

Press the SELECT button at 
Language, then...

49

This function allows you to customize the screen logo with Logo 
select, Capture, and Logo PIN code lock functions.

Logo
✔Note:
• Before capturing an image, select  “Standard” in the Image 
Select Menu to capture a proper image. (pp. 38, 42)
•
 A signal from a computer can be captured up to XGA (1024 x 768).
•Certain signals may not be captured properly.
•
 When capturing the image that has been adjusted by the Keystone function, the adjusted data is automatically reset 
and the projector captures...

50

Change the Logo PIN code lock setting

After a correct Logo PIN code is 
entered, the following dialog box 
appears.
Use the Point 7 8 buttons to switch On/Off,
This function prevents an unauthorized person from changing 
the screen logo.
  Off  ....   The screen logo can be changed freely from the 
Logo Menu.
 
On  ....   The screen logo cannot be changed without a 
Logo PIN code.
If you want to change the Logo PIN code lock setting, press 
the SELECT button and the Logo PIN code dialog box...

51

Lamp control

Choose the running speed of cooling fans from the following 
options.
 Normal   .......   Normal speed.
 
Max   ...........   Faster than the normal speed.
Fan control
This function allows you to change the brightness of the screen.

Auto
 .....   Brightness according to the input signal. 
Normal  ...   Normal brightness. 
Eco 
......    Lower brightness.  Lower brightness reduces 
the lamp power consumption and extends the 
lamp life.

Setting
This Projector is equipped with 2...

52

Power management

Time left before the lamp is off

Press the SELECT button at Power 
management and the dialog box 
appears.  Use the Point 7 8 
buttons to choose one of the three 
options.
Press the Point d button to select 
the timer, and then use the Point 7 
8 buttons to set the timer
For reducing power consumption as well as maintaining 
the lamp life, the Power management function turns off the 
projection lamp when the projector is not used for a certain 
period.
If the input signal is...

53

Security

Key lockKey lock

Security

Select Key lock and 
this box appears. 
Choose one of the 
alternatives with the 
Point ed buttons 
and select [Yes] to 
activate it.

This function locks the side control and remote control buttons 
to prevent operation by unauthorized persons......  Unlocked.
.....  Lock the side control buttons.
  To unlock, use the remote control.
.....  Lock the remote control buttons.  To unlock, use the side control.
If the side control accidentally becomes locked and you...

54

Change the PIN  Code 
Change the PIN code
CAUTION
:
WHEN
 y
OU
 
HAVE
 
CHANGED
 THE PI
N
 
CODE
, 
WRITE
 
DOWN
 A 
NEW
 
PIN
 
CODE
 
IN
 
COLUMN
 
OF
 
THE
 
PIN
 
CODE
 
NO .
 
MEMO
 
ON
 
PAGE
 80, 
AND
 
KEEP
 
IT
 
SECUREL
y
 .
 I
F
 
y
OU
 
FORGET
 y
OUR
 
PIN
 
CODE
, 
THE
 
PRO
j
ECTOR
 
CAN
 
NO
 
LONGER
 
BE
 
STARTED .
The PIN code can be changed to your desired four-digit 
number. Press the Point d buttons to select “PIN code 
change” and press the SELECT button. The New PIN
 
code...

55

Setting
Shutter
Shutter function is available to block out light to the 
screen, so that the screen can be used for the other 
presenters.Prohibits the shutter operation from the remote control 
and the projector's side control.
Remote control      Selecting "On" prohibits the shutter 
operation from the remote control.  
Projector 
 ...       Selecting "On" prohibits the shutter 
operation from the side control.
It is possible to prohibit the shutter operation from both of 
the...

56

Factory default
This function returns all setting values except for the user logo, 
PIN code lock, Logo PIN code lock, lamp counter, filter counter 
and filter timer to the factory default settings. Factory default

Quit
Exit the Setting Menu.
Select Factory default and this box 
appears. Select [Yes], and the next 
box appears. 

Test pattern
Various test pattern are available for use when setting up the 
projector.

Set the red frame pointer 
to the item and press the 
SELECT button.
Setting...