Christie Digital Systems Lx900, Lw600 User Manual

27

Operating with Projector Control
Display “Lens shift” on the screen. Use the Point ed7 8 
buttons to position the screen to the desired point without 
having picture distortion. 
The screen can be moved up or down to 50 percent, or 
sideways up to 10 percent from the central axis of the lens 
shift.
Lens Shift Adjustment
✔Note:
 
•  The  arrow  disappears  at  the  maximum  lens  shift  in  each 
direction.
 
•  The  arrow  turns  red  when  the  lens  shift  comes  to  the 
center position of the...

28

Basic Operation
Information
Information display can be used to confirm the current 
operating condition of the projector and the signal being 
projected through the projector.
Press the INFORMATION button to display the 
information window on the screen. To hide the 
information window, press the INFORMATION button 
again or Point 
7 8 buttons.
The information window can also be selected from the 
menu.

Information  Menu
Information Menu
*   The H- and V-sync freq. values described in this figure...

29

Operating with Remote Control
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons 
enables you to make the desired operation quickly without calling up the On-Screen Menu.
Press the FREEZE button on the remote control to freeze 
the picture on the screen. To cancel the FREEZE function, 
press the FREEZE button again or press any other button.

FREEZE button
Press the AUTO PC button on the remote control to 
operate the Auto PC Adj. function....

30

KEy STONE button

Reduce  the  upper  width  with 
Point e button.  Re d u c e   t h e   l owe r   w i d t h 
with Point d button.  
Reduce  the  left  part  with 
Point 7 button.  
Reduce  the  right  part  with 
Point 8 button.  

•
  The white arrows indicate that there is no correction.
•   A red arrow indicates the direction of correction.
•
  An arrow disappears at the maximum correction.
•
  If you press the KEYSTONE button on the remote 
control again while the Keystone dialog box is being...

31

Remote Control

INPUT buttons
Input 
Press the INPUT 1, INPUT 2, INPUT 3 or INPUT 4 button 
on the remote control.  It switches to INPUT 1, INPUT 2, 
INPUT 3 or INPUT 4 as you press the INPUT button.
Before using the INPUT button on the remote control, you 
must select a correct input source by On-Screen Menu 
and the latest input source will be displayed.
Remote Control Operation

Side Control
INPUT button
Press the INPUT button on the side control. It switches to 
INPUT 1, INPUT 2, INPUT 3 and...

32

Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the INPUT Menu icon.
Use the Point ed buttons to move the red arrow pointer 
to the desired input and then press the SELECT button.  
Then you can switch to the desired input. 1
2
Use the Point ed buttons to select the desired source 
and then press the SELECT button.
3
RGB (PC analog)

Menu Operation
Input Selection

Input 1

INPUT MENU
Move the pointer (red 
arrow) to the desired...

33

When the video input signal is connected to the S-VIDEO 
jack, select S-Video.
When the video input signal is connected to the Y-Pb/Cb-
Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
When the video input signal is connected to the VIDEO 
jack, select Video.
When connecting to video equipment, select the type of 
Video source in the Source Select Menu. 
Video

y , Pb/Cb, Pr/Cr

S-Video

Menu Operation

Input Menu icon
Move the pointer (red arrow) to Input 
2 and press the SELECT button.

Input 2

Move the...

34

Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, 
WXGA, or UXGA (refer to “Compatible Computer Specifications” on pages 75-76). If a computer is selected as a 
signal source, this projector automatically detects the signal format and tunes to project a proper image without 
any additional settings. (Some computers need to be set manually.) 
One of the following messages may appear when:
The projector cannot recognize the...

35

Auto PC Adjustment
Auto  PC  Adjustment  function  is  provided  to  automatically  adjust  Fine  sync, Total  dots,  Horizontal  and  Vertical  
positions to conform to your computer. 
Press  the  MENU  button  to  display  the  On-Screen  Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the PC Adjust Menu icon.1
2
Use the Point  ed buttons to move the red frame pointer 
to  the  AUTO  PC  adj.  icon  and  then  press  the  SELECT 
button twice. PC AD
j UST MENU
Auto PC adj  .
To...

36

Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. 
Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal 
formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It 
allows you to recall the setting for a specific computer. 
✔Note:    The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is...