Christie Digital Systems Lx900, Lw600 User Manual

							
37

Exit the PC Adjust Menu. To store the adjusted data, select Store and then press the 
SELECT button. Move the red arrow pointer to one of the Mode 
1 to 10 in which you want to store, and then press the SELECT 
button. To reset the adjusted data, select Reset and press the SELECT 
button. A confirmation box appears and then select [Yes]. All 
adjustments will return to their previous figures.To store the adjusted data  .To clear the adjusted data  . To clear the adjusted data, select Mode free and then press the 
SELECT button. Move the red arrow pointer to the Mode that 
you want to clear and then press the SELECT button.
Reset
Mode free
Store
Quit

This Mode has stored parameters.

Vacant

Values of “Total dots,” “Position 
H,” “Position V,” “Display area 
H,” and “Display area V.”
Close this dialog box.

Close this dialog box.

Confirmation box appears 
and then select [Yes].

Confirmation box appears 
and then select [Yes].
Computer Input
LIT MAN USR LX900 and LW600
020-000053-02 Rev. 1 \(06/08\)  
						

							
38

Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the Image Select Menu icon.
1
2
Use the Point ed buttons to move the red frame pointer 
to the desired image level and then press the SELECT 
button.IMAGE SELECT MENU
Normal picture level preset on the projector. Standard
Picture level with improved halftone for graphics. Real
User preset picture adjustment in the Image Adjust Menu. 
(p. 47) IMAGE 1–10

Image Level Selection
Menu Operation
Image Select Menu icon

Move the red frame pointer to the desired 
level and press the SELECT button.

Computer Input
Press the IMAGE SEL. button on the remote control to 
select the desired image level.
Direct Operation

Remote Control
IMAGE SEL
 .  
button
Standard

Real

Image1

Image 10

•
•
•
LIT MAN USR LX900 and LW600020-000053-02 Rev. 1 \(06/08\)  
						

							
39

✔Note:
• True, Full screen, and Digital zoom +/– cannot 
be selected when no signal is detected in the 
PC System Menu. (p.34)
•
 The  projector  cannot  display  and  resolution higher  than  1600  x  1200.  If  your  computer’s 
screen  resolution  is  higher  than  1600  x  1200, 
lower  the  resolution  before  connecting  the 
projector.
•
 The image data other than XGA (1024 x 768) is modified to fit the screen size in initial mode.
•
 The panning function may not operate properly if the stored Mode in the PC Adjust Menu is 
used. (p. 37)

Screen Size Adjustment
Select the desired screen size that conforms to the input signal source.
Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the Screen Menu icon.1
Use the Point ed buttons to move the red frame pointer 
to the desired function and then press the SELECT 
button.2
Normal SCREEN MENU
Provide the image at the normal computer aspect ratio of 4:3.
Wide True
Provide the image in its original size. When the original image 
size is larger than the screen size (1024 x 768), the projector 
enters to the panning mode automatically. Use the Point ed7 
8 buttons to pan the image. When adjusted, the arrows will 
turn red. When reached to the correction limits, the arrows will 
disappear.
Provide the image to fit the wide video aspect ratio (16:9) by 
expanding the image width uniformly. This function can be used 
to provide the squeezed video signal at 16:9.
Full screen
Provide the full screen image.
Screen Menu icon

Move the red frame pointer to the desired 
function and press the SELECT button.

  Scale H/V   ..............   Adjust the Horizontal/Vertical screen scale.
 
H&V   ......................   When set to “On,” the aspect ratio is 
fixed. The “Scale V” appears dimmed and 
becomes unavailable. Adjust “Scale H,” 
then the screen scale is automatically 
modified based on the aspect ratio. 
 
Position H/V   ..........   Adjust the Horizontal/Vertical screen 
position.
 
Common   ..............   Save the adjusted scale to all the inputs. 
Press the SELECT button at Common to 
display a confirmation box. To save the 
scale, press the SELECT button at “Yes.” 
When Custom is selected, the saved scale 
is used.
 
Reset   ....................   Reset the all adjusted values. Press 
the SELECT button at Reset to display 
a confirmation box. To reset, press the 
SELECT button at “Yes.”
Custom

✔Note:
•
 When no signal is detected, “Normal” is set 
automatically and the Aspect dialog box disappears.
•
 The adjustable range for Scale H/V and Position H/V 
is limited depending on the input signal.
Press the SELECT button at Common or 
Reset, to display a confirmation box.

Computer Input
Adjust the screen scale and position manually with this 
function.
Press the SELECT button at Custom and the “Custom” is 
displayed on the screen for a few seconds. To display the 
Aspect dialog box, press the SELECT button at Custom again 
and then the Aspect dialog box appears.
LIT MAN USR LX900 and LW600
020-000053-02 Rev. 1 \(06/08\)  
						

							
40

Select Digital zoom +. The On-Screen Menu disappears and 
“D. zoom +” appears. Press the SELECT button to expand the 
image size. Use the Point ed7 8 buttons to pan the image. 
The Panning function can work only when the image is larger 
than the screen size.
You can also enter the Digital zoom + mode by pressing the 
D.ZOOM button on the remote control.Digital zoom +
Select Digital zoom –. The On-Screen Menu disappears and 
“D.zoom –” appears. Press the SELECT button to compress the 
image size. 
You can also enter the Digital zoom – mode by pressing the 
D.ZOOM button on the remote control.
To exit the Digital Zoom +/– mode, press any button except the 
D.ZOOM , SELECT, and Point buttons. Digital zoom –

For zooming in and out the images
Keystone
This function is used to store or reset the keystone correction 
when the Main On/Off Switch is pressed to Off or the AC 
power cord is unplugged.  Use the Point 7 8 buttons to switch 
between each option. 
 
Store ...   Keep the keystone correction even when the Main 
On/Off Switch is pressed to Off or the AC power 
cord is unplugged.
 
Reset  . .   Release the keystone correction when the Main On/
Off Switch is pressed to Off or the AC power cord is 
unplugged.
To correct keystone distortion, press the Select button. The 
Keystone dialog box appears. Use the Point ed7 8 buttons to 
correct keystone distortion. (p.30)

Ceiling 

Rear 
Ceiling
When this function is set to “On,” the picture is top/bottom and 
left/right reversed. This function is used to project the image 
from a ceiling-mounted projector.
Rear
When this function is set to “On,” the picture is left/right 
reversed. This function is used to project the image from the 
rear of the screen.

Reset
This function returns all adjusted values to the factory default 
settings. Press the SELECT button at Reset to display a 
confirmation box. To reset, press the SELECT button at “Yes.”

SCREEN MENU
Move the red frame pointer to the desired 
function and press the SELECT button.

Computer Input
Exit the Screen Size Adjustment Menu. Quit

✔Note:
•
 The panning function may not operate properly 
if the stored Mode in the PC Adjust Menu is 
used. (p. 37)
•
 The minimum compression ratio can be limited depending on the input signal or when the 
Keystone function is working or when the 
custom is selected for the screen size.
•
 Digital zoom +/– cannot be selected when Full screen or True is selected.
LIT MAN USR LX900 and LW600020-000053-02 Rev. 1 \(06/08\)  
						

							
41

Computer Input

AV Sy STEM MENU (VIDEO OR S-VIDEO)
AV S y STEM MENU (COMPONENT VIDEO)
Video System Selection
Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the AV System Menu icon.
Use the Point ed buttons to move the red arrow pointer 
to the desired system and then press the SELECT button.1
2
If the projector cannot reproduce proper video image, select 
a specific broadcast signal format from among PAL, SECAM, 
NTSC, NTSC 4.43, PAL-M, and PAL-N. PAL/SECAM/NTSC/NTSC4  . 43/PAL-M/PAL-N
The projector automatically detects an incoming video signal, 
and adjusts itself to optimize its performance.
When the Video System is 1035i or 1080i, select the system 
manually.
If the projector cannot reproduce proper video image, select a 
specific component video signal format from among 480i, 575i, 
480p, 575p, 720p, 1035i, and 1080i. Auto
COMPONENT VIDEO SIGNAL FORMAT
Video  j ack or S-Video  j ack
y
, Pb/Cb, Pr/Cr  j acks
The projector automatically detects an incoming video system, 
and adjusts itself to optimize its performance. Auto

AV System Menu icon
The selected system is displayedMove the pointer to the desired 
system and press the SELECT button.

AV System Menu icon
The selected system is displayed.Move the pointer to the desired 
system and press the SELECT button.

Video Input
✔Note:
•   The AV System menu cannot be selected when selecting 
RGB(Scart).
LIT MAN USR LX900 and LW600
020-000053-02 Rev. 1 \(06/08\)  
						

							
42

Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the Image Select Menu icon.1
2
Use the Point ed buttons to move the red frame pointer 
to the desired image level and then press the SELECT 
button.

IMAGE SELECT MENU

Image Level Selection
Move the red frame pointer to the desired 
level and press the SELECT button.Image Select Menu icon

Normal picture level preset on the projector.
Standard
Picture level adjusted with fine tone. Cinema
User preset picture adjustment in the Image Adjust Menu. 
(p. 47) IMAGE 1–10
Menu Operation

Video Input
Press the IMAGE SEL. button on the remote control to 
select the desired image level.
Direct Operation
Remote Control
IMAGE SEL
 .  
button

Standard

Cinema

Image1

Image 10

•
•
•
LIT MAN USR LX900 and LW600020-000053-02 Rev. 1 \(06/08\)  
						

							
43

Screen Size Adjustment
Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the Screen Menu icon.
Use the Point ed buttons to move the red frame pointer 
to the desired function and then press the SELECT 
button.1
2
✔Note:
 •  Wide cannot be operated when “720p,” 
“1035i,” or “1080i” is selected on AV System 
Menu (p.41).
SCREEN MENU
Provide the image at the wide screen ratio of 16:9. Wide
Provide the image at the normal video aspect ratio of 4:3.
Normal
Move the red frame pointer to the desired 
function and press the SELECT button. Screen Menu icon

 
Scale H/V   ..............   Adjust the Horizontal/Vertical screen scale.
 
H&V   ......................   When set to “On,” the aspect ratio is 
fixed. The “Scale V” appears dimmed and 
becomes unavailable. Adjust “Scale H,” 
then the screen scale is automatically 
modified based on the aspect ratio. 
 
Position H/V   ..........   Adjust the Horizontal/Vertical screen 
position.
 
Common   ..............   Save the adjusted scale to all the inputs. 
Press the SELECT button at Common to 
display a confirmation box. To save the 
scale, press the SELECT button at “Yes.” 
When Custom is selected, the saved scale 
is used.
 
Reset   ....................   Reset the all adjusted values. Press 
the SELECT button at Reset to display 
a confirmation box. To reset, press the 
SELECT button at “Yes.”
Custom
✔Note:
•
 When no signal is detected, “Normal” is set 
automatically and the Aspect dialog box disappears.
•
 The adjustable range for Scale H/V and Position H/V 
is limited depending on the input signal.
Press the SELECT button at Common or 
Reset, to display a confirmation box.

Video Input
Adjust the screen scale and position manually with this 
function.
Press the SELECT button at Custom and the “Custom” is 
displayed on the screen for a few seconds. To display the 
Aspect dialog box, press the SELECT button at Custom again 
and then the Aspect dialog box appears.
LIT MAN USR LX900 and LW600
020-000053-02 Rev. 1 \(06/08\)  
						

							
44

Keystone
This function is used to store or reset the keystone correction 
when the Main On/Off Switch is pressed to Off or the AC 
power cord is unplugged. Use the Point 7 8 buttons to switch 
between each option. 
 
Store ...   Keep the keystone correction even when the Main 
On/Off Switch is pressed to Off or the AC power 
cord is unplugged.
 
Reset  . .   Release the keystone correction when the Main On/
Off Switch is pressed to Off or the AC power cord is 
unplugged.
To correct keystone distortion, press the Select button. The 
Keystone dialog box appears. Use the Point ed7 8 buttons to 
correct keystone distortion. (p.30)

Ceiling 

Rear 
Ceiling
When this function is set to “On,” the picture is top/bottom and 
left/right reversed. This function is used to project the image 
from a ceiling-mounted projector.
Rear
When this function is set to “On,” the picture is left/right 
reversed. This function is used to project the image from the 
rear of the screen.

Reset
This function returns all adjusted values to the factory default 
settings. Press the SELECT button at Reset to display a 
confirmation box. To reset, press the SELECT button at “Yes.”

SCREEN MENU
Move the red frame pointer to a function and 
press the SELECT button.

Video Input
Exit the Screen Size Adjustment Menu. Quit
LIT MAN USR LX900 and LW600020-000053-02 Rev. 1 \(06/08\)  
						

							
45

Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the Image Adjust Menu icon.1
2
Use the Point ed buttons to move the red frame pointer 
to the desired item and then press the SELECT button 
to display the adjustment dialog box. Use the Point 7 8 
buttons to adjust the setting value.IMAGE AD
j UST MENU
Press the Point 7 button to decrease contrast; press the Point 
8 button to increase the contrast (from 0 to 63).
Press the Point 7 button to decrease the brightness; press the 
Point 8 button to increase the brightness (from 0 to 63). Contrast
Brightness
Press the Point 7 button to decrease the intensity of the color; 
press the Point 8 button to increase the intensity of the color 
(from 0 to 63).
Press the Point 7 8 buttons to adjust the tint value to obtain 
proper color balance (from 0 to 63). Color 
✽
Tint  ✽
Color Management
The Color Management function can be used to adjust the 
LEVEL, PHASE, and GAMMA of the selected display colors 
(except for black, white, and gray) on the screen and replace 
these colors with other colors if required.
You can store up to eight (8) color management data.
1Use the Point ed buttons to move the red frame pointer 
to Color Management, and then press the SELECT 
button. The projected image freezes, and the COLOR 
MANAGEMENT POINTER appears.
Use the Point ed7 8 buttons to move the pointer to the 
spot where you want to adjust the color and then press 
the SELECT button. The COLOR SELECTION window 
appears, and the color in the center of the pointer is 
selected and you can adjust the color.
2
Use the Point ed7 8 buttons to adjust the LEVEL and 
PHASE of the color, and then press the SELECT button 
to confirm the setting. Then use the Point ed buttons to 
adjust the GAMMA for the color and press the SELECT 
button to accept the setting. After adjusting, press the 
SELECT button to go to the COLOR MANAGEMENT LIST.3

COLOR MANAGEMENT 
POINTER
POINTER MODE

Image Adjustment
Move the red frame pointer to the desired 
item and then press SELECT button. Image Adjust Menu icon

Use the Point 7 8 buttons to adjust the 
setting value.

COLOR SELECTION MODE
Go to the COLOR MANAGEMENT LIST. LIST

Picture Image
✔Note:
  ✽ Displayed in grayout in the computer Input.
•
 
Tint cannot be selected when the video system is 
PAL, SECAM, PAL-M, or PAL-N (p.41).
•
 
Color management is displayed in grayout when 
there is no signal .
LIT MAN USR LX900 and LW600
020-000053-02 Rev. 1 \(06/08\)  
						

							
46

Auto picture control
Use the Point 7 8 buttons to select the desired Auto picture 
control position (Off, L1 or L2).
 
Off
 ....   Auto picture control OFF position.
 
L1
.....   Auto picture control LEVEL 1 position.
 
L2
.....   Auto picture control LEVEL 2 position.
Clear the check mark if you do not want to apply the 
adjusted color data; select the check mark and then press 
the SELECT button. The check mark disappears. Return to the COLOR MANAGEMENT POINTER. (If you 
press the MENU button on the side control or the remote 
control, it returns to the COLOR MANAGEMENT POINTER 
and you will need to reselect and readjust the color.)
Return to the IMAGE ADJUST Menu. Any settings that 
have been changed will not be stored. To store the 
changed settings, be sure to select “LIST” and go to the 
COLOR MANAGEMENT LIST.
LIST MODE

Return to the COLOR SELECTION mode so that you can 
readjust the setting for the color in that line. (This option is 
not available if the check mark is cleared.)
Select the DEL box if you want to delete the adjusted 
data. Press the SELECT button and a confirmation box 
appears and then select [Yes] 
Delete all the data in the list. Press the SELECT button and 
a confirmation box appears and then select [Yes].
The same function as stated above.

Level and phase 
adjustment palette.
Gamma 
adjustment palette.

Color temp
 .
Use the Point 7 8 buttons to select the desired Color temp. 
level (High, Mid, Low, or XLow).  COLOR M
 .

MENU

COLOR PALETTE

DEL

ALL DEL

COLOR M
 .

LIST
COLOR M .
MENU

COLOR PALETTE

DEL

ALL DEL
MENU
COLOR M .

COLOR SELECTION MODE
LIST MODE
COLOR SELECTION MODE (continued)
In the COLOR MANAGEMENT LIST, the adjusted color 
data are checkmarked. You can decide whether or not to 
apply the adjusted color data in the list to the projected 
image (see below).4
MENU

The same function as stated above.
Picture Image
LIT MAN USR LX900 and LW600020-000053-02 Rev. 1 \(06/08\)