Christie Digital Systems Lx501, Lx601i Users Manual

39LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
Operating
Using the menu function (continued)
3.To close the MENU, press the MENU button again or select EXIT and press 
the ◄ cursor button or ENTER button. Even if you do not do anything, the 
dialog will automatically disappear after about 30 seconds.
Indication in OSD (On Screen Display)
The meanings of the general words on the OSD are as follows.
Indication Meaning
EXITSelecting this word finishes the OSD menu. It's the...

40LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
Operating
Using the menu function (continued)
Containing items of  each menu
The items contained in the menus are as below;
Menu Items
EASY MENU (
41)ASPECT, AUTO  KEYSTONE, 
 KEYSTONE,  KEYSTONE, 
PERFECT FIT, PICTURE MODE, ECO MODE, INSTALLATION, 
RESET, FILTER TIME, LANGUAGE, ADVANCED MENU, EXIT
PICTURE (
43)BRIGHTNESS, CONTRAST, GAMMA, COLOR TEMP, COLOR, 
TINT, SHARPNESS, ACTIVE IRIS, MY MEMORY
IMAGE (
46)ASPECT, OVER SCAN,...

41LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons. Then 
perform it according to the following table.
Item Description
ASPECTUsing the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE menu (
46).
AUTO KEYSTONE Using the ► button executes the auto keystone function.See the AUTO KEYSTONE item in SETUP menu (53)....

42LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
EASY MENU
Item Description
PICTURE MODE 
(continued)
GAMMA COLOR TEMP
NORMAL 1 DEFAULT 2 MID
CINEMA 2 DEFAULT 3 LOW
DYNAMIC 3 DEFAULT 1 HIGH
BOARD(BLACK) 4 DEFAULT 4 Hi-BRIGHT-1
BOARD(GREEN) 4 DEFAULT 5 Hi-BRIGHT-2
WHITEBOARD 5 DEFAULT 2 MID
DAYTIME 6 DEFAULT 6 Hi-BRIGHT-3
DICOM SIM. 7 DEFAULT 2 MID
• When the combination of GAMMA and COLOR TEMP differs 
from pre-assigned modes above, the display on the menu for the 
PICTURE MODE...

43LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
PICTURE menu
PICTURE menu
From the PICTURE menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
Item Description
BRIGHTNESSUsing the 
◄/► buttons adjusts the brightness.
Dark 
 Light
CONTRASTUsing the 
◄/► buttons adjusts the contrast.
Weak 
 Strong
GAMMAUsing the...

44LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
PICTURE menu
Item Description
COLOR TEMPUsing the ▲/▼ buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name includes 
CUSTOM and then pressing the ► button 
or the ENTER button displays a dialog 
to aid you in adjusting the OFFSET and 
GAIN of the selected mode.
OFFSET adjustments change the color intensity on the whole tones 
of the test pattern. GAIN adjustments mainly affect color intensity on...

45LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
PICTURE menu
Item Description
SHARPNESSUsing the ◄/► buttons adjusts the sharpness.
Weak 
 Strong
• There may be some noise and/or the screen may flicker for a 
moment when an adjustment is made. This is not a malfunction.
ACTIVE IRIS
Using the ▲/▼ cursor buttons changes the active iris control mode.
PRESENTATION  
  THEATER  
  OFF              
PRESENTATION :  The active iris displays the best presentation 
image for both...

46LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
IMAGE menu
IMAGE menu
From the IMAGE menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table. for selected port   
Item Description
ASPECTUsing the ▲/▼ buttons switches the mode for aspect ratio. 
For a computer signal
 NORMAL 
 4:3 
 16:9 
 16:10  
       
For an...

47LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
IMAGE menu
Item Description
OVER SCANUsing the ◄/► buttons adjusts the over-scan ratio.
Small (It magnifies picture) 
 Large (It reduces picture)
• This item can be selected only for a video, s-video and component 
video signal.
• For an HDMI
TM signal, this item can also be selected if either (1) or 
(2) applies. 
(1)  HDMI FORMAT item in the INPUT menu for selected port is set 
to VIDEO.
(2)  
HDMI FORMAT item in the INPUT menu...

48LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
IMAGE menu
Item Description
H PHASE
Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker.
Right 
 Left
• This item can be selected only for a computer signal or a 
component video signal. This function is unavailable for a signal 
from the LAN, USB TYPE A / B or HDMI 1 / 2 port.
H SIZEUsing the ◄/► buttons adjusts the horizontal size.
Small 
 Large
• This item can be selected only for a computer signal. This...