Christie Digital Systems Lx501, Lx601i Users Manual

9LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
Setting up
Arrangement (continued)
►Place the projector in a cool place with sufficient 
ventilation. The projector may shutdown automatically or may malfunction if its 
internal temperature is too high.
Using a damaged projector could result in a fire and an electric shock.
•  Do not place the projector in direct sunlight or near hot objects such as heaters. 
• Do not place the projector where the air from an air conditioner or...

10LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
Setting up
Connecting with your devices
Before connecting the projector to a device, consult the manual of the device to 
confirm that the device is suitable for connecting with this projector and prepare 
the required accessories, such as a cable in accord with the signal of the device. 
Consult your dealer when the required accessory did not come with the product or 
the accessory is damaged.
After making sure that the projector...

11LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
Setting up
Connecting with your devices (continued)
• Before connecting the projector to a computer, consult the computer’s 
manual and check the compatibility of the signal level, the synchronization 
methods and the display resolution output to the projector. 
- 
 Some signal may need an adapter to input this projector.
- 
 Some computers have multiple screen display modes that may include some 
signals which are not supported by...

12LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
Setting up
Connecting with your devices (continued)
(continued on next page)
• If an oversized USB storage device blocks the LAN port, use only 
the further USB TYPE A port from the LAN port or a USB extension cable to 
connect the USB storage device.NOTE
► Before connecting the projector to a network system be sure to 
obtain the consent of the administrator of the network.
►
Do not connect the LAN port to any network that might...

13LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
Setting up
• The HDMI ports of this model are compatible with HDCP (High-band-
width Digital Content Protection) and therefore capable of displaying video 
signals from HDCP compatible DVD players or the like.
-  The HDMI ports support the following signals:
Video signal :  480i@60, 480p@60, 576i@50, 576p@50, 720p@50/60, 
1080i@50/60, 1080p@50/60
Audio signal :  Format Linear PCM 
Sampling frequency 48kHz / 44.1kHz / 32kHz
 
-...

14LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
Setting up
Connecting with your devices (continued)
• To use a wired remote control, connect a wired remote control to the 
REMOTE CONROL IN port. You can also connect another projector to the 
REMOTE CONROL OUT port to control it from the wired remote control. You 
can utilize this projector as a remote control-relay with the REMOTE CONROL 
IN and OUT ports. To connect the wired remote control or another projector 
to the REMOTE...

15LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
Use the supplied adapter cover to prevent 
the USB wireless adapter from coming 
off easily. When using the adapter cover, 
connect the USB wireless adapter to the 
further USB TYPE A port from the LAN 
port.
1. Loosen the screw marked with a triangle.
2. Insert the tab of the cover into the hole 
at the upper right of the USB TYPE A 
ports in the direction of the arrow.
3. Align the screw holes on the projector and the cover. Then...

16LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
Setting up
Using the security bar and slot
A commercially available anti-theft chain or 
wire can be attached to the security bar on 
the projector. Refer to the fi gure to choose 
an anti-theft chain or wire.
Also this product has the security slot for 
the Kensington lock. 
For details, see the manual of the security 
tool.
►Do not use the security bars and slot to prevent the projector 
from falling down, since it is not designed...

17LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
Connecting to a power supply
1.Put the connector of the power cord into the 
AC IN (AC inlet) of the projector.
2.Firmly plug the power cord’s plug into the 
outlet. In a couple of seconds after the power 
supply connection, the POWER indicator will 
light up in steady orange.
►Do not connect the projector to a power supply while no lens 
unit is attached to it.
►Please use extra caution when connecting the power cord, as incorrect...

18LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
Remote control
Installing the batteries
Please insert the batteries into the remote control before using it. If the remote 
control starts to malfunction, try to replace the batteries. If you will not use the 
remote control for long period, remove the batteries from the remote control and 
store them in a safe place.
1.Holding the hook part of the battery 
cover, remove it.
2.Align and insert the two AA batteries 
(HITACHI MAXELL...