Christie Digital Systems Lx501, Lx601i Users Manual

69LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
OPTION menu
Item Description
SERVICE
(continued)FILTER MESSAGE
Use the ▲/▼ button to set the timer for notifying by the message 
when to replace the filter unit 
1000h 
 2000h 
 5000h 
 10000h 
 15000h 
 20000h 
 OFF
After choosing an item except OFF, the message “REMINDER *** 
HRS PASSED ....” will appear after the timer reaches the interval 
time set by this feature (
11 3). 
When the OFF is chosen, the message will not...

70LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
OPTION menu
Item Description
SERVICE
(continued)KEY LOCK
(1)  Use the ▲/▼ buttons to choose the operations control.
CONTROL PANEL 
 REMOTE CONTROL
(2)  Use the ◄/► buttons to select ON or 
OFF.
ON 
 OFF
Selecting ON in Step 2 locks the buttons except STANDBY, ON 
and STANDBY/ON on the operations control selected in Step 1. 
Selecting OFF releases the locked buttons on the operations control 
selected in Step 1.
• Please use this...

71LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
Selecting this item displays COMMUNICATION 
menu. 
In this menu, you can configure the serial 
communication settings of the projector using the 
CONTROL port.
• Select an item using the cursor buttons ▲/▼. 
Then pressing the ► button opens the submenu 
for the setting item you selected. Or, pressing 
the ◄ button instead of the ► button makes the 
menu back to the...

72LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
(continued)
SERIAL SETTINGS
Select the serial communication condition for the 
CONTROL port.
BAUD RATE
4800bps 
 9600bps 
 19200bps 
 38400bps
      
 PARITY
NONE 
 ODD 
 EVEN
    
• The BAUD RATE is fixed to 19200bps and PARITY 
is fixed NONE when the COMMUNICATION TYPE 
is set to OFF
 (71)
.
TRANSMISSION METHOD
Select the transmission method for communication by...

73LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
(continued)
RESPONSE LIMIT TIME
Select the time period to wait for receiving 
response data from other device communicating by 
the NETWORK BRIDGE and the HALF-DUPLEX 
through the CONTROL port.
OFF 
 1s 
 2s 
 3s
    
OFF: Select this mode if it is not required to check 
the responses from the device that the projector 
sends data to. In this mode, the projector can...

74LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
OPTION menu
Item Description
SERVICE
(continued)INFORMATION
Selecting this item displays a dialog titled “INPUT_INFORMATION”. 
It shows the information about the current input.
• The “FRAME LOCK” message on the dialog means the frame lock 
function is working. 
• The “SCART RGB” message means the COMPONENT ports 
are working as a SCART RGB input port. Please refer to the 
COMPONENT item in INPUT menu (
49).
• This item can't...

75LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
NETWORK menu
Remember that incorrect network settings on this 
projector may cause trouble on the network. Be sure 
to consult with your network administrator before 
connecting to an existing access point on your network.
Select “NETWORK” from the main menu to access the 
following functions. 
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor button on the projector or 
remote...

76LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
NETWORK menu
Item Description
WIRELESS 
SETUP
(continued)DHCP  
(Dynamic Host 
Configuration 
Protocol)Use the ▲/▼ buttons to turn DHCP on/off.
ON 
 OFF
Select OFF when the network does not have DHCP 
enabled. To save the setting, press the ► button.
• When the “DHCP” setting changes to “ON”, it 
takes a little time to obtain IP address from DHCP 
server.
• Auto IP function will be assigned an IP address if 
the projector could not...

77LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
NETWORK menu
Item Description
WIRELESS 
SETUP
(continued)DATE AND 
TIMEUse the ▲/▼/◄/► buttons to enter the Year (last 
two digits), Month, Date, Hour and Minute.
• When this item is set, the same item in the 
WIRED SETUP menu is overwritten with the same 
setting (
81). 
• The projector will override this setting and retrieve 
DATE AND TIME information from the Time server 
when SNTP is enabled. (
3.1.8 Date/Time 
Settings in...

78LX501/LX601i User Manual-Operating Guide 020-000461-01 Rev. 1 (03-2012)
NETWORK menu
Item Description
WIRELESS 
SETUP
(continued)SSIDUse the ▲/▼ 
buttons to select the 
SSID to display the 
SSID menu.
#1 DEFAULT 
 #2 DEFAULT 
 #3 DEFAULT
      
 #5 CUSTOM 
 #4 DEFAULT 
Select one of the DEFAULT (#1~#4) and press ► 
or ENTER button.
To adjust CUSTOM
Press the ► or ENTER button when the # 5 
CUSTOM is selected. The SSID #5 CUSTOM 
menu will be appeared.
(1)  
The current SSID will be displayed on the...