Christie Digital Systems Lwu505 User Manual

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
3Note:


LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Video Input
This function returns all adjusted values to the factory 
default settings. Press the SELECT button at Reset to 
display a confirmation box. To reset, press the SELECT 
button at Ye s.
Ceiling
Rear
When this function is set to On, the picture will be top/
bottom and left/right reversed. This function is used to 
project the image from a ceiling-mounted projector.
When this function is set to On, the picture will be left/right 
reversed. This...

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Setting
Setting Menu
Press the MENU button to display the On-Screen 
0HQX3UHVVWKH3RLQW
x
zEXWWRQVWRVHOHFW
SettingDQGSUHVVWKH3RLQW
yRUWKH6(/(&7
button to access the submenu items.1
28VHWKH3RLQW
x
zEXWWRQVWRVHOHFWWKHGHVLUHG
LWHPDQGWKHQSUHVVWKH3RLQW
yRUWKH6(/(&7
button to access the selected item.
This projector has a Setting menu that allows you to 
set up the other various functions described below....

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
This function decides whether to display On-Screen 
Displays.
On......................... Show all the On-Screen displays. Use 
this function when you want to project 
images after the lamp becomes bright 
enough. The factory default setting is 
in this option.
Countdown Off.... Show the input image instead of 
the countdown when turning on the 
projector. Use this function when you 
want to project the image as early as 
possible even when the lamp is not...

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Setting
Capture
Capture
This function enables you to capture an image being 
projected to use it for a starting-up display or interval of 
presentations.
Select Capture and press the SELECT button. 
A confirmation box appears and select Ye s to capture the 
projected image.
After capturing the projected image, go to the Logo select 
function and set it to User. Then the captured image will be 
displayed the next time you turn on the projector.
To cancel...

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Setting
Enter a Logo PIN code
After a correct Logo PIN 
code is entered, the following 
dialog box appears.
Change the Logo PIN code lock setting
Change the Logo PIN code
Enter a Logo PIN code
When using side controlUse th
QXPEHU3UHVVWKH3RLQW
yEXWWRQWRIL[WKHQXPEHUDQG
move the red frame pointer to the next box. The number 
changes to ½. If you fix an incorrect number, use the Point 

correct, and then enter the correct number.
Repeat this step...

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Setting
Picture in Picture
Picture in Picture
Show the selected mode (Off/User 1-5) and its status 
(Stored /Free/Adj.).User 1 and User 2 have stored 
default values. See page 30 for details.
  User setting
P in P: Provide the images of Main picture and Sub 
picture at the ratio of Screen aspect in the Screen 
Menu.
P by P:Provide the images of Main picture and Sub 
picture at the ratio of 4:3.   P in P/P by P
Selected
Mode
Status (Stored /
Free/Adj.) of...

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
HDMI setup
Set the Frame Lock to Main picture or Sub picture.Frame lock
Press the SELECT button at Reset to display a 
confirmation box. To reset, press the SELECT button at 
Ye s. Reset
Setting
To store the adjusted data.
Stored data
Vacant
Return to Picture in Picture menu.
This function is only used for HDMI input source.
Image
SelectNormal or Enhanced to match the video range 
setting of your HDMI Digital RGB equipment.
Sound
HDMI: When using the HDMI...

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
This function allows you to change brightness of the 
screen.
Lamp life control
Lamp control
Select the lamp operation when the total lighting time of a 
lamp exceeds the recommended total hours of use.
     Mode 1.......  The lamp can be turned on even after 
exceeding the recommended total hours of 
use.
     Mode 2.......  The lamp can be turned on even after 
exceeding the recommended total 
hours of use. But the projector turns off 
automatically...

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Choose the running speed of cooling fans from the 
following options.
Normal.. Operate in this mode under normal 
conditions.
Max........ Use this mode when you want to increase the 
cooling effect when operating the projector in 
high ambient temperature environment. Fan 
noise is louder than Normal.
Setting
Simple mode buttons
Only these buttons are 
active when the simple 
mode is set to On. [ON, 
STAND-BY, SHUTTER, 
INPUT, MENU, AUTO...