Christie Digital Systems Lwu505 User Manual

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons 
enables you to make the desired operation quickly without calling up the On-Screen Menu.
Press the ZOOM buttons on the remote control to zoom 
in and out the image.
ZOOM buttons
Press the FOCUS buttons on the remote control to adjust 
focus of the image.
FOCUS buttons
See page 27 for details.
LENS SHIFT button
Remote Control
D.ZOOM buttonSHUTTER...

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Press the FREEZE button on the remote control to freeze 
the picture on the screen, meanwhile, volume is muted. 
To cancel the FREEZE function, press the FREEZE 
button again or press any other button.
Fig.1 will appear when the Freeze function is working.
FREEZE button
FILTER button
Press and hold the FILTER button for more than 
5 seconds to operate electrically operated filter to 
replace the filter.
Remote Control
POINTER button
FILTER button
3Note:...

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Remote Control
POINT

x
z
{
ybuttons
KEYSTONE button
Basic Operation
If a projected picture still has keystone distortion after 
pressing the AUTO PC button on the remote control, 
correct the image manually as follows:
Press the KEYSTONE button on the remote control to 
switch the Standard (for Vertical/Horizontal) /Corner 
correction adjustment. The Standard or Corner correction 
adjustment dialog box appears. Use the Point 
x
z
{
y
buttons to correct...

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
3Note:

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
The input source changes each time you press the INPUT button on the side control or the remote 
control as follows:
,QSXW
:,QSXW
:,QSXW
:
Before using the INPUT button on the side control or the remote control, you must select a correct 
input source by On-Screen Menu and the latest input source will be displayed.
Input Selection
Press the INPUT 1, INPUT 2, or INPUT 3 button on the remote control. The input source appears on 
the screen as...

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
INPUT MENU
When your computer is connected to the INPUT 1 
(ANALOG) terminal, select RGB (PC analog).
RGB(PC analog)
3Note:
 ,QSXWVRXUFHFKDQJHVLIWKH,1387EXWWRQRQWKH
UHPRWHFRQWUROLVSUHVVHG
When connecting the computer output [5 BNC Type 
(Green, Blue, Red, Horiz. Sync, and Vert. Sync.)] from the 
computer to G, B, R, H/HV, and V jacks:
Input Selection
When your computer is connected to the INPUT 2 
(5 BNC INPUT JACKS) terminal, select...

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
When the video input signal is connected 
to the Y-Pb/Cb-Pr/Cr jacks, select 
Y,Pb/
Cb,Pr/Cr.
When the video input signal is connected 
to the VIDEO jack, select Video.
When the video input signal is connected 
to the S-VIDEO jack, select S-video. When connecting to video equipment, select the type of 
Video source in the Source Select Menu. 
When the video input signal is connected 
to the Y-Pb/Cb-Pr/Cr jacks, select 
Y,Pb/
Cb,Pr/Cr.
When the video input...

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Computer Input
PC System Menu
PC System Menu
1
2
PC system can also be selected manually.The PC System Menu 
Selected system is    
displayed.
Press the MENU button to display the On-Screen 
0HQX8VHWKH3RLQW
x
zEXWWRQVWRVHOHFWInput
DQGWKHQSUHVVWKH3RLQW
yRUWKH6(/(&7EXWWRQ
8VHWKH3RLQW
x
zEXWWRQVWRVHOHFWSystem and 
WKHQSUHVVWKH3RLQW
yRUWKH6(/(&7EXWWRQ
8VHWKH3RLQW
x
zEXWWRQVWRVHOHFWWKHGHVLUHG
system and then press...

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Position H and 
Position V to conform to your computer. 
To store the adjusted parameters:
The adjusted parameters from the Auto PC Adjustment 
can be stored in the projector. Once the parameters are 
stored, the setting can be done just by selecting Mode in 
PC SYSTEM Menu (p.36). See “Manual PC Adjustment” 
on pages 38-39.
The Auto PC adjustment function can be...

LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Some computers employ special signal formats which may not be tuned by Multi-Scan system of this 
projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those special 
signal formats. The projector has 10 independent memory areas to store those parameters manually 
adjusted. It allows you to recall the setting for a specific computer. 
8VH WKH 3RLQW 
{
y EXWWRQV WR DGMXVW WKH YDOXH
eliminating a flicker from...