Christie Digital Systems Lwu505 User Manual

							LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
3Note:

						

							LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Video Input
This function returns all adjusted values to the factory 
default settings. Press the SELECT button at Reset to 
display a confirmation box. To reset, press the SELECT 
button at Ye s.
Ceiling
Rear
When this function is set to On, the picture will be top/
bottom and left/right reversed. This function is used to 
project the image from a ceiling-mounted projector.
When this function is set to On, the picture will be left/right 
reversed. This function is used to project the image from 
rear of the screen.
Keystone
This function is used to adjust keystone distortion of the 
projected image. Use the Point 
x
z buttons to choose the 
item you want to adjust.
Keystone
Adjust the Horizontal/Vertical keystone distortion of the  
projected image. Standard
Corner correction
Adjust the corner distortion of the projected image.
Corner pattern
Choose a Corner pattern mode among Red,White,
Blue, and Off.
Store
    Store... Keep the keystone correction even when the 
AC power cord is unplugged.
Reset... Release the keystone correction when the 
AC power cord is unplugged.
Press the KEYSTONE button on the remote control
to switch the Standard (for Vertical/Horizontal) /
Corner correction adjustment. The Standard or Corner 
correction adjustment dialog box appears. Use the 
Point
x
z
{
y buttons to correct the Standard or 
Corner distortion.  (p.31) 
Ceiling
Rear
Reset
This function is used to project the image to a 4:3 or 16:9 
projection screen.
Default (16:10) ....16:10 is the aspect of the LCD panel. 
The original Screen Menu is available.
16:9 ..... Set to a 16:9 projection screen.
4:3 .....   Set to a 4:3 projection screen.
Screen aspect
3Note:
:KHQWKHIXQFWLRQLVVHOHFWHG
Wide (16:9)LVQRWDYDLODEOHLQWKH3&
DQG$9VFUHHQSS
:KHQWKHIXQFWLRQLVVHOHFWHG
Natural wideLVQRWDYDLODEOHLQWKH$9
VFUHHQS
50 
						

							LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Setting
Setting Menu
Press the MENU button to display the On-Screen 
0HQX3UHVVWKH3RLQW
x
zEXWWRQVWRVHOHFW
SettingDQGSUHVVWKH3RLQW
yRUWKH6(/(&7
button to access the submenu items.1
28VHWKH3RLQW
x
zEXWWRQVWRVHOHFWWKHGHVLUHG
LWHPDQGWKHQSUHVVWKH3RLQW
yRUWKH6(/(&7
button to access the selected item.
This projector has a Setting menu that allows you to 
set up the other various functions described below.
38VHWKH3RLQW
x
zEXWWRQVWRVHOHFWWKHGHVLUHG
item and then press the SELECT button.
The language used in the On-Screen Menu is available in 
English, German, French, Italian, Spanish, Portuguese, 
Dutch, Swedish, Russian, Chinese, Korean and Japanese.
Language
Position
This function is used to change the position of the On-Screen 
Menu. Select Position and press the SELECT button.
The Position changes each time you press the SELECT 
button as follows.
the centerÆ the bottom leftÆ the bottom rightÆ the top 
leftÆ the top rightÆ the centerÆ.....
This function detects the input signal automatically. When 

buttons to select one of the following options.
Mode 1...... Input search will not work.
Mode 2...... Input search works under the following 
situation:
    – When pressing the INPUT button on the 
side control or the remote control.
Mode 3...... Input search works under the following 
situation:
–When turning on the projector by pressing 
the ON/STAND-BY button on the side 
control or pressing the ON button on the 
remote control.
 –When pressing the INPUT button on the 
remote control or on the side control.
–When no signal is detected.
Setting
Language
Menu
Input button
Menu size
This function is used to change the display size of the On-Screen 
Menu. Select Menu size and press the SELECT button.
Normal«Display the On-Screen Menu on the screen 
in its normal size.
Double
«Display the On-Screen Menu on the screen 
in its double normal size.
3Note:
:KHQ WKH4:3 IXQFWLRQ LV VHOHFWHG LQ
6FUHHQ DVSHFWDouble LV QRW DYDLODEOH
LW ZLOO EH IRUFHG WR UHWXUQ WRNormalLQ
0HQXVL]H
Position
3Note:

						

							LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
This function decides whether to display On-Screen 
Displays.
On......................... Show all the On-Screen displays. Use 
this function when you want to project 
images after the lamp becomes bright 
enough. The factory default setting is 
in this option.
Countdown Off.... Show the input image instead of 
the countdown when turning on the 
projector. Use this function when you 
want to project the image as early as 
possible even when the lamp is not 
bright enough.
Off........................ Hide the On-Screen Displays except:
  
”On-Screen Menu
  
”Power off? (p.24)
  
”No signal for Power management. 
   (p.59)
  
”Please wait ...
  
”White Arrows for panning mode 
(p.42)
 

						

							LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Setting
Capture
Capture
This function enables you to capture an image being 
projected to use it for a starting-up display or interval of 
presentations.
Select Capture and press the SELECT button. 
A confirmation box appears and select Ye s to capture the 
projected image.
After capturing the projected image, go to the Logo select 
function and set it to User. Then the captured image will be 
displayed the next time you turn on the projector.
To cancel the capture function, select Ye s in the "Quit?" 
confirmation box.
3Note:
 
						

							LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Setting
Enter a Logo PIN code
After a correct Logo PIN 
code is entered, the following 
dialog box appears.
Change the Logo PIN code lock setting
Change the Logo PIN code
Enter a Logo PIN code
When using side controlUse th
QXPEHU3UHVVWKH3RLQW
yEXWWRQWRIL[WKHQXPEHUDQG
move the red frame pointer to the next box. The number 
changes to ½. If you fix an incorrect number, use the Point 

correct, and then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to 
“Set”. Press the SELECT button so that you can start to 
operate the projector.
When using remote controlPress the Number buttons on the remote control to enter 
a number (p.14). When you complete entering a four-digit 
number, the pointer moves to “Set”. Press the SELECT 
button so that you can start to operate the projector.
If you enter an incorrect Logo PIN code, Logo PIN code
and the number (½½½½) will turn red for a moment. Enter 
the correct Logo PIN code all over again.
8VHWKH3RLQW
x
zEXWWRQVWRVZLWFKOnor Off, and 
then press the SELECT button to close the dialog box.
Change the Logo PIN code lock setting
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN CODE,
WRITE DOWN THE NEW PIN CODE IN COLUMN OF
THE LOGO PIN CODE NO. MEMO ON PAGE 87, AND
KEEP IT SECURELY. SHOULD THE LOGO PIN CODE
BE LOST OR FORGOTTEN, THE LOGO PIN CODE
SETTING CAN NO LONGER BE CHANGED.Logo PIN code change
Logo PIN code can be changed to your desired four-digit 
number. Press the SELECT button to select Logo PIN code 
change. Current logo PIN code dialog box appears, use 
the Point 
x
z buttons to enter the current code. The New 
Logo PIN code input dialog box appears. Set a new Logo 
PIN code, confirmation box appears, choose Yes to set the 
new Logo PIN code.
Be sure to note the new Logo PIN code and keep it on 
hand. If you lost the number, you could no longer change 
the Logo PIN code setting.  
buttons on the remote control to enter a number. 
54 
						

							LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Setting
Picture in Picture
Picture in Picture
Show the selected mode (Off/User 1-5) and its status 
(Stored /Free/Adj.).User 1 and User 2 have stored 
default values. See page 30 for details.
  User setting
P in P: Provide the images of Main picture and Sub 
picture at the ratio of Screen aspect in the Screen 
Menu.
P by P:Provide the images of Main picture and Sub 
picture at the ratio of 4:3.   P in P/P by P
Selected
Mode
Status (Stored /
Free/Adj.) of the 
selected mode.
  Main picture / Sub picture
Input««Select an input from Input 1-3. 
Source«Select an input source. The display varies 
depending on the selected input.
Size«««Select the display size. Main picture can be 
changed between 10 and 100%, and Sub 
picture can be changed between 10 to 50% in 
increments of 10%. When P by P is selected in 
Mode, the projection size is fixed to 50%.
Position«Press the SELECT button at Position and the 
display position setting screen appears.
Use the Point 
x
z
{
y buttons to adjust the display 
position of active frame indicated in white. The frame will 
disappear after 10 seconds or when the SELECT button is 
pressed.
Position Menu
Active frame
(White)
Center line
display
Selecting the Main picture or Sub pictureDuring Picture in Picture mode, and being undisplayed On 
Screen Menu, press the SELECT button to select Main or 
Sub picture. (A red frame will be displayed on the selected 
picture.)
Switching Input and SourceWhen selecting Main picture or Sub picture, input and 
source can be set by pressing the INPUT button on the 
side control or INPUT 1/2/3 button on the remote control. 
Operation on the On Screen Menu is not necessary.3Note:

						

							LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
HDMI setup
Set the Frame Lock to Main picture or Sub picture.Frame lock
Press the SELECT button at Reset to display a 
confirmation box. To reset, press the SELECT button at 
Ye s. Reset
Setting
To store the adjusted data.
Stored data
Vacant
Return to Picture in Picture menu.
This function is only used for HDMI input source.
Image
SelectNormal or Enhanced to match the video range 
setting of your HDMI Digital RGB equipment.
Sound
HDMI: When using the HDMI cable, select HDMI.
Both video and audio are transferred and you 
need not to connect any additional cables for 
audio.
AUDIO 1 : When using the DVI-HDMI cable, select 
AUDIO 1 and connect the audio cable to 
AUDIO 1 termimal.
The names for the output setting of Digital RGB vary from 
equipment to equipment. For details, refer to the user 
manual of your Digital RGB equipment.
When the black parts of the image are destroyed or stand
out, please switch to Normal or Enhanced, and then 
switch the output type of the HDMI Digital RGB output 
equipment.
HDMI setup
Mode free
Store
Delete the data stored in the Mode and return to Free. Use 
the Point 
x
z buttons to select Mode free and press the 
SELECT button to show the Where to free? dialog box. 
Move the highlight to one of the mode (User 1 - 5) which 
you want to delete and press the SELECT button. Then the 
confirmation box appears. To delete, select 
Ye s.
Store the adjusted data in the 
User 1-5. Use the Point 
x
z
buttons to select Store and press the SELECT button to 
show the Where to store? dialog box. Move the highlight 
to one of the mode (User 1 - 5) which you want to store 
and press the SELECT button. Then the confirmation box 
appears. To store adjusted data, select 
Ye s.
56 
						

							LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
This function allows you to change brightness of the 
screen.
Lamp life control
Lamp control
Select the lamp operation when the total lighting time of a 
lamp exceeds the recommended total hours of use.
     Mode 1.......  The lamp can be turned on even after 
exceeding the recommended total hours of 
use.
     Mode 2.......  The lamp can be turned on even after 
exceeding the recommended total 
hours of use. But the projector turns off 
automatically after 3 minutes.
Lamp life control
3Note:
‡
/DPSPRGHFDQQRWEHFKDQJHGIRUDZKLOHDIWHU
WXUQLQJRQWKHSURMHFWRU/DPSQHHGVVRPHWLPHWR

PRGHZLOOEHDFWLYHDIWHUWKHODPSLVVWDELOL]HG
‡,IMode 2 KDVEHHQVHOHFWHGDQGWKHSURMHFWLRQODPS
H[FHHGVWKHUHFRPPHQGHGWRWDOKRXUVRIXVHWKH
UHSODFHPHQWLFRQZLOOEHGLVSOD\HGDWWKHWLPHRI
SRZHURQ

  The Lamp replacement icon will not appear when the 
Display function is set to Off(p.52), during "Freeze" 
(p.30), or "Shutter" (p.27).
Lamp replacement icon
Setting
Auto ....Brightness according to the input signal. 
Normal . . Normal brightness. 
Eco 1  . . .   Lower brightness and decrease of fan speed. 
Lower brightness reduces the lamp power 
consumption and extends the lamp life.
Eco 2  . . .   Lower brightness and increase of fan speed. 
Lower brightness reduces the lamp power 
consumption and extends the lamp life. It is 
recommended to use Eco 2 when using the 
projector continuously over a long period of 
time. The fan noise becomes louder in Eco 
2 than in Eco 1. Select the suitable mode for 
the operating environment. 
Lamp control 
3Note:
 7KHIDQQRLVHEHFRPHVORXGHULQ(FRWKDQLQ(FR

57 
						

							LWU505 User Manual
020-000374-01 Rev.1 (01-2011)
Choose the running speed of cooling fans from the 
following options.
Normal.. Operate in this mode under normal 
conditions.
Max........ Use this mode when you want to increase the 
cooling effect when operating the projector in 
high ambient temperature environment. Fan 
noise is louder than Normal.
Setting
Simple mode buttons
Only these buttons are 
active when the simple 
mode is set to On. [ON, 
STAND-BY, SHUTTER, 
INPUT, MENU, AUTO 
3&6&5((1
x
z
087(
{92/80(

y92/80(
SELECT (Mouse Pointer 
included), L-CLICK, 
R-CLICK, P-TIMER, 
POINTER, PIP, ON-OFF 
switch] Number buttons 
(p.14) also become 
active only when setting 
the remote control codes 
numbers or entering the 
PIN code numbers (pp. 
54, 62).
Filter control
This function decides whether to activate the simple mode.
Off  . . . Simple mode function is off.
On....Only the simple mode buttons are active.