Home > Christie Digital Systems > Projector > Christie Digital Systems Lwu505 User Manual

Christie Digital Systems Lwu505 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Christie Digital Systems Lwu505 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 267 Christie Digital Systems manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							LWU505 User Manual
    020-000374-01 Rev.1 (01-2011)
    Appendix
    This projector provides a function to control and monitor the projector's operations by using the RS-232C 
    serial port.
    Connect a RS-232C serial cross cable to CONTROL 
    PORT on the projector and serial port on the PC.  
    (See p.19)
    Launch a communication software provided with PC 
    and setup the communication condition as follows:
    1
    2
    3
    Baud rate : 9600 / 19200 bps
    Parity check : none
    Stop bit    : 1
    Flow control : none
    Data bit    : 8
    Type the command for controlling the projector and 
    then press the "Enter" key. 
    Example
    When you want to change the input to INPUT 2, 
    Type 'C' '0' '6' and press the Enter key. 3Note:
    Enter with ASCII 64-byte capital 
    characters and one-byte characters.
    3Note:
     7KHGHIDXOWRIWKHEDXGUDWHLVVHWWR
    19200 bps,IDQHUURURFFXUVLQWKH
    FRPPXQLFDWLRQFKDQJHWKHVHULDOSRUW
    DQGWKHFRPPXQLFDWLRQVSHHGEDXG
    UDWH
    Serial Control Interface
    Operation
    List of Picture in Picture
    o : Picture in Picture combinations are enabled.
      x : Picture in Picture combinations are disabled.
    3Note:
     
    						
    							LWU505 User Manual
    020-000374-01 Rev.1 (01-2011)
    The command is sent from PC to the projector with the 
    format below;
        'C' [Command] 'CR'
         Command: two characters (refer to the command 
    table below.
    -The projector decodes the command and returns the 
    'ACK' with the format below;
        'ACK'  'CR'
    -When the projector can not decode the command, it 
    returns with format below.
        ‘?’  ‘CR’Format
    Appendix
    Command Function
    C00 Turn the projector ON
    C01Turn the projector OFF 
    (immediately OFF)
    C02 Turn the projector OFF
    C05 Select Input 1
    C06 Select Input 2
    C07 Select Input 3
    C08 Select Network
    C09 Volume +
    C0A Volume -
    C0B Sound mute ON
    C0C Sound mute OFF
    C0D Video mute ON
    C0E Video mute OFF
    C0F Screen Normal Size
    C10 Screen Full Size
    C1C Menu ON
    C1D Menu OFF
    C20 Brightness UP
    C21 Brightness DOWN
    C23 Select Input 2 Video
    C24 Select Input 2 Y, Pb/Cb,Pr/Cr 
    C25 Select Input 2 RGB
    C28 Direct on ON
    C29 Direct on OFF
    C33 Select Input 3 Video
    C34 Select Input 3 S-video
    C35 Select Input 3 Y, Pb/Cb,Pr/Cr Command Function
    C3A Pointer RIGHT
    C3B Pointer LEFT
    C3C Pointer UP
    C3D Pointer DOWN
    C3F Enter
    C46 Zoom DOWN
    C47 Zoom UP
    C4A Focus DOWN
    C4B Focus UP
    C4F Select Input 1 HDMI
    C50 Select Input 1 Analog RGB
    C51 Select Input 1 SCART
    C52 Select Input 1 DVI (PC Digital)
    C53 Select Input 1 DVI (AV HDCP) 
    C5D Lens shift UP
    C5E Lens shift DOWN
    C5F Lens shift LEFT
    C60 Lens shift RIGHT
    C89 Auto PC adj.
    C8E Keystone UP
    C8F Keystone DOWN
    C90 Keystone RIGHT
    C91 Keystone LEFT
    Functional Execution Command
    90 
    						
    							LWU505 User Manual
    020-000374-01 Rev.1 (01-2011)
    Appendix
    The command is sent from PC to the projector with the 
    format below;
        'CR' [Command] 'CR'
         Command: one character (refer to the command 
    table below.
    The projector decodes the command and returns the 
    'Character string' with the format below;Format
    The tables on page 90 and 91 show the typical command lists for controlling the projector.  Please consult 
    your local dealer for further information of other commands.
    Command FunctionProjector
    ReturnProjector status
    CR0 Status Read00Power On
    80Stand-by mode
    40Countdown
    20Cooling down
    10Power Malfunction
    28Cooling down at the temperature anomaly
    24Cooling down at Power Management mode
    04Power Management mode after Cooling down
    21Cooling down after the projector is turned off when the 
    lamps are out.
    81Stand-by mode after Cooling down when the lamps are out.
    88Stand-by mode after Cooling down at the temperature 
    anomaly.
    2CCooling down when the projector is turned off by the shutter 
    management function.
    8CStand-by mode after cooling down by the shutter 
    management function. 
    CR6 Temperature Read%1 %2
    %3 7HPSHUDWXUHDW6HQVRU
    						
    							KH2K
    Canada
    Christie Digital Systems Canada, Inc.
    809 Wellington St. N.
    Kitchener, Ontario N2G 4Y7
    PH: 519-744-8005
    FX: 519-749-3321
    Customer Service: 1-800-265-2171
    [email protected]
    Christie Digital Systems USA, Inc.
    10550 Camden Drive
    Cypress CA 90630
    PH: 714-236-8610
    FX: 714-503-3375
    Customer Service: 1-866-880-4462
    [email protected]
    United Kingdom
    Branch Office
    Christie Digital Systems Canada, Inc.
    ViewPoint
    200 Ashville Way
    Wokingham
    Berkshire, U.K.
    RG41 2PL
    PH: +44 (0) 118 977 8000
    FX: +44 (0) 118 977 8100
    [email protected]
    Chile
    Representative Office
    Christie Digital Systems USA, Inc.
    Av. Pedro Fontova 7619 of 60
    Santiago
    PH: 56-2-721 11 75
    Mobile: 5699 436 6555
    France
    Representative Office
    Christie Digital Systems Canada, Inc.
    Bâtiment D-Hall 4
    Parc Louis Roche
    96/114 Avenue Louis Roche
    F-92230 Gennevilliers
    France
    PH: +33 (0)1 41 21 44 04
    FX: +33 (0)1 41 21 00 36
    [email protected]
    Representative Office
    Christie Digital Systems Canada, Inc.
    Willicher Damm 129
    D-41066
    Mönchengladbach
    PH: +49 2161 664540
    FX: +49 2161 664546
    [email protected] Europe
    Representative Office
    Christie Digital Systems Canada, Inc.
    Regus Bank Centre
    Szabadsag ter 7.
    H-1054 Budapest
    Hungary
    PH: +36 (0)1 47 48 100
    FX: +36 (0)1 47 48 452
    [email protected]
    Middle East
    Representative Office
    Christie Digital Systems Canada, Inc.
    C/O Emirates Group Security
    Building,
    C Block, Room 207, 208, 209
    Airport Free Zone
    PO Box 293762
    Dubai, UAE
    PH: +971 (0) 4 299 7575
    FX: +971 (0) 4 299 8077Spain
    Christie Authorized Reseller
    Antonio Abad
    Polígono Industrial Ventorro Del
    Cano
    Esquina C/ Aldea del Fresno, 3 
    3ª Puerta. Izqda
    28925 Alcorcón, Madrid
    PH: + 34 91 633 9990 
    FX: + 34 91 633 9991Italy
    Christie Authorized Reseller
    Angelo Tacca
    Via Garibaldi, 88
    20024 Garbagnate Milanese (MI) 
    PH: +39 02 9902 1161
    FX: +39 02 9902 2641Africa
    Representative Office
    Christie Digital Systems Canada, Inc.
    4 Patricia Road
    Gillitts
    KwaZulu Natal
    3610
    Republic of South Africa
    PH: +27 (0) 317 671 347
    FX: +27 (0) 317 671 347
    MB: +27 (0) 823 045 442
    Singapore
    Branch Office
    Christie Digital Systems USA, Inc.
    627A Aljunied Road
    # 05-02 Biz Tech Centre 
    Singapore, 389842
    PH: +65 6877-8737
    FX: +65 6877-8747
    [email protected] - Beijing
    Representative Office
    Christie Digital Systems USA, Inc.
    7B15, Hanwei Plaza
    Guanghua Road
    Chaoyang District, 
    Beijing, 100004
    PH: +86 10 6561 0240 
    FX: +86 10 6561 0546
    [email protected] - Shanghai
    Representative Office
    Christie Digital Systems USA, Inc.
    Room 1109--1116 Shartex Plaza
    No. 88 Zun Yi South Road
    Shanghai 200336
    PH: +86 21 6278 7708
    FX: +86 21 6278 5816
    [email protected]
    Japan
    Representative Office
    Christie Digital Systems USA, Inc.
    A-bldg., 2nd Floor
    Ariake Frontier Building 
    3-1-25, Ariake, Koto-ku
    Tokyo, 135-0063
    PH: 81-3-3599-7481
    FX: 81-3-3599-7482
    [email protected] Korea
    Representative Office
    Christie Digital Systems USA, Inc.
    6F, ILSIN Building, 15-15
    Yeouido-dong,
    Yeongdeungpo-gu, Seoul,
    150-872 South Korea
    PH:+82 2 702 1601
    FX: +82 2 702 1602India
    Representative Office
    Christie Digital Systems USA, Inc.
    Unit No. 03, Navigator Building
    International Technology Park
    Whitefield Road
    Bangalore 560 066
    India
    PH: (080) 41468941 – 48
    FX: (080) 41468949
    Americas
    Europe, Middle East & Africa
    Asia Pacific 
    						
    							For the most current technical documentation, please visit www.christiedigital.com
    USA – Cypress
    ph: 714-236-8610
    Canada – Kitchener
    ph: 519-744-8005United Kingdom
    ph: +44 118 977 8000
    Germany
    ph:+492161664540
    France
    ph: +33 (0) 1 41 21 44 04Hungary/Eastern Europe
    ph: +36 (0) 1 47 48 100
    Singapore
    ph: +65 6877 8737
    Shanghai
    ph: +86 21 6278 7708Beijing
    ph: +86 10 6561 0240
    Korea
    ph: +82 2 702 1601
    Japan
    ph: +81 3 3599 7481
    Corporate offi ces Worldwide offi ces 
    						
    All Christie Digital Systems manuals Comments (0)

    Related Manuals for Christie Digital Systems Lwu505 User Manual