Christie Digital Systems Ds+60 Users Manual

Section 3: Operation 
 
Christie DS+60 User’s Manual     3-17  
FUNCTIONS WITHIN THE CHANNEL SETUP MENU —To copy, delete or edit a channel, 
highlight the desired channel in the Channel Setup menu and do one of two things: 
• Press 
Func if you want to copy the selected channel or delete this or 
other channels. See Copying or Deleting a Channel below. 
• Press 
 if you want to edit channel setups (i.e., non-image related 
parameters) for the selected channel. See Editing a Channel Setup, 
below. 
TO...

Section 3: Operation 
3-18   Christie DS+60 User’s Manual  
TO DELETE MULTIPLE CHANNELS, highlight any channel in the Channel Setup menu 
and press 
Func to go to the Channel Copy/Delete submenu. Select “Delete Unlocked 
Only” and press 
 to delete all unlocked channels. Or select “Delete All Channels” 
to delete all channels, even those that are locked. In either case, the current channel 
will remain but will be redefined from projector defaults. 
NOTE: For any deletion, a confirmation box appears to...

Section 3: Operation 
 
Christie DS+60 User’s Manual     3-19  
• AUTO SOURCE: If checked, (default), the projector can automatically locate 
this channel when an incoming input signal matches. If not checked, the 
projector can locate the selected channel only when it is directly selected via 
Channe l on the keypad—and a change in input signal will not result in a channel 
change. 
• 
LOCKED: If checked, all of the image settings for this channel are disabled. If 
unchecked (default), all available...

Section 3: Operation 
3-20   Christie DS+60 User’s Manual  
In the Size and Position menu, 
you can increase or decrease 
the size of your image, change 
its proportion (aspect ratio), 
move the image to a specific 
area of the screen, and refine 
other related parameters. Use 
Size and Position controls to 
match the image precisely to 
the screen used at the site. 
Refer to Using Slidebars and 
Other Controls (earlier in 
this section) if you need help 
using any of the options and controls. Changes...

Section 3: Operation 
 
Christie DS+60 User’s Manual     3-21  
 
• Select
 “NO RESIZING” to display the image in its native resolution, which may or 
may not match the projector’s 1400 x 1050 resolution. For example, for a source 
with a native resolution of 800 x 600, “No Resizing” will use the central 800 x 600 
pixels and have a black border—the black border areas are unused areas. See 
below. 
 
• Select “FULL SIZE” to use all 
pixels (1400 x 1050) for 
displaying the image, regardless 
of source or...

Section 3: Operation 
3-22   Christie DS+60 User’s Manual  
 
• Select “ANAMORPHIC” to display an anamorphic image 
in its native 16:9 aspect ratio. The image will fill the 
screen from side-to-side and be centered between black 
bars at top and bottom.  
 
Size 
“Size” controls both the image width and height in tandem, maintaining the current 
aspect ratio (proportion) of the displayed signal data.  
Vertical Stretch 
“Vertical Stretch” adjusts the height of the image while keeping the width constant....

Section 3: Operation 
 
Christie DS+60 User’s Manual     3-23  
H-Position 
This option moves the image right or left within the area of available pixels. 
NOTE: The value shown represents where the approximate center of the image lies in 
relation to the total number of pixels available horizontally. This varies widely 
according to the signal—watch the image while adjusting. 
V-Position 
This option moves the image up or down within the area of available pixels. 
NOTE: The value shown represents where...

Section 3: Operation 
3-24   Christie DS+60 User’s Manual  
BLANKING (TOP, BOTTOM, LEFT, and RIGHT): 
Crop the image as desired so that unwanted 
edges are removed from the display (changed to 
black—see right). Blanking defines the size of 
the Active Input Window, or area of interest. 
Range of adjustment depends on the source 
resolution and other factors.  
 
 
 
PLUG & DISPLAY (EDID): By default, a Plug & Play 
(EDID) source outputs a signal according to the EDID 
information provided by the...

Section 3: Operation 
 
Christie DS+60 User’s Manual     3-25  
Brightness 
(
SHORT CUT: Press Bright and adjust the slidebar.) 
“Brightness” increases or decreases the amount of black in the image (0-100). For best 
results, keep close to 50. Start with a high value and decrease so that dark areas do not 
become black (i.e., are “crushed”). Conversely, high brightness changes black to dark 
gray, causing washed-out images.  
Gamma 
(
SHORT CUT: Press Gamma and adjust the slidebar.) 
“Gamma” is a global...

Section 3: Operation 
3-26   Christie DS+60 User’s Manual  
Color Space 
“Color Space” determines how the color components of an analog 
input signal are decoded for accurate color in the display. 
Selecting a color space option is useful only for analog signals 
connected to 
INPUT 1, INPUT 2, or INPUT 5. Although color space 
for these analog signals is automatically determined by the 
projector, in some circumstances you may wish to override this and manually set a 
specific color space. NOTE: For...