Home > Christie Digital Systems > Projector > Christie Digital Systems Ds+5k, Kc-8k, Dw3k-6k, Kc, Mirage S+2-4-8k, Dlv1400-dx, Matrix 4000 Users Manual

Christie Digital Systems Ds+5k, Kc-8k, Dw3k-6k, Kc, Mirage S+2-4-8k, Dlv1400-dx, Matrix 4000 Users Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Christie Digital Systems Ds+5k, Kc-8k, Dw3k-6k, Kc, Mirage S+2-4-8k, Dlv1400-dx, Matrix 4000 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 267 Christie Digital Systems manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Appendix C 
    Serial Communication 
    Cables 
     
       User’s Manual     C-1 
    A serial link of RS232 or RS422 enables ASCII communication with the projector so 
    that it can be controlled remotely from a PC or other controller. From a PC, connect a 
    standard 9-wire RS232 serial cable to the 
    RS232 IN port. Or, for long-distance (>100 
    ft.) links with an RS422-compatible PC or controller, connect RS422 cable to the 
    RS422 port. 
     
      
    						
    							Appendix C: Serial Communication Cables 
    C-2      User’s Manual 
     
     
      
    						
    							Appendix D 
    Throw Distance 
     
       User’s Manual     D-1 
    Calculating Throw Distance 
    It is important throw distance be precisely calculated for your installation using the 
    appropriate formula from the chart below. To calculate throw distance you must know 
    the screen size and the lens type installed in the projector. In general, the larger you 
    want the image to be the greater the distance you must allow between the lens and the 
    screen. 
    NOTES: 1) Throw distance is 
    measured from the screen to 
    the center of the projector’s 
    front feet. 2) This 
    measurement is not 
    necessarily parallel to the 
    floor as the projector and 
    screen may be inclined. 3) 
    Due to lens manufacturing, 
    throw distance calculations 
    have a tolerance of 
    ± 5%. 
    Table A-1 Throw Distance Formulas 
    Screen Widths (cm) Lens Throw Ratio Throw Distance Formula (cm) 
    Min. Max. 
    0.73 0.7618*W+6.7624  150 437 
    1.2:1 (long throw) 1.2521*W+10.817 79 812 
    1.45-1.8 Min. 1.4789*W-3.6096 
    Max.  1.8655*W-8.1977 160 
    127 1102 
    889 
    1.8-2.5 Min. 2.0424*W-74.131 
    Max. 2.6076*W-16.638 160 
    117 1110 
    800 
    2.5-4.5 Min. 2.6347*W-11.428 
    Max. 4.783*W-29.602 244 
    137 1118 
    1110 
    4.5-7.3 Min. 4.5126*W-6.5502 
    Max. 7.423*W-25.184 267 
    165 1110 
    1095 
    NOTES: 1.2:1 (short throw) lens information not available at time of printing. Calculations are 
    not shown for 1.2:1 (long throw) lenses. 
    Where:  
    TD = projector distance from the screen to the center of the projector’s front feet. 
    W = screen (image) width (cm) 
     
      
    						
    							Appendix D: Throw Distance 
    D-2      User’s Manual 
     
      
    						
    							Appendix D: Throw Distance 
     
       User’s Manual     D-3 
     
      
    						
    							Appendix D: Throw Distance 
    D-4      User’s Manual 
     
     
      
    						
    							Appendix D: Throw Distance 
     
       User’s Manual     D-5 
     
      
    						
    							Appendix D: Throw Distance 
    D-6      User’s Manual 
     
     
      
    						
    							Appendix D: Throw Distance 
     
       User’s Manual     D-7 
     
      
    						
    							Appendix D: Throw Distance 
    D-8      User’s Manual 
     
     
     
      
    						
    All Christie Digital Systems manuals Comments (0)

    Related Manuals for Christie Digital Systems Ds+5k, Kc-8k, Dw3k-6k, Kc, Mirage S+2-4-8k, Dlv1400-dx, Matrix 4000 Users Manual