Christie Digital Systems Cp2215 User Manual

CP2215 User Manual63020-101225-01 Rev. 1 (01-2014)
Test Patterns
Add or Remove Test Patterns from the Preferred
Test Patterns Pane
You need Administrator or Service permissions to complete this procedure.
1. Tap Menu > Administrator Setup > Preferred Test Pattern Setup.
2. To add a test pattern to the Preferred Test Pattern pane, tap and drag a test pattern from the 
Unselected Patterns list to User Selected (Drag and Drop) pane.
3. To remove a test pattern from the Preferred Test Pattern pane, tap and...

CP2215 User Manual65020-101225-01 Rev. 1 (01-2014)
View 3D Content
 This section provides information and procedures for setting up and managing 3D presentations.
Display Requirements
To display 3D images you require these items:
• A 3D hardware system:
• Pi-Cell polarizer for display on a screen that has a silver polarization-preserving surface for 
use with passive glasses (RealD).
• Rotating polarizing wheel (external) with passive circular polarizing glasses 
(MasterImage). Requires a silver screen....

66                                                                                                                                                            CP2215 User Manual020-101225-01 Rev. 1 (01-2014)
View 3D Content
Hardware Setup
Use an infrared emitter to control gating in active glasses, a polarizing Z-screen (Pi-cell) with passive 
glasses, or filter wheel with passive glasses.
Create a High Frame Rate 3D File
Use this procedure to create 24Hz, 48Hz, and 60Hz high frame rate 3D files. These...

   View 3D Content
CP2215 User Manual67020-101225-01 Rev. 1 (01-2014)
3. Complete these fields:
4. Tap Save.
Field Description
3D Sync Input Mode Specifies whether a specific frame of input data has left eye or right eye 
data.
Select Use White Line Code (true and inverted) if you are using a 
single 3D input signal in which an embedded white line at the bottom of 
each frame identifies left and right, and an additional separate 3D stereo 
sync input at the GPIO port is not present. The bottom row of the...

68                                                                                                                                                            CP2215 User Manual020-101225-01 Rev. 1 (01-2014)
View 3D Content
Edit the Default 3D Lamp File
For 3D images to display correctly, you must edit the default 3D lamp file to match the specifications 
of your 3D hardware.
1. Tap Menu > Advanced Setup > Lamp Power / LiteLOC
™ Setup.
2. Select Default 3D in the Current Lamp File list.
3. Set the...

   View 3D Content
CP2215 User Manual69020-101225-01 Rev. 1 (01-2014)
b. Select DC28_DCIXYZE_314_351 in the Target Color list.
c. Select YCxCz Inverse ICT in the Color Space list.
d. Select Gamma 2.6 in the Gamma list.
e. Select Linear_9x9x9 in the LUT-CLUT list.
5. Tap 3D Control in the left pane and edit these settings:
a. Select Line Interleave in the 3D Sync Input Mode list.
b. Select a frame rate suitable to your 3D system in the Frame Rate N:M list. For example, 
for 24Hz 3D, select 2:2, 4:2, or...

70                                                                                                                                                            CP2215 User Manual020-101225-01 Rev. 1 (01-2014)
View 3D Content
e. Enter 430 in the Dark Time field or enter a value appropriate for your 3D hardware.
f. Enter -120 in the Output Delay field or enter a value appropriate for your 3D hardware.
g. Enter 0 in the Phase Delay field or enter a value appropriate for your 3D hardware.
Display 3D Diagnostic...

CP2215 User Manual71020-101225-01 Rev. 1 (01-2014)
Troubleshooting
This section provides information and procedures for resolving common projector issues. If you 
cannot resolve a projector issue, contact Christie support
. In order that a support representative can 
better assist you, have the model and serial number of your projector ready. For contact information 
see the back cover of this document.
Projector Functionality
IssueResolution
Projector does not turn on • Verify the power cord is...

72                                                                                                                                                            CP2215 User Manual020-101225-01 Rev. 1 (01-2014)
Troubleshooting
Lamp Functionality
Display Issues
IssueResolution
Lamp does not ignite • Tap Menu > Advanced Setup > Lamp History and verify the number of 
hours the lamp has operated. Replace a lamp nearing the end of its 
operational life.
• Tap Menu > Status and then Interlocks in the left pane....