Christie Digital Systems Cp2215 User Manual
Have a look at the manual Christie Digital Systems Cp2215 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 267 Christie Digital Systems manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NOTICES COPYRIGHT AND TRADEMARKS © 2013 Christie Digital Systems USA Inc. All rights reserved. All brand names and product names are trademarks, registered trademarks or trade names of their respective holders. REGULATORY The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a commercial environment. The product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of the product in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at the user’s own expense. CAN ICES-3 (A) / NMB-3 (A) 9Ê † †$ê 8-Š8ÿ(A _)9’*² :Z9æEb:WG¿G*³9š G² † †9Ê8z% Ef,:9æ (f$ê 38ÿ9æ$ê 9Ê:f9š ;R9®G®52 † .j)Ò,Æ, V:k 8Î9®
CP2215 User Manuali020-101225-01 Rev. 1 (01-2014) Table of Contents Installation and Setup............................................. 1 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 AC/Power Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Power Cords and Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Lamp Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Projector Components - Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Projector Components - Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Position the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Adjust Tilt and Level the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Install the Touch Panel Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connect the Exhaust Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Install the Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Install the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Connect Devices to the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Projector Connections and Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connect the Projector to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Connect Devices to the 3D Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Connect Devices to the GPIO Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Connect Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Turn the Projector On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Log On to the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Activate Marriage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Add the Projector to a Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Add the Lamp Information to the Lamp History . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Turn the Lamp On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Align the Lamp with LampLOC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Adjust the Image to Fit Your Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Play Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Unencrypted Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Encrypted Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Adjust the Image................................................ 21 Correct Keystone Effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Correct Vignetting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Adjust Vertical Boresight Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Adjust Horizontal Boresight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
ii CP2215 User Manual020-101225-01 Rev. 1 (01-2014) Adjust DMD Convergence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Align the Fold Mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Color Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Screen Masking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Calibrate Screen Brightness (fL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Access the Projector and Run Diagnostics........................... 29 The Touch Panel Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 The Main Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Log On to the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 LED Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 View the Status of Projector Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Respond to Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Run the Projector Interrogator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 View SMPTE Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Clear SMPTE Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Retrieve System Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Run a Server Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Turn the Projector Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Manage the DLP................................................. 35 Reset the DLP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Run a DLP Self Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Download an ICP Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Download an LD Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Disable the ICP Signature Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Indicate an LD is Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Work with Channels.............................................. 37 Create a New Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Activate a Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Restore Default Channel Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Change the Channel Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Add or Remove Preferred Channels from the Preferred Channels Pane . . . . . . . . . . . . 40 Manage Lamp Information......................................... 41 Create a New Lamp File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Modify an Existing Lamp File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Enable or Disable LiteLOC on a Lamp File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Adjust Lamp Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
CP2215 User Manualiii020-101225-01 Rev. 1 (01-2014) Change the Lamp Power Percentage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 View Lamp Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Receive an Alarm when a Lamp Reaches Its Expiry Date . . . . . . . . . . . . . . . . . . . . 42 Add a Lamp to the Lamp History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Verify Current Lamp Intensity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Manage Projector Setting Files.................................... 45 Create a Source File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Modify a Source File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Create a Screen File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Modify a Screen File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Create a MCGD File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Modify a MCGD File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Create a TCGD File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Modify a TCGD File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Create a New ILS File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Edit an Existing ILS File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Enable Automatic ILS Adjustment on a Channel . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Reset ILS File Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Add a Lens Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Enable Automatic ILS on a Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Reset the Lens Position on Projector Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Complete a Full Lens Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Reset the ILS and the Lens Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Work with the Scheduler......................................... 51 Schedule the Projector to Turn On or Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Edit a Scheduled Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Delete a Scheduled Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Delete All Scheduled Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Turn the Scheduler Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 View and Modify Projector Settings................................ 53 Set Projector and TPC Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Adjust Projector Time Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Modify Projector Communication Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Add a Network Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Access a Network Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Calibrate the Internal Light Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
iv CP2215 User Manual020-101225-01 Rev. 1 (01-2014) View the Microsoft Windows Task Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 View the Microsoft Windows Computer Management Console . . . . . . . . . . . . . . . . . . 55 View Microsoft Windows Explorer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 View the Microsoft Network Connections Window . . . . . . . . . . . . . . . . . . . . . . . . . . 56 View Projector Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Record the Lens Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Manage User Accounts........................................... 57 User Access Permissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Add a User Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Change a User Account Password or Permissions . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Delete a User Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Backup, Restore, and Upgrade Projector Files........................ 59 Add an Upgrade File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Remove an Upgrade File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Install an Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Back up Projector Settings and Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Restore a File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Restore Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Move Files to the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Delete Projector Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Test Patterns.................................................... 63 Add or Remove Test Patterns from the Preferred Test Patterns Pane . . . . . . . . . . . . . 63 Turn a Test Pattern On or Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Display a Full Screen Test Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 View 3D Content................................................. 65 Display Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 3D Sync Terminal PIN Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Hardware Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Create a High Frame Rate 3D File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Edit the Default 3D Lamp File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Define a Measured Color Gamut Data File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Edit the 3D Flat 1998 x 1080 Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Edit the 3D Scope 2048 x 858 Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Display 3D Diagnostic Test Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Verify 3D Cinema Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
CP2215 User Manualv020-101225-01 Rev. 1 (01-2014) Troubleshooting................................................ 71 Projector Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Lamp Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Display Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Maintenance................................................... 75 Inspect Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Check the Coolant Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Clean the Radiator Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Inspect the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Inspect and Clean Optics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Clean the Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Replace the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Remove the Existing Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Install the New Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Inspect the Card Cage Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Cleaning a Washable Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Replace the Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Specifications.................................................. 85 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Panel Resolution and Refresh Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Achievable Brightness (Measured at Screen Center) . . . . . . . . . . . . . . . . . . . . . 85 Achievable Contrast Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Color and Gray Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 White Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Gamma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Control Signal Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Ethernet Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 RS232-PIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 RS232-ICP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 GPIO Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 SCCI Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 3D Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 USB 1 Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 USB 2 Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 MALM Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Touch Panel Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
vi CP2215 User Manual020-101225-01 Rev. 1 (01-2014) AC Input (A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 UPS AC Input (B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Regulatory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Electro-Magnetic Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Certification Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Non-Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Standard (sold with product) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
CP2215 User Manual1020-101225-01 Rev. 1 (01-2014) Installation and Setup This manual is intended for professionally trained operators of Christie high-brightness projection systems. These operators are qualified to replace the lamp and air filter, but should not attempt to install or service the projector. Only accredited Christie technicians who are knowledgeable about the hazards associated with high-voltage, ultraviolet exposure, and the high temperatures generated by the projector lamp are authorized to assemble, install, and service the projector. In addition, only Christie accredited personnel are authorized to perform security procedures such as marriage. This section provides information and procedures for positioning and installing the projector. Safety Precautions When installing the projector, observe these important safety rules to avoid personal injury or damage to the projector: When accessing a restricted access location for projector service or maintenance, avoid exposure to the projector beam path by making sure to either: • Turn the projector power off and disconnect the projector from AC power • Shutter the lamp to avoid emissions from the front aperture Failure to comply results in death or serious injury. • Never look directly into the projector lens or at the lamp. The extremely high brightness can cause permanent eye damage. For protection from ultraviolet radiation, keep all projector housings intact during operation. Protective safety clothing and safety goggles are recommended during servicing. Failure to comply could result in death or serious injury. • FIRE HAZARD! Keep hands, clothes, and all combustible material away from the concentrated light beam of the lamp. Failure to comply could result in death or serious injury. Position all cables where they cannot contact hot surfaces or be pulled or tripped over. Failure to comply could result in minor or moderate injury. This projector must be operated in an environment that meets the operating range specification. See Operating Environment on page 92.
Installation and Setup CP2215 User Manual2020-101225-01 Rev. 1 (01-2014) AC/Power Precautions Power Cords and Attachments • Use only the AC power cord that is provided with the projector. DO NOT attempt operation if the AC supply is not within the specified voltage and power range. Failure to comply could result in death or serious injury. • As a safety feature the projector is equipped with a three-wire plug with a third (grounding) pin. If you are unable to insert the plug into the outlet, contact an electrician to have the outlet replaced. DO NOT defeat the safety purpose of the grounding-type plug. Failure to comply could result in death or serious injury. • DO NOT attempt operation if the AC supply is not within the rated voltage range, as specified on the license label. Failure to comply could result in death or serious injury. • Disconnect projector from AC before opening any enclosure. Failure to comply could result in death or serious injury. • The dedicated earth wire can only be installed by a Christie accredited service technician or an electrician. The protected earth wire must be green/yellow 12 AWG minimum. • DO NOT allow anything to rest on the power cord. Locate the projector where the cord cannot be damaged by persons walking on it or objects rolling over it. Never operate the projector if the power cable appears damaged in any way. Failure to comply could result in minor or moderate injury. • DO NOT overload power outlets and extension cords as this can result in fire or shock hazards. Failure to comply could result in minor or moderate injury. • Only qualified service technicians are permitted to open projector enclosures and only if the projector is disconnected from AC power. Failure to comply could result in minor or moderate injury. A power cord rated for your region is provided with each projector. Make sure that you are using a power cord, socket, and power plug that meets the appropriate local rating standards. Use only an AC power cord recommended by Christie. DO NOT attempt operation if the AC supply and cord are not within the specified voltage and power range. Failure to comply could result in death or serious injury. Use only the attachments and/or accessories recommended by Christie. Use of others may result in the risk of fire, shock and personal injury