Casio Projector XJ-V1 User Manual
Here you can view all the pages of manual Casio Projector XJ-V1 User Manual. The Casio manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
1 DATA PROJECTOR XJ-V1 User’s Guide zBe sure to read the “Safety Precautions” and “Operating Precautions” in the “Setup Guide” document, and make sure you use this product correctly. zKeep this manual in a safe place for future reference. zVisit the site below for the latest version of this manual and the “Setup Guide”. http://world.casio.com/manual/projector/EN
Page 2
2 zDLP is a registered trademark of Texas Instruments of the United States. zHDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. zXGA is a registered trademark of IBM Corporation of the United States. zOther company and product names may be registered product names or trademarks of their respective owners. zThe contents of this User’s Guide are subject to change without notice. zCopying of this manual, either in part or its...
Page 3
3 Contents Useful Features and Functions ...................................... 5 Getting Ready .................................................................. 6 Setting Up the Projector .........................................................................6 Setup Precautions ....................................................................................................... 6 Connecting Projector Cables .................................................................7 Remote Controller...
Page 4
4 Using the Setup Menu (MENU) ............................................................19 Basic Setup Menu Operations ................................................................................... 19 Setup Menu Settings ................................................................................................. 19 Password Protection ............................................................................23 Using the Password...
Page 5
5 Useful Features and Functions zMercury-free Hybrid Light Source A CASIO-original laser and LED hybr id light source delivers high luminance up to 2,700 lumens. This projector does not use a mercury lamp, making it environmentally friendly. z No-wait Projection A CASIO hybrid light source reaches maximum brightness immediately after power is turned on, compared with a wait of approximately one minute normally required with a mercury lamp. The light source will even reach maximum brightness...
Page 6
6 Getting Ready This section explains how to select a location for the projector, how to connect its cables, and how to perform other operations required before using it. Locate the projector on a desk, table, or stand that is firm and level. Make sure that you allow sufficient space around the sides and back of the projector for proper ventilation. The illustrations below show how the projector should be oriented relative to the screen for optimum projection. Setup Precautions zUse a conveniently...
Page 7
7 Connect the projector to a power outlet and to an input source device. NotezFor more information about component video connection, see “Connecting to a Component Video Output” on page 32. z For information about how to co nnect for RS-232C control of the projector, see “Projector RS-232C Control” (page 39). z For information about how to connect in order to update the projector firmware, see “Updating Firmware” (page 33). Connecting Projector Cables Use an RGB cable to connect to the RGB output...
Page 8
8 Projector operations are performed using the remote controller that comes with it. Point the remote controller signal emitter at one of the signal receivers on the projector as you perform remote controller key operations. The maximum range of the remote controller signal is approximately 5 meters (16.4 feet) (between signal emitter and receiver). Important!zTo avoid running down the battery, store the remote control unit so its keys are not pressed inadvertently. Remote Controller 1Remote control...
Page 9
9 To load remote controller batteries Important!zBe sure to use alkaline batteries only. To replace remote controller batteries Open the battery cover on the back of the remote controller, replace the old batteries with new ones, and then close the battery cover. *CautionRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. 1.Open the battery cover on the back of the remote controller.2.Load two new batteries into the case, making sure...
Page 10
10 Operating the Projector This section explains how to use the remote controller to perform projector operations. To select the input source 1.Press the [INPUT] key. 2.On the “Input” dialog box that appears, use the [INPUT], [S] and [T] keys to select the input source you want and then press the [ENTER] key. zIf you do not press the [ENTER] key, the projector will automatically apply the currently selected input source after about two seconds. zThe name of the input source you selected will appear in...