Casio Exilim EX ZR100 User Manual

131Printing
.Configuring the Same DPOF  Settings for All the Images
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * 
DPOF Printing  * All images
1.Use [ 8] and [ 2] to specify the  number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• Note that the specified number of copies  will be printed for all of the images in 
any CS group included with the images.
• If you want to include the date in the images, press [ 0] (Movie) so “On” is...

132Printing
.To configure the same DPOF settings for all the images in a CS 
group
1.While CS image playback is in progre ss or paused (toggle by pressing 
[SET]), press [ 2].
This will display the “CS Frame Edit” menu.
2.Use [ 8] and [ 2] to select “DPOF Printing” and then press [SET].
3.Use [ 8] and [ 2] to select “Frame all”  and then press [SET].
4.Use [8] and [ 2] to specify the  number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to...

133Printing
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute will be performed using the last DPOF 
settings you configured for the images. To clear DPOF settings, specify “00” for the 
number of copies of all images.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be sure to tell them that it 
includes DPOF settings for the images to be printed and the number of copies. If you...

134Printing
.Standards Supported by the Camera
• PictBridge
This is a standard of the Camera and Imaging Products Association 
(CIPA). You can connect the camera directly to a printer that supports 
PictBridge, and perform image selection and printing using the 
camera monitor screen and controls.
• PRINT Image Matching III
Using image editing software and printing on a printer that supports 
PRINT Image Matching III makes it possible to use information about 
shooting conditions that is recorded with...

135Using the Camera with a Computer
Using the Camera with a Computer
You can perform the operations described below while the camera is connected to a 
computer.
*Windows only
The procedures you need to perform when using the camera with your computer and 
when using the bundled software are different for Windows and the Macintosh.
Things you can do using a computer...
Save images to a 
computer and view 
them thereSave images and view them manually 
(USB connection) (pages 137, 148).
Transfer images...

136Using the Camera with a Computer
Install the required software in accordance with the version of Windows you are 
running and what you want to do.
*YouTube Uploader for CASIO, Photo Transport, Virtual Painter 5 LE for CASIO, and 
Dynamic Photo Manager will not run under 64-bit versions of Windows OS.
Using the Camera with a Windows Computer
When you want to 
do this:Operating System 
VersionInstall this software:See 
page:
Save images to a 
computer and view 
them there manuallyWindows 7, 
Windows...

137Using the Camera with a Computer
.Computer System Requirements for Bundled Software
Computer system requirements are different for each of the applications. See the 
“Read me” file that comes with each application for details. Information about 
computer system requirements also can be found under “Computer System 
Requirements for Bundled Software” on page 179 of this manual.
.Precautions for Windows Users
• Except for Adobe Reader, the bundled software requires Administrator privileges to 
run.
•...

138Using the Camera with a Computer
4.Turn off the camera and then use the USB cable that comes with the 
camera to connect it to your computer.
• The camera does not draw power over the USB cable. Check the battery level 
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you 
feel it click securely into place. Failure to insert the connector fully can result in 
poor communication or malfunction.
• Note that even while the...

139Using the Camera with a Computer
10.Windows 7, Windows Vista users: Click “Start” and then “Documents”.
Windows XP users: Click “Start” and then “My Documents”.
• If you already have a “DCIM” folder in “Documents” (Windows 7, Windows 
Vista) or “My Documents” (Windows XP), the next step will overwrite it. If you 
want to keep the existing “DCIM” folder, you need to change its name or move 
it to a different location before performing the next step.
11.Windows 7 users: On the “Documents” “Organize”...

140Using the Camera with a Computer
.To view images you copied to your computer
1.Double-click the copied “DCIM” folder to open it.
2.Double-click the folder that contains the images you want to view.
3.Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 154.
• An image that was rotated on the camera will be displayed on your computer 
screen in its original (unrotated) orientation.
• Viewing a CS image on a computer will individually...