Casio Exilim EX ZR100 User Manual

181Appendix
The tables in this section show the initial default settings that are configured for menu 
items (displayed when you press [MENU]) after you reset the camera (page 165). 
Menu items depend on whether the camera is in the REC mode or PLAY mode.
• A dash (–) indicates an item whose setting is not reset or an item for which there is 
no reset setting.
IMPORTANT!
• Switching the recording mode (page 25) to “Premium Auto” will make some menu 
items unavailable.
.REC Mode
“REC” Tab
Reset Initial...

182Appendix
“Quality” Tab
“Set Up” Tab
 Quality 
(Snapshots)Normal
 Quality 
(Movies)FHD
MeteringB Multi
LightingOn
T
»
Flash Intensity0
Color FilterOff
Sharpness0
Saturation0
Contrast0
ScreenAuto
Auto RotateOn
SoundsStartup: Sound 1 / 
Half Shutter: 
Sound 1 / 
Shutter: Sound 1 / 
Operation: 
Sound 1 / 
=Operation: 
...///// 
=Play: ...////
File No.Continue
Create Folder–
World Time–
TimestampOff
Adjust–
Date Style–
Language–
Sleep1 min
Auto Power Off5 min
REC/PLAYPower On
USBMass Storage
Video Out–...

183Appendix
.PLAY Mode
“PLAY” Tab
“Set Up” Tab
• The contents of the “Set Up” tab are the same in the REC mode and PLAY mode.
SlideshowImages: All images / 
Time: 30 min / 
Interval: 3 sec / 
Effect: Pattern 1
Dynamic Photo–
Movie 
Converter–
MOTION PRINTCreate
Movie Editing–
Lighting–
White Balance–
Brightness–
DPOF Printing–
Protect–
Date/Time–
Rotation–
Resize–
Trimming–
Copy–
Divide Group–
CS Multi Print–
CS Frame Edit–
Downloaded From camera-usermanual.com Casio Manuals 

184Appendix
When things don’t go right... 
Troubleshooting
ProblemPossible Cause and Recommended Action
Power Supply
Power does not 
turn on.1)The battery may not be loaded correctly (page 17).
2)The battery may be dead. Charge the battery (page 16). If the 
battery goes dead soon after being charged, it means the 
battery has reached the end of its life and needs to be 
replaced. Purchase a separately available CASIO NP-130 
rechargeable lithium ion battery.
The camera 
suddenly powers 
down.1)Auto...

185Appendix
The subject is out 
of focus in the 
recorded image.The image may not be focused properly. When composing the 
image, make sure the subject is located inside the focus frame.
The flash does not 
fire.1)If ?
 (Flash Off) is selected as the flash mode, change to 
another mode (page 43).
2) If the battery is low, charge it (page 16).
3) If a BEST SHOT scene that uses ?
 (Flash Off) is selected, 
change to a different flash mode (page 43) or select a 
different BEST SHOT scene (page 70).
The ?...

186Appendix
A recorded image 
was not saved.1)Camera power may have been turned off before the save 
operation was complete, which will result in the image not 
being saved. If the battery indicator shows  , charge the 
battery as soon as possible (page 18).
2) You may have removed the memory card from the camera 
before the save operation was complete, which will result in 
the image not being saved. Do not remove the memory card 
before the save operation is complete.
Though available 
lighting is...

187Appendix
Playback
The color of the 
playback image is 
different from what 
appears on the 
monitor screen 
when shooting.Sunlight or light from another source may be shining directly 
into the lens when you are shooting. Position the camera so 
sunlight does not shine directly into the lens.
Images are not 
displayed.This camera cannot display non-DCF images recorded onto a 
memory card using another digital camera.
Images cannot be 
edited (with White 
Balance, 
Brightness, Resize, 
Trimming,...

188Appendix
Language selection 
screen appears 
when the camera is 
turned on.1) You did not configure initial settings after purchasing the 
camera or the camera may have been left with a dead 
battery. Configure the correct settings (pages 19, 161).
2) There may be a problem with the camera’s memory data. If 
this is the case, perform the reset operation to initialize the 
camera’s setup (page 165). After that, configure each setting. 
If the language selection screen does not re-appear when you 
turn...

189Appendix
Display Messages
ALERTThe camera’s protection function may have activated 
because camera temperature is too high. Turn off the 
camera and wait until it cools down before trying to use it 
again.
Battery is low.Battery power is low.
Cannot find the file.The image you specified with the slideshow “Images” 
setting cannot be found. Change the “Images” setting (page 
111) and try again.
Cannot register any 
more files.You are attempting to save a user BEST SHOT scene in 
the “SCENE” folder when...

190Appendix
Memory FullMemory is full with images you recorded and/or files saved 
by editing operations. When shooting with Prerecord CS, 
this message indicates that there is not enough memory 
capacity to record all of the pre-recorded images. Delete 
files you no longer need (page 29).
Printing ErrorAn error occurred while printing.
• The printer is turned off.
• The printer generated an error, etc.
Record ErrorImage compression could not be performed for some 
reason during image data recording....