Casio Exilim EX ZR100 User Manual

101Viewing Snapshots and Movies
Each time you perform a continuous shutter (CS) operation, the camera creates a CS 
group that includes all of the images for that particular CS session. You can use the 
following procedure to play back the images in a particular CS group.
1.Press [p] (PLAY) and then use [4] and [6] to display the CS group 
whose images you want to view.
2.About one second after you select a CS group, high speed playback of 
its images will start automatically.
• After playback of a CS...

102Viewing Snapshots and Movies
The following are operations that are supported after you press [SET] to 
start image playback.
You can use the following procedures to delete images while playback is in progress 
or paused.
.Deleting a Specific CS Group File
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Delete” and then press [SET].
3.Use [4] and [6] to display the image you want to...

103Viewing Snapshots and Movies
.Deleting Multiple Files in a CS Group
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Delete” and then press [SET].
3.Use [8] and [2] to select “Delete Frames” and then press [SET].
• This displays a file selection screen.
4.Use [8], [2], [4], and [6] to move the selection boundary to the file 
you want to delete, and then press [SET].
• This will select the...

104Viewing Snapshots and Movies
Use the following to divide up a CS Group into individual images.
.Dividing Up a Specific CS Group
1.While a CS group is displayed or while the images of a CS group are 
scrolling on the monitor screen, press [MENU].
2.Use [4] and [6] to select the “PLAY” tab.
3.Use [8] and [2] to select “Divide Group” and then press [6].
4.Use [4] and [6] to display the CS group you want to divide up.
5.Use [8] and [2] to select “Divide” and then press [SET].
• To divide up other CS group...

105Viewing Snapshots and Movies
Use the following procedure to copy an image in a CS group to a location outside of 
the group.
1.While CS image playback is in progress or paused (toggle by pressing 
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Copy”, and then press [SET].
3.Use [4] and [6] to display the image you want to copy.
4.Use [8] and [2] to select “Copy”, and then press [SET].
NOTE
• The functions below cannot be performed on snapshots inside a CS...

106Viewing Snapshots and Movies
1.In the PLAY mode, use [4] and [6] to scroll through the images until 
the one you want is displayed.
2.Slide the zoom controller towards z ([) to 
zoom.
You can use [8], [2], [4], and [6] to scroll the zoomed 
image on the monitor screen. Slide the zoom controller 
towards w to unzoom the image.
– When monitor screen contents are turned on, a 
graphic in the lower right corner of the screen 
shows what part of the zoomed image is currently 
displayed.
– To exit the zoom...

107Viewing Snapshots and Movies
1.Use the AV cable that comes with the camera to connect it to the TV.
• Make sure that you insert the cable connector into the USB/AV port until you 
feel it click securely into place. Failure to insert the connector fully can result in 
poor communication or malfunction.
• Note that even while the connector is fully inserted, you 
still will be able to see the metal part of the connector as 
shown in the illustration.
• Make sure that the camera is turned off before...

108Viewing Snapshots and Movies
3.Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing 
on the camera’s monitor screen.
• Pressing [ON/OFF] (Power) or [r] (REC) will not turn on the camera while the 
AV cable is connected.
• You also can change the aspect ratio of the screen and the video output 
system (page 163).
4.Now you can display images and play back movies as you normally do.
IMPORTANT!
• Before connecting to a TV to display...

109Viewing Snapshots and Movies
Use a commercially available HDMI cable to 
connect the camera to the TV. For information 
about playback, see the procedure starting 
from step 2 under “Viewing Snapshots and 
Movies on a TV Screen” on page 107.
• Use a commercially available HDMI cable that is marked with the logo shown to the 
right.
IMPORTANT!
• Output to a TV is not supported while the camera is in the REC mode.
NOTE
• Use a HDMI cable that with a plug that is compatible with the camera’s HDMI mini...

110Viewing Snapshots and Movies
.Selecting the HDMI Terminal Output Method (HDMI Output)
Procedure
[MENU] * Set Up Tab * HDMI Output
Use this setting to select the digital signal format when connecting to a TV with an 
HDMI cable.
*1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required output 
method may be 576p when outputting to a digital TV in a PAL reception area that does 
not support 1080i 60i. If you are in a PAL reception area and nothing is displayed 
automatically,...