Casio Exilim EX Z30 User Manual

							GETTING READY
21
KJI
IBattery compartment coverJConnectorKTripod screw hole
*Use this hole when attaching to a tripod.

 BottomUSB Cradle
Simply placing your CASIO digital camera onto the USB
cradle lets you perform the following tasks.
Battery charging (page 28)
Automatic transfer of images to a computer (page 151)
Direct connection to a printer for printing (page 146)
Viewing of images using the Photo Stand slideshow
feature (page 106).
1Camera connector2[USB] lamp3[USB] button4[CHARGE] lamp5[PHOTO] button
3 21
5
4
76

 Back
6[DC IN 5.3V]
(AC adaptor connector)
7[USB]
(USB port)

 Front
LStopperMMemory card slotNBattery compartment
NM
L
Downloaded From camera-usermanual.com Casio Manuals 
						

							GETTING READY
22
Monitor Screen Contents
The monitor screen uses various indicators and icons to keep you informed of the camera’s status.
REC mode
2Focus Mode indicatorNone Auto FocusMacroPan FocusInfinityManual Focus
3White balance indicatorNone AutoSunlightOvercastShadeLight BulbFluorescentManual
4Self-timerNone 1-Image
10sSelf-timer 10 sec
2sSelf-timer 2 sec
x3Triple self-timer
8QualityFINE
NORMAL
ECONOMY
9Built-in memory selected
for data storage.
Memory card selected
for data storage.
0Date and time
AEV value
BBattery capacity
CFocus frame Focusing complete: Green
Focusing failed: Red
56
7
8
9
0
A B C345REC modesSnapshotBESTSHOTMovieSnapshot AudioVoice Recording
6Memory capacity(Remaining number of storable
images)
Movie Recording: Remaining
recording time
7Image sizeEX-Z30
2048
1536 pixels
2048
1360 (3:2) pixels
1600
1200 pixels
1280
960 pixels
640
480 pixels
Movie Recording: recording
time
EX-Z40
2304
1728 pixels
2304
1536 (3:2) pixels
1600
1200 pixels
1280
960 pixels
640
480 pixels
Movie Recording: recording
time
2 1
1Flash Mode indicatorNone AutoFlash OffFlash OnRed-eye reduction
If the camera detects that flash is
required while auto flash is selected, the
flash on indicator will appear when the
shutter release button is pressed half
way.
Downloaded From camera-usermanual.com Casio Manuals 
						

							GETTING READY
23
E
F
G
D
H
DDigital zoom indicator
EShutter speed valueAn out of range aperture or shutter speed
causes the corresponding monitor screen
value to turn amber.
FAperture value
GISO sensitivity
HZoom indicatorLeft side indicates optical zoom.
Right side indicates digital zoom.
Downloaded From camera-usermanual.com Casio Manuals 
						

							GETTING READY
24
PLAY mode
5QualityFINE
NORMAL
ECONOMY
6Built-in memory selected for data
storage.
Memory card selected for data storage.
7Date and time
8Battery capacity
 IMPORTANT! 
Some information may not
display properly if you display an
image that was recorded using a
different digital camera model.
12
4
5
63
7
8
1PLAY mode file typeSnapshotMovieSnapshot AudioVoice Recording
2Image protection indicator
3Folder number/File number
4Image sizeEX-Z30
2048
1536 pixels
2048
1360 (3:2) pixels
1600
1200 pixels
1280
960 pixels
640
480 pixels
Movie Playback: Elapsed play time
EX-Z40
2304
1728 pixels
2304
1536 (3:2) pixels
1600
1200 pixels
1280
960 pixels
640
480 pixels
Movie Playback: Elapsed play time
Downloaded From camera-usermanual.com Casio Manuals 
						

							GETTING READY
25
Indicators
on
(page 22)Histogram
on
(page 84)Indicators
offMonitor
screen off
Changing the Contents of the Monitor
Screen
Each press of the [DISP] button changes the contents of
the monitor screen as shown below.
 IMPORTANT! 
You cannot turn off the monitor screen in the
following cases:
In the PLAY mode, in the BESTSHOT mode, when
not recording in the Movie mode.
You cannot use the [DISP] button to change the
contents of the monitor screen while a movie is being
recorded, or while standing by for or performing
audio recording.
In the Voice Recording mode, you can only turn
indicators on and off.
Indicator Lamps
You can find out the operational status of the camera and
the USB cradle at a glance by checking the color of the
indicator lamps, and whether a lamp is lit or flashing. For
details, see “Indicator Lamp Reference” on page 185.
Self-timer lampGreen operation lamp
[USB] lamp
[CHARGE] lamp
Red operation lamp
Downloaded From camera-usermanual.com Casio Manuals 
						

							GETTING READY
26
Attaching the Strap
Attach the strap to the strap ring as shown in the
illustration.
 IMPORTANT! 
Be sure to keep the strap around your wrist when
using the camera to protect against accidentally
dropping it.
The supplied strap is intended for use with this
camera only. Do not use it for any other purpose.
Never swing the camera around by the strap.
Power Requirements
Your camera is powered by a rechargeable lithium ion
battery (NP-40).
To load the battery
1.While pressing the battery compartment
cover on the bottom of the camera, slide the
cover in the direction indicated by the arrow,
and then swing it open.
Downloaded From camera-usermanual.com Casio Manuals 
						

							GETTING READY
27
2.While pulling the stopper in the direction
indicated by the arrow in the illustration, align
the (–) mark on the battery with the (–) mark
on the camera and slide the battery into the
camera.
(–) marks
NP-40 Stopper
3.Swing the battery compartment cover closed,
and then slide it in the direction indicated by
the arrow.
 IMPORTANT! 
Use only the special NP-40 rechargeable lithium ion
battery to power this camera. Use of any other type
of battery is not supported.
The battery is not charged when you purchase the
camera. You need to charge the battery before using
the camera for the first time (page 28).
Push the bottom of the battery, and make sure that
the stopper securely locks the battery in place.
(–) mark
Downloaded From camera-usermanual.com Casio Manuals 
						

							GETTING READY
28
To charge the battery
1.Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.
Note that the shape of the AC adaptor depends on
the area where you purchased the camera.
AC Adaptor
[DC IN 5.3V]USB Cradle
AC power cord
To remove the battery
1.Open the battery compartment cover.
2.Pull the stopper in the direction indicated by
the arrow.
This will cause the battery to come part way out of
the slot.
Stopper
3.Release the stopper and pull the battery from
the camera.
Take care so you do not drop the battery.
Downloaded From camera-usermanual.com Casio Manuals 
						

							GETTING READY
29
2.Turn off the camera.
3.Set the camera onto
the USB cradle.
Do not place the
camera onto the USB
cradle while it is turned
on.
The [CHARGE] lamp
on the USB cradle
should turn red,
indicating that charging
has started. When
charging is complete,
the [CHARGE] lamp
will turn green.
4.After charging is complete, remove the
camera from the USB cradle.
[CHARGE] lamp
 NOTE 
The bundled AC adaptor is designed for operation
with any power supply in the range of 100V to 240V
AC. Note, however, that the shape of the AC power
cord plug varies according to country or geographic
area. If you plan to use the AC adaptor in a
geographic area where the power receptacle shape
is different from that in your area, replace the AC
power cord with one of the other ones that comes
with the camera, or purchase a commercially
available AC power cord that is compatible with the
power outlets in that area.
 NOTE 
The AC adaptor is designed for operation on power
ranging from 100V AC to 240V AC. Note, however,
that the shape of the power cord plug varies
according to country or geographic area. It is up to
you to find out if the shape of the AC adaptor power
cord plug is compatible with local power outlets when
traveling abroad.
aaaaaaaaaaaaaaaaaaaaaaaaaaa
AC Adaptor
[DC IN 5.3V]
USB Cradle
Downloaded From camera-usermanual.com Casio Manuals 
						

							GETTING READY
30
If the [CHARGE] lamp starts flashing red, it means
that an error occurs while charging. An error can be
caused by any of the following: a problem with the
USB cradle, a problem with the camera, or a problem
with the battery or how it is loaded. Remove the
camera from the USB cradle and see if it works
normally.
You can use the USB cradle to charge the camera’s
battery, to exchange data with a computer over a
USB connection, or when using the Photo Stand
feature only. IMPORTANT! 
It takes about 190 minutes to achieve a full charge.
Actual charging time depends on current battery
capacity and charging conditions.
Use only the USB cradle (CA-24) that comes with the
camera or the optionally available rapid charger unit
(BC-30L) to charge the special NP-40 rechargeable
lithium ion battery. Never use any other charging
device.
Use only the bundled AC adaptor. Never use any
other type of AC adaptor. Do not use optionally
available AD-C40, AD-C620 and AD-C630 AC
adaptors with this camera.
Make sure that the camera connector of the USB
cradle is securely inserted into the camera’s
connector as far as it will go.
The [CHARGE] lamp may remain amber colored and
the charge operation may not start right away if you
try to charge immediately after using the camera
(which causes battery to become warm) or when it is
too hot or too cold where you are performing the
charge operation. If this happens, simply wait until
the battery reaches normal temperature. The
[CHARGE] lamp will turn red and charging will start
when the battery temperature returns to the
allowable charging temperature range.
Downloaded From camera-usermanual.com Casio Manuals