Casio Exilim EX Z30 User Manual

							101
PLAYBACK
Selecting a Specific Image in the 9-
image View
1.Display the 9-image view.
2.Use [], [], [], and
[
] to move the
selection boundary
up, down, left, or right
until it is located at
the image you want to
view.
3.Pressing any button
besides [], [], [],
or [
] displays the
selected image.
• This displays the full-
size version of the
image you selected.
Selection boundary
Month/Year
Date selection cursor
Displaying the Calendar Screen
Use the following procedure to display a 1-month calendar.
While the calendar is on the display, you can select a date,
which displays the first image recorded on that date. This
helps to make it easy to find the images you want.
1.In the PLAY mode, press [] ( ).
2.Use [], [], [], and
[
] to move the date
selection cursor.
• Use the procedure
under “Changing the
Date Format” on page
129 to specify the date
format.
• The image displayed on
the calendar for each
date is the first image
that was recorded on
that date.
Downloaded From camera-usermanual.com Casio Manuals 
						

							102
PLAYBACK
• Pressing [] while the date selection cursor is
located anywhere in the top line of the calendar
causes the previous month to appear.
• Pressing [] while the date selection cursor is
located anywhere in the bottom line of the calendar
causes the next month to appear.
• To exit the calendar screen, press [MENU] or [DISP].
•
 is displayed in the calendar screen to indicate
voice recording file images (page 111).
•
 appears in place of the image when the date
contains data that cannot be displayed by this
camera.
3.To view the large version of a date’s image,
move the date selection cursor to the date
and then press [SET].
• This displays the first image that was recorded on
the selected date.
Playing a Slide Show
Slide Show automatically plays back images in sequence
at a fixed interval.
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Slideshow”,
and then press [
].
Downloaded From camera-usermanual.com Casio Manuals 
						

							103
PLAYBACK
4.Use [] and [] to select “Start”, and then
press [SET].
• This starts the slide show.
5.To stop Slide Show, press [SET].
• The slideshow will also stop automatically after the
amount of time you specified for “Time” elapses.
3.Configure the slideshow settings.
• See the pages indicated below for more information.
For information aboutconfiguring this setting:
Images
Time
Interval
CancelGo here:
“To specify the slideshowimages” on page 104
“To specify the slideshow
time” on page 105
“To set the slideshow
interval” on page 105
To exit the slideshow
setting screen and cancel
the slideshow, use []
and [] to select “Cancel”
and then press [SET].
 IMPORTANT! 
• Note that all buttons are disabled while an image
change is in progress. Wait until an image is stopped
on the monitor screen before performing a button
operation, or hold down the button until the image
stops.
• When the slideshow comes to a movie file, it plays
the movie once and advances to the next file.
• When the slideshow comes to an audio snapshot or
voice recording file, it plays the audio once and then
advances to the next file.
• While audio is playing, you can use [] and [] to
adjust the volume level.
• Images copied from another digital camera or a
computer may take longer time to appear than the
slideshow interval time you specify.
• If there are indicators on the display, you can clear
them by pressing [DISP] (page 25).
Downloaded From camera-usermanual.com Casio Manuals 
						

							104
PLAYBACK
To specify the slideshow images
1.Use [] and [] to select “Images”, and then
press [
].
2.Use [] and [] to select the setting you
want, and then press [SET].
3.Use [] and [] to select “Start”, and then
press [SET].
• This starts the slideshow.
• The audio of audio snapshot and voice recording
files is also played back.
To do this:
Include all files in file memory in the
slideshow
Display a single file
Include all files in the FAVORITE
folder (page  116) in the slideshow
Select this setting:
All images
One Image
Favorites

Selecting a Particular Image for a Slideshow
When you select “One image” as the slideshow type, the
slide show displays only one image, without changing it.
Use this setting when you want a particular image to
remain on the display while the camera is on the USB
cradle (Photo Stand feature).
1.Select “One image”, and then press [
].
2.Use [] and [
] to scroll through the images
until the one you want to use is on the
monitor screen.
3.Press [SET] to
register your
selection and return
to the menu screen.
• Pressing [MENU]
instead of [SET] returns
to the menu screen
without registering the
setting.
Downloaded From camera-usermanual.com Casio Manuals 
						

							105
PLAYBACK
To specify the slideshow time
1.Use [] and [] to select “Time”.
2.Use [] and [
] to specify the time setting
you want, and then press [SET].
• You can specify a time in the range of 1 to 60
minutes.
3.Use [] and [] to select “Start”, and then
press [SET].
• This starts the slideshow.
To set the slideshow interval
1.Use [] and [] to select “Interval”.
2.Use [] and [
] to specify the interval setting
you want, and then press [SET].
• You can specify “MAX”, or a value in the range of 1
to 30 seconds as the interval.
• When “MAX” is selected for the interval, only the first
frame of movie files is played.
3.Use [] and [] to select “Start”, and then
press [SET].
• This starts the slideshow.
Downloaded From camera-usermanual.com Casio Manuals 
						

							106
PLAYBACK
Using the Photo Stand Feature
The “Photo Stand” feature lets you specify what should
appear on the camera’s monitor screen while the camera is
on its USB cradle. You can play a Photo Stand slideshow
without worrying about remaining battery power, or you can
specify display of a particular image. Photo Stand feature
operations are performed in accordance with slideshow
setting. See page 104 for information about configuring
slideshow settings to suit your needs.
1.Set the camera onto the USB cradle.
• Do not place the camera onto the USB cradle while it
is turned on.
2.Press the USB cradle’s
[PHOTO] button.
• This starts the Photo
Stand slideshow with the
images or image you
specified under “To
specify the slideshow
images” (page 104).
• Pressing [MENU] displays a screen for configuring
slideshow settings. To restart the slideshow, press
[MENU] while the menu screen is displayed, or
select “Start” and then press [SET].
• While audio is playing, you can use [] and [] to
adjust the volume level.
[PHOTO]
3.To stop the Phot Stand slideshow, press
[PHOTO] again.
 IMPORTANT! 
• The battery is not charged while a Photo Stand
slideshow is in progress. To charge the battery, stop
the slideshow.
Downloaded From camera-usermanual.com Casio Manuals 
						

							107
PLAYBACK
4.Use [] and [] to
select “Rotate”, and
then press [SET].
• Each press of [SET]
rotates the image 90
degrees.
5.After you are finished configuring settings,
press the [MENU] button to exit the setting
screen.
 IMPORTANT! 
• You cannot rotate an image that is protected. To
rotate such an image, first unprotect it.
• You may not be able to rotate a digital image that
was recorded with another type of digital camera.
• You cannot rotate movie or voice record images.
Rotating the Display Image
Use the following procedure to rotate the image 90 degrees
and register the rotation information along with the image.
After you do this, the image is always displayed in its
rotated orientation.
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Rotation”, and
then press [
].
3.Use [] and [
] to scroll through images until
the one you want to rotate is on the monitor
screen.
Downloaded From camera-usermanual.com Casio Manuals 
						

							108
PLAYBACK
Using Image Roulette
Image Roulette cycles images like a slot machine on the
display, before stopping at one of them. When you start an
Image Roulette operation, images scroll randomly on the
screen. At first, images scroll at high speed. Then the
scrolling gradually slows down until a single image is
stopped on the screen. The image that finally appears is
random, and subject to no rules or system.
1.While the camera is turned off, hold down []
as you press [
] (PLAY) to turn it on.
• Keep [] held down until images appear on the
monitor screen.
• This starts the Image Roulette operation, scrolling
images on the display, finally stopping at one.
2.Press [] or [
] to restart the Image Roulette
operation.
3.To turn off Image Roulette, press [] (REC)
to enter the REC mode or press the power
button to turn off the camera.
 IMPORTANT! 
• Image Roulette does not play movie files or display
voice recording images.
• Image Roulette is disabled when there is only one
snapshot image available.
• Note that Image Roulette works only with images
recorded with this camera. Image Roulette may not
operate properly when other types of images are in
memory.
• If you do not start another Image Roulette operation
for about one minute after the final image appears,
the camera enters its normal PLAY mode.
• You can use Image Roulette while “Power On” or
“Power On/Off” is selected for the “REC/PLAY”
setting (page 133).
Downloaded From camera-usermanual.com Casio Manuals 
						

							109
PLAYBACK
Adding Audio to a Snapshot
The “after-recording” feature lets you add audio to
snapshots after they are recorded. You can also re-record
an audio image (one with a 
 icon on it).
• Audio Format: WAVE/ADPCM recording format
This is the Windows standard format for audio recording.
The file extension of a WAVE/ADPCM file is “.WAV”.
• Recording Time:
Up to about 30 seconds per image
• Audio File Size:
Approximately 120KB (30-second recording of
approximately 4KB per second)
1.In the PLAY mode, use [] and [
] to scroll
through snapshots until the one to which you
want to add audio is displayed.
2.Press [MENU].
3.Select the “PLAY”
tab, select “Dubbing”,
and then press [
].
4.Press the shutter release button to start audio
recording.
5.Recording stops after about 30 seconds or
when you press the shutter release button.
Downloaded From camera-usermanual.com Casio Manuals 
						

							110
PLAYBACK
To re-record audio
1.In the PLAY mode, use [] and [
] to scroll
through snapshots until the one whose audio
you want to re-record is displayed.
2.Select the “PLAY” tab, select “Dubbing”, and
then press [
].
3.Use [] and [] to select “Delete”, and then
press [SET].
• If you merely want to delete the audio with re-
recording, press [MENU] here to complete the
procedure.
4.Press the shutter release button to start audio
recording.
5.Recording stops after about 30 seconds or
when you press the shutter release button.
• This deletes the previous recording and replaces it
with a new one.
 IMPORTANT! 
• Keep the microphone
on the front of the
camera pointed at the
subject.
• Take care that you do
not block the
microphone with your
fingers.
• Good recording results
are not possible when
the camera is too far
from the subject.
• Operating camera buttons during recording can
cause button noise to be included in the audio.
• The 
 (Audio) icon appears on the monitor screen
after audio recording is complete.
• You will not be able to record audio when remaining
memory capacity is low.
• The following types of audio recording are not
supported.
— Adding audio to a movie image
— Adding audio to a protected snapshot (page 115)
• Audio that is re-recorded or deleted cannot be
recovered. Make sure you no longer need audio
before re-recording or deleting it.
Microphone
Downloaded From camera-usermanual.com Casio Manuals