Casio Exilim EX Z30 User Manual

							91
OTHER RECORDING FUNCTIONS
1.In the REC mode, press [MENU].
2.Select the “Memory” tab, select the item you
want to change, and then press [].
3.Use [
] and [] to select the setting you
want, and then press [SET].
To do this:
Turn on mode memory so settings
are restored at power on
Turn off mode memory so settings
are initialized at power on
Select this setting:
On
Off
 IMPORTANT! 
• Note that BESTSHOT mode settings take priority
over mode memory settings. If you turn the camera
off while in the BESTSHOT mode, all settings except
for “REC Mode” and “Zoom Position” will be
configured according to the BESTSHOT sample
scene when you turn it back on again, regardless of
mode memory on/off setting.
• If you turn the camera off while in the Movie mode,
the flash will be turned off when you turn the camera
back on again, regardless of mode memory on/off
setting.
Resetting the Camera
Use the following procedure to reset all of the camera’s
settings to their initial defaults as shown under “Menu
Reference” on page 183.
1.In the REC mode or the PLAY mode, press
[MENU].
2.Select the “Set Up” tab, select “Reset”, and
then press [].
3.Use [
] and [] to select “Reset”, and then
press [SET].
• To cancel the procedure without resetting, select
“Cancel” and press [SET].
Downloaded From camera-usermanual.com Casio Manuals 
						

							92
PLAYBACKPLAYBACK
2.Use [
] (forward) or [] (back) to scroll
through files on the monitor screen.
 NOTES 
• Holding down [] or [
] scrolls images at high
speed.
• In order to allow for faster playback image scrolling,
the image that initially appears on the monitor screen
is a preview image, which is of somewhat lower
quality than the actual display image. The actual
display image appears a short while after the preview
image. This does not apply to images copied from
another digital camera.
You can use the camera’s built-in monitor screen to view
images after you record them.
Basic Playback Operation
Use the following procedure to scroll through files stored in
the camera’s memory.
1.Press [] (PLAY) to
turn on the camera.
• This enters the PLAY
mode.
• This causes an image
or a message to appear
on the monitor screen.
[]
Downloaded From camera-usermanual.com Casio Manuals 
						

							93
PLAYBACK
Playing an Audio Snapshot
Perform the steps below to display an audio snapshot
(indicated by a  indicator) and play its audio.
1.In the PLAY mode, use [] and [
] until the
image you want is displayed.
2.Press [SET].
• This plays back the
audio that accompanies
the displayed image.
• You can perform the
following operations
while audio is playing.
 IMPORTANT! 
• Audio volume can be adjusted only when playback is
being performed or is paused.
To do this:
Fast forward or fast reverse
the audio
Pause and unpause audio
playback
Adjust audio volume
Cancel playback
Do this:
Hold down [] or [
].
Press [SET].
Press [] or [].
Press [MENU].
Downloaded From camera-usermanual.com Casio Manuals 
						

							94
PLAYBACK
[SET]
Shutter release button
Flipping the Display
The following procedure flips the image 180 degrees. This
comes in handy when you want to show someone standing
in front of you an image on the monitor screen.
1.In the PLAY mode, use [] and [
] to scroll
through images on the monitor screen and
display the one you want.
2.While holding down the shutter release
button, press [SET].
• This flips the image 180 degrees. The histogram or
any other display information you had displayed is
cleared automatically whenever you flip the image.
• While an image is flipped, you can use [] and [
] to
scroll to another image, if you want.
3.To return the image to its normal orientation,
press any button other than [], [], [], or
[
].
 IMPORTANT! 
• Note that you cannot play a movie, or a voice
recording file on the monitor screen while a flipped
image is displayed.
• You cannot use the above procedure to flip an image
while a zoomed image, 9-image screen, calendar
screen image, a movie image, an audio snapshot, or
a voice recording file image is on the display.
Downloaded From camera-usermanual.com Casio Manuals 
						

							95
PLAYBACK
Zooming the Display Image
Perform the following procedure to zoom the image
currently on the monitor screen up to four times its normal
size.
1.In the PLAY mode, use [] and [
] to display
the image you want.
2.Press the zoom
button (
) to enlarge
the image.
• This displays an
indicator that shows the
current zoom factor.
• You can toggle between
the zoomed image and
normal image by
pressing [MENU].
Current zoom factor
3.Use [], [], [], and [
] to shift the image
up, down, left, or right.
4.Press [MENU] to return the image to its
original size.
 IMPORTANT! 
• You cannot enlarge a movie image.
• Depending on the original size of the recorded
image, you may not be able to zoom a display image
the full four times its normal size.
Downloaded From camera-usermanual.com Casio Manuals 
						

							96
PLAYBACK
Resizing an Image
You can use the following procedure to change a snapshot
image to either SXGA size (1280 x 960 pixels) or VGA size
(640 x 480 pixels).
• VGA is the optimum image size for attachment to e-mail
messages or incorporation into Web pages.
1.In the PLAY mode, press [MENU].
2.Select the “PLAY”
tab, select “Resize”,
and then press [
].
3.Use [] and [
] to scroll through images and
display the one you want to resize.
4.Use [] and [] to select the setting you
want, and then press [SET].
To do this:
Resize to 1280 x 960 pixels (SXGA)
Resize to 640 x 480 pixels (VGA)
Cancel the resizing operation
Select this:
1280 x 960
640 x 480
Cancel
Downloaded From camera-usermanual.com Casio Manuals 
						

							97
PLAYBACK
Cropping an Image
Use the following procedure when you want to crop a
portion of an enlarged image and use the remaining part of
the image as an e-mail attachment, Web page image, etc.
1.In the PLAY mode, use [] and [
] to scroll
through images and display the one you want
to crop.
2.Press [MENU].
3.Select the “PLAY”
tab, select
“Trimming”, and then
press [
].
• This causes a cropping
boundary to appear.
4.Use the zoom button ( ) to make the
cropping boundary larger or smaller.
• The size of the cropping boundary depends on the
size of the image on the display.
 IMPORTANT! 
• Resizing an image creates a new file that contains
the image in the size you select. The file with the
original image also remains in memory.
• Images smaller than 640 x 480 pixels cannot be
resized.
• An image recorded using the 2048 x 1360 (3:2) pixel
size (EX-Z30) and the 2304 x 1536 (3:2) pixel size
(EX-Z40) cannot be resized.
• Note that you can resize snapshots recorded with
this camera only.
• If the message “This function is not supported for this
file.” appears, it means that the current image cannot
be resized.
• The resize operation cannot be performed if there is
not enough memory to store the resized image.
• When you display a resized image on the camera’s
monitor screen, the date and time indicates when the
image was originally recorded, not when the image
was resized.
Downloaded From camera-usermanual.com Casio Manuals 
						

							98
PLAYBACK
 IMPORTANT! 
• Cropping an image creates a new file that contains
the cropped image. The file with the original image
also remains in memory.
• An image recorded using the 2048 x 1360 (3:2) pixel
size (EX-Z30) and the 2304 x 1536 (3:2) pixel size
(EX-Z40) cannot be cropped.
• Movie and voice recording file images cannot be
cropped.
• An image recorded using another camera model
cannot be cropped.
• If the message “This function is not supported for this
file.” appears, it means that the current image cannot
be cropped.
• The cropping operation cannot be performed if there
is not enough memory to store the cropped image.
• When you display a trimmed image on the camera’s
monitor screen, the date and time indicates when the
image was originally recorded, not when the image
was trimmed.
5.Use [], [], [], and [
] to move the
cropping boundary up, down, left, or right
until the area of the image you want to extract
is within the boundary.
6.Press [SET] to extract the part of the image
enclosed in the cropping boundary.
• If you want to cancel the procedure at any point,
press [MENU].
Downloaded From camera-usermanual.com Casio Manuals 
						

							99
PLAYBACK
Playing a Movie
Use the following procedure to play back a movie that was
recorded in the movie mode.
1.In the PLAY mode,
press [] and [
] to
scroll through images
until the movie you
want to play is
displayed.
2.Press [SET].
• This start playback of the movie.
• You can perform the following operations while a
movie is playing.
Movie icon
 IMPORTANT! 
• You cannot repeat play a movie. To play a movie
more than once, repeat the steps of the above
procedure.
• This camera can also play back audio recordings.
Note the following points when playing back audio.
— Audio volume can be adjusted only when
playback is being performed or is paused.
To do this:
Fast forward or fast reverse the
movie
Pause and unpause movie playback
Skip forward or back one frame
while paused
Cancel playback
Adjust audio volume
Do this:
Hold down []
or [
].
Press [SET].
Press [] or [
].
Press [MENU].
Press [] or [].
Downloaded From camera-usermanual.com Casio Manuals 
						

							100
PLAYBACK
Displaying the 9-image View
The following procedure displays nine images on the
monitor screen at the same time.
1.In the PLAY mode, press the zoom button
(
).
• This displays the 9-image screen with the image that
was on the monitor screen in step 2 in the center,
with a selection boundary around it.
•
 is displayed in the 9-image screen to indicate
voice recording file images (page 111).
• When there are nine or fewer images, they are
displayed in order with Image 1 in the upper left
corner, with the selection boundary around it.
2.Use [], [], [], and [
] to move the
selection boundary to the image you want.
Pressing [
] while the selection boundary is
in the right column or [] while it is in the left
column scrolls to the next full screen of nine
images.
3.Pressing any button besides [], [], [], or
[
] displays the full-size version of the image
where the selection boundary is located.
23 17 18 19
20 1 2 
345678
91011
12 13 1415 16 17
18 19 20
1
Example: When there are 20 images in memory, and
Image 1 is displayed first
Downloaded From camera-usermanual.com Casio Manuals