Casio Exilim EX H5 User Manual

							61Using BEST SHOT
You can use this procedure to shoot a portrait and then print it out in the following 
standard ID photo sizes: 30x24mm, 40x30mm, 45x35mm, 50x40mm, 55x45mm.
1.On the BEST SHOT scene menu, select the “ID Photo” scene.
2.Press the shutter button to shoot a portrait of the person for whom you 
want to create an ID photo.
3.Adjust the position of the face in the image.
4.Press [SET].
This saves the image in memory.
• The resulting image is always saved as a 5M (2560x1920 pixels) size image, 
regardless of the camera’s image size setting.
Printing an ID Photo
The print operation outputs multiple copies of the same image on the same sheet in 
various standard ID photo sizes. Cut out the image(s) you need.
• Actual prints are slightly larger than the standard ID photo sizes to facilitate 
trimming.
• When printing an ID photo, be sure to select “4
x6” as the paper size (page 109).
• When printing an ID photo, be sure to set up your printer for “borderless print”. For 
full details, see the user documentation that comes with your printer.
Shooting ID Photographs
[8] [2] [4] [6] : Moves the portrait up, down, left, and right.
Zoom controller : Zooms the portrait in and out.
Head line
Oval boundary
Chin line
Downloaded From camera-usermanual.com Casio Manuals 
						

							62Using BEST SHOT
1.On the BEST SHOT scene menu, select the “Business cards and 
documents” or “White board, etc.” scene.
2.Press the shutter button to shoot the image.
This image will appear on the monitor screen with a red 
boundary around the area that is selected for keystone 
correction. If there is a black boundary, it means that 
the camera detected more than one area that could be 
keystone corrected. Use [
4] and [6] to move the 
boundary to the area you want to keystone correct.
• The message “Cannot correct image!” will appear on the monitor screen if 
there are no areas that need to be keystone corrected, and the image will be 
saved to memory as it is.
3.Use [8] and [2] to select “Correct” and then press [SET].
This will correct the image and save the resulting (corrected) image.
Shooting Images of Business Cards and Documents
A process called “keystone 
correction” makes lines straight and 
natural, even if rectangular subjects 
are shot from an angle.
Before keystone 
correctionAfter keystone 
correction
BEST SHOT has two scenes.
Business cards and 
documentsWhite board, etc.
Downloaded From camera-usermanual.com Casio Manuals 
						

							63Using BEST SHOT
NOTE
• When composing an image like the ones shown above, make sure that the entire 
outline of the object you are trying to shoot is enclosed within the monitor screen.
• Make sure the object is against a background that allows its outline to stand out.
• VGA size images are stored as VGA size images. All other size images are stored 
as 2M (1600
x1200 pixels) images.
• Digital zoom is disabled while shooting with the “White board, etc.” and “Business 
cards and documents” scenes. However, you can use optical zoom (page 50).
With this feature, you can shoot your own self-portrait simply by pointing the camera 
at your face.
BEST SHOT has two self-portrait scenes from which to choose.
1.On the BEST SHOT scene menu, select “Self-portrait (1 person)” or 
“Self-portrait (2 people)”.
2.Press the shutter button all the way down, and point 
the camera at yourself.
About three seconds after you press the shutter button, the 
camera will go into Auto Shutter standby and start face 
detection. The camera will go into Auto Shutter standby 
and detect the faces of any people in the image.
When the camera is able to detect the number of required 
individuals, it will release the shutter automatically when it determines there is no 
image blur.
• The camera will emit a shutter sound and the front lamp will flash twice when 
the shutter is released.
• To cancel Auto Shutter standby, press [SET].
Recording a Self-portrait
• Self-portrait (1 person) :  Shoots when the face of at least one person, including 
you, is detected.
• Self-portrait (2 people) :  Shoots when the faces of at least two people, including 
you, are detected.
Downloaded From camera-usermanual.com Casio Manuals 
						

							64Using BEST SHOT
NOTE
• To shoot with the self-portrait feature in combination with a continuous shutter (CS) 
mode (page 43), turn off the Make-up Mode (page 48). Operation is the same as 
that when a continuous shutter (CS) mode is used in combination with Auto 
Shutter. See page 72 for more information.
IMPORTANT!
• If the camera remains in Auto Shutter standby without releasing the shutter, you 
can record an image by pressing the shutter button all the way down again.
• Shooting with the self-portrait feature may produce a blurred image when shooting 
in areas where lighting is dim, which results in a very slow shutter speed setting.
• The Auto Power Off (page 140) trigger time is fixed at five minutes while the 
camera is in Auto Shutter standby. Sleep (page 139) is disabled while Auto Shutter 
is being used.
Multi-motion Image can be used to isolate a moving subject 
within a series of multiple images and places them against 
a stationary background. Make sure that the camera is not 
moving or shaking when shooting with Multi-motion Image.
1.On the BEST SHOT scene menu, select the 
“Multi-motion Image” scene.
2.Press the shutter button to start shooting.
Continuous Shutter shooting will stop after some time, and the resulting 
composite image will appear on the monitor screen.
• Keep the camera still until all of the continuous shutter images are recorded.
• When using this feature, image size is fixed at 3M (2048
x1536 pixels).
Isolating Moving Subjects (Multi-motion Image)
Downloaded From camera-usermanual.com Casio Manuals 
						

							65Advanced Settings
Advanced Settings
The following are menu operations you can use to configure various camera settings.
• REC mode menu contents and operations are different from those in the PLAY 
mode. This section explains operations using the REC menu screen. See page 89 
for information about PLAY menu screen operations.
.Example REC Menu Screen Operation
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the second Control Panel 
option from the bottom (MENU) and then press 
[SET] (page 32).
This will display the REC menu screen.
3.Use [4] and [6] to select the tab where the menu 
item you want to configure is located.
4.Use [8] and [2] to select the menu item you 
want, and then press [6].
5.Use [8] and [2] to change the setting of the 
selected menu item.
6.After the setting is the way you want, press 
[SET] to apply the setting and return to the 
viewfinder screen.
• Pressing [4] instead of [SET] applies the 
selected setting and returns to the menu item 
selection.
• To configure settings on another tab after 
pressing [
4] to return to the menu item selection, 
use [8] or [ ] (Delete) to move the highlighting 
up to the tabs, and then use [4] and [6] to 
select the tab you want.
NOTE
• [ ] (Delete) provides a helpful way to navigate around tabs and menus.
– Pressing [ ] (Delete) while a tab is selected will display the viewfinder screen.
– Pressing [ ] (Delete) while menu item or setting is selected will “back step” in 
the following sequence: Settings 
* Menu items * Tab.
Using On-screen Menus
[SET] [8] [2] [4] [6]
Selected
menu item
Example:
When “Lighting” is 
selected on the “Quality” 
tab
Tabs
Settings
Downloaded From camera-usermanual.com Casio Manuals 
						

							66Advanced Settings
.REC Menu Operations in This Manual
REC menu operations are represented in this manual as shown below. The following 
operation is the same one described under “Example REC Menu Screen Operation” 
on page 65.
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * Lighting
Use [4] and [6] to select the 
“Quality” tab.
Use [
8] and [2] to select “Lighting” and 
then press [6]. Press [SET]. Press 
[r] (REC).
Use [8] and [2] to select the second Control Panel option from the 
bottom (MENU) and then press [SET].
Downloaded From camera-usermanual.com Casio Manuals 
						

							67Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * REC Tab * Continuous AF
When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is 
performed and focusing is continually updated until you half-press the shutter button.
• Before you half-press the shutter button, the camera focuses at the center of the 
screen. If “Face Detection” is turned on when you half-press the shutter button, 
focusing is performed in the area where a face is detected.
• Shooting with Continuous AF can cause vibration and noise to occur due to lens 
operation. This does not indicate malfunction.
Procedure
[r] (REC) * [SET] * MENU * REC Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject 
movement or camera movement when shooting a moving subject using telephoto, 
when shooting a fast-moving subject, or when shooting under dim lighting conditions.
Your digital camera is equipped with a CCD shift type camera shake correction 
feature and a high-sensitivity anti image blur feature. These two features work in 
concert to minimize the effects of hand and subject movement.
REC Mode Settings (REC)
Shooting with Continuous Auto Focus (Continuous AF)
Reducing the Effects of Camera and Subject Movement 
(Anti Shake)
 AutoMinimizes the effects of hand and subject movement.
 Camera ASMinimizes the effects of camera movement only.
 Image ASMinimizes the effects of subject movement only.
 DEMOHalf-pressing the shutter button demonstrates the effect of 
“A Camera AS”. However, the image is not recorded.
OffTurns off Anti Shake settings.
D
A
S
F
Downloaded From camera-usermanual.com Casio Manuals 
						

							68Advanced Settings
NOTE
• Only Camera Stabilizer can be used during movie recording.
• ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen 
when you half-press the shutter button while “D Auto” or “S Image AS” is 
selected. These values will appear briefly, however, in the preview image that is 
displayed immediately after you shoot a snapshot.
• The ISO sensitivity setting (page 78) must be “Auto” for “S Image AS” to work.
• Shooting while “D Auto” or “S Image AS” is selected can cause an image to 
appear somewhat coarser than normal and can cause slight deterioration of image 
resolution.
• Anti Shake may not be able to eliminate the effects of camera or subject movement 
when movement is severe.
•“A Camera AS” may not work properly when the camera is mounted on a tripod. 
Either turn off Anti Shake or select “S Image AS”.
Procedure
[r] (REC) * [SET] * MENU * REC Tab * Grid
The on-screen grid can be displayed on the REC mode 
monitor screen for easy vertical and horizontal alignment 
when composing images.
Procedure
[r] (REC) * [SET] * MENU * REC Tab * AF Assist Light
Half-pressing the shutter button while this setting is selected 
causes the front lamp to light, which provides illumination for 
focusing in areas where lighting is dim. Leaving this function 
turned off is recommended when shooting portraits from short 
distances, etc.
IMPORTANT!
• Never look directly into the front lamp while it is lit.
Displaying the On-screen Grid (Grid)
Using the Auto Focus Assist Light (AF Assist Light)
Front lamp
Downloaded From camera-usermanual.com Casio Manuals 
						

							69Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * REC Tab * Focus Frame
You can use this procedure to select from among five different shapes, including a 
heart shape, for the focus frame.
NOTE
• Half-pressing the shutter button will cause the focus frame to change one of the 
shapes shown below.
• While “Random” is selected, one of the four focus frames is selected randomly 
whenever the camera is turned on.
• When shooting with face detection, the frame shape is ß.
• On-screen grid (page 68) will not appear when “È
 Multi” is selected as the AF 
area (page 41) while any focus frame other than ß is selected with this setting.
Changing the Focus Frame Shape (Focus Frame)
Settingsß¹™¬μ
Random
Focus successful
Focus not successful
Downloaded From camera-usermanual.com Casio Manuals 
						

							70Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * REC Tab * Auto Shutter
With Auto Shutter, the camera releases the shutter automatically when it detects that 
certain conditions are present.
.To use Detect Blur to minimize image blur (Detect Blur)
1.Point the camera at the subject and half-press the shutter button. Wait 
until the camera adjusts exposure and focus automatically.
2.Press the shutter button the rest of the way 
down.
The camera will go into a standby mode and start 
detecting hand and subject movement. The camera will 
release the shutter automatically the moment it 
determines there is no image blur.
•“0 Auto” flashes on the monitor screen while 
detection of image blur due to hand movement or 
subject movement is in progress.
Using Auto Shutter (Auto Shutter)
 Detect BlurCamera releases the shutter automatically when it detects 
image blur to camera and subject movement are 
minimized.
 Detect PanningWhen panning, the camera releases the shutter 
automatically when it determines there is no blur in the 
subject being followed.
 Detect SmileCamera releases the shutter automatically when it detects 
the subject is smiling.
¸
¯
¨
Indicator:
The indicator color 
changes from red to 
green when the camera 
is getting ready to 
release the shutter.
Downloaded From camera-usermanual.com Casio Manuals