Casio Exilim EX H5 User Manual

							41Snapshot Tutorial
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the fourth Control Panel option from the top 
(AF Area).
3.Use [4] and [6] to select the setting you want and then press [SET].
4.Point the camera at the subject and half-press the shutter button. Wait 
until the camera adjusts exposure and focus automatically.
Specifying the Auto Focus Area (AF Area)
 IntelligentThe camera automatically determines the focus point on the 
screen and focuses there (intelligent AF).
• Face detection (page 47) operates automatically. 
 SpotThis mode takes readings of a small area in the center of the 
image. This setting works well with focus lock (page 40).
 MultiWhen you half-press the shutter button while this setting selected, 
the camera will select the optimum Auto Focus area from among 
nine possible areas. The focus frame of the area where the 
camera focuses will be displayed in green.
 TrackingHalf-pressing the shutter button focuses on the subject and causes 
the focus frame to track the movement of the subject.
Ò
Û
È
Ë
Downloaded From camera-usermanual.com Casio Manuals 
						

							42Snapshot Tutorial
5.Press the shutter button the rest of the way down.
IMPORTANT!
•“È Multi” cannot be selected for the Auto Focus area while you are using Face 
Detection (page 47).
•“Ë
 Tracking” cannot be selected for the Auto Focus area while you are using 
Auto Shutter (page 70).
• Selecting “Ë
 Tracking” can cause vibration and noise to occur due to lens 
operation while tracking a subject. This does not indicate malfunction.
“Û Spot” or “Ë Tracking”
“È Multi”Focus frame
Focus frame
“Ò Intelligent”
Focus frame
Downloaded From camera-usermanual.com Casio Manuals 
						

							43Snapshot Tutorial
Your camera has four continuous shutter modes.
• To turn off a continuous shutter mode, select “Off”.
*fps (frames per second) is a unit of measurement indicating the number of images 
recorded or played back per second.
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the fifth Control Panel option from the top 
(Continuous Shutter).
3.Use [4] and [6] to select the continuous shutter mode you want, and 
then press [SET].
4.Press the shutter button to shoot.
Images continue to be shot as long as you keep the shutter button depressed. 
Releasing the shutter button stops shooting.
Using Continuous Shutter (CS)
CS speedMaximum 
CS ShotsRecorded Image SizeFlash Mode
 CS: 
Normal 
Speed CSDepends on 
memory card 
capacityUntil 
memory 
fullAccording to image size 
settingAccording to 
flash mode 
setting
 CS: 4 fps4 images per 
second8 shots2M (1600x1200 pixels) 
fixedFlash Off
 CS: 10 fps10 images 
per second20 shots1M (1280x960 pixels) 
fixedFlash Off
 CS: Flash3 images per 
second3 shots2M (1600x1200 pixels) 
fixedFlash On
Z
Z
Z
C
B
Downloaded From camera-usermanual.com Casio Manuals 
						

							44Snapshot Tutorial
Specify the method to use for saving images recorded with the following continuous 
shutter (CS) modes.
CS: 4 fps/10 fps
1.After continuous shutter shooting is finished, use [8] and [2] to 
select the save method you want and then press [SET].
• Does not save any of the images while “Cancel Save” is selected.
Specifying the Method for Saving Continuous Shutter Images
Save Selected
The shot images are played back at slow speed so you can select the images 
you want to save.
1While the shot images are playing back and an image 
appears that you want to save, press the shutter 
button. Each image that you select by pressing the 
shutter button will have a mark appended to it.
2After selecting all of the images you want to save, 
press [0] (Movie).
3Use [8] and [2] to select the save method you want and then press [SET].
Save All
Saves all the images.
Mark
Buttons Used for Image Selection
[4] [6]During playback, changes the playback direction and playback 
speed.
While playback is paused, scrolls forward or back.
[SET]Toggles between pause and play.
Shutter 
buttonPress all the way down to select an image for saving.
[0] 
(Movie)Saves the selected images and exits the image select 
operation.
Save Selected : Saves selected images.
Save All : Saves all the images.
Cancel Save : Does not save any of the images.
Downloaded From camera-usermanual.com Casio Manuals 
						

							45Snapshot Tutorial
IMPORTANT!
• If there is not enough available capacity on the memory card, you may not be able 
to record the number of CS images indicated on the monitor screen. Make sure 
your memory card has sufficient remaining capacity before shooting with using 
continuous shutter.
• With continuous shutter, exposure and focus for the first image are applied for 
successive images as well.
• When using a continuous shutter mode, keep the camera still until shooting is 
finished.
• Continuous shutter cannot be used in combination with any of the following.
– Some BEST SHOT scenes
– Make-up Mode, Landscape Mode
• The speed of “CS: Normal Speed CS” depends on the type of memory card loaded 
in the camera and the amount of free space available for storage. When shooting 
to built-in memory, continuous shutter shooting is relatively slow.
• “CS: Normal Speed CS” speed is slower when shooting with flash.
• You cannot use the self-timer in combination with “CS: Normal Speed CS”, 
“CS: 4 fps”, “CS: 10 fps”.
• Note that images recorded with “CS: 4 fps”, “CS: 10 fps” and “CS: Flash” are of 
somewhat lower resolution and more prone to digital noise than images recorded 
with “CS: Normal Speed CS”.
• The ISO sensitivity setting always is “Auto” for “CS: 4 fps”, “CS: 10 fps” and 
“CS: Flash”, regardless of the camera’s current ISO sensitivity setting.
• The flash range for Flash CS is narrower than that for normal flash.
• Shooting a very bright subject can cause a vertical band or a pink cast on the 
monitor screen image. This does not indicate malfunction.
Downloaded From camera-usermanual.com Casio Manuals 
						

							46Snapshot Tutorial
With the Self-timer, pressing the shutter button starts a timer. The shutter is released 
and the image is shot after a fixed amount of time.
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the sixth Control Panel option from the top 
(Self-timer).
3.Use [4] and [6] to select the setting you want and then press [SET].
• The front lamp flashes while the Self-timer countdown is 
in progress.
• You can interrupt an ongoing Self-timer countdown by 
pressing [SET].
NOTE
• The Self-timer cannot be used together with the following features.
CS: Normal Speed CS/4fps/10fps, some BEST SHOT scenes
• The Triple Self-timer cannot be used together with the following features.
Auto Shutter, CS, Movie, Make-up Mode, Landscape Mode, some BEST SHOT 
scenes
Using the Self-timer (Self-timer)
 10sec 
Self-timer10-second Self-timer
 2sec 
Self-timer2-second Self-timer
• When shooting under conditions that slow down the shutter 
speed, you can use this setting to prevent image blur due to 
camera movement.
 X3 
Self-timer 
(Triple 
Self-timer)Shoots three images: one image 10 seconds after the shutter 
button is pressed, and the next two images as soon as the 
camera is ready after shooting the previous image. How long it 
takes for the camera to get ready to shoot depends on the 
image size and quality settings, whether or not a memory card 
is loaded in the camera, and the flash charge condition.
Self-timer OffTurns off the Self-timer.
„
‚
”
Front lamp
Downloaded From camera-usermanual.com Casio Manuals 
						

							47Snapshot Tutorial
When shooting people, the face detection feature detects the faces of up to ten 
individuals and adjusts focus and brightness accordingly.
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the third Control Panel option from the 
bottom (Face Detection).
3.Use [4] and [6] to select “G Face Detection: On” and then press 
[SET].
4.Point the camera at the subject(s).
The camera will detect human faces and display a 
frame around each one.
5.Half-press the shutter button.
The camera will focus and the frames around the 
faces it focuses on will turn green.
6.Press the shutter button the rest of the way 
down.
IMPORTANT!
• The camera performs center focus if it cannot detect a face.
• The only focus mode available while face detection is enabled is Auto Focus (AF).
• Face detection may take a bit longer when you hold the camera sideways.
• Detection of the following types of faces is not supported.
– Face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade
– A profile or a face that is at an angle
– A face that is very far away and small, or very close and large
– A face in an area that is very dark
– The face of a pet or some other non-human subject
• Face detection cannot be used in combination with any of the following features.
– Some BEST SHOT scenes
– Movie Recording
• The following function is disabled when shooting with face detection.
– Multi AF
Using Face Detection (Face Detection)
Face Detection icon
Downloaded From camera-usermanual.com Casio Manuals 
						

							48Snapshot Tutorial
The Make-up Mode smoothes the skin texture of the subject and softens facial 
shadows caused by harsh sunlight for better looking portraits.
1.In the REC mode, use [4] and [6] to display ± 
in the Control Panel, which enters the Make-up 
Mode.
•If ± does not appear in the Control Panel, press 
[4] or [6] many times until it appears. Each press of 
[4] or [6] will cycle the Control Panel option in the 
following sequence: Face Detection (page 47) * 
Make-up Mode * Landscape Mode (page 49).
2.Press [SET] and then use [8] and [2] to select the third Control Panel 
option from the bottom (Make-up Mode).
3.Use [4] and [6] to select “Make-up Level”, and then 
press [SET].
• You can set one of 13 levels in the range of “0 (Off)” (no correction) to “+12 
(Max.)” (maximum correction). The larger the value, the greater the processing 
that is performed.
4.Point the camera at the subject(s).
The camera will detect human faces and display a frame around each one.
5.Half-press the shutter button.
The camera will focus on the face, which will cause frames around it to turn 
green.
6.When you are ready to shoot, press the shutter button all the way 
down.
NOTE
• The following functions cannot be used together with the Make-up Mode.
Continuous Shutter, Triple Self-timer, Face Detection, Landscape Mode, some 
BEST SHOT scenes
Shooting with the Make-up Mode (Make-up)
Make-up icon
Downloaded From camera-usermanual.com Casio Manuals 
						

							49Snapshot Tutorial
The Landscape Mode makes colors more vivid, filters haze, and performs other 
processing that enhances the beauty of natural scenery.
1.In the REC mode, use [4] and [6] to display 
Ö in the Control Panel, which enters the 
Landscape Mode.
•If Ö does not appear in the Control Panel, press 
[4] or [6] many times until it appears. Each press 
of [4] or [6] will cycle the Control Panel option in 
the following sequence: Face Detection (page 47) 
* Make-up Mode (page 48) * Landscape 
Mode.
2.Press [SET] and then use [8] and [2] to select the third Control Panel 
option from the bottom (Landscape Mode).
3.Use [4] and [6] to select the Landscape Mode setting 
you want.
• Available level settings are “+1” (Weak) and “+2” (Strong).
4.When everything is the way you want, press [SET].
This will apply the effect you selected.
5.Point the camera at the scenery you want to record.
6.Press the shutter button to shoot.
NOTE
• The following functions are disabled while the camera is in the Landscape Mode.
Continuous Shutter, Triple Self-timer, Make-up Mode, Face Detection, Lighting, 
Color Filter, some BEST SHOT scenes
Shooting Beautiful Scenery Images (Landscape)
Vivid LandscapeEnhances colors to produce a clearer, more vivid 
landscape image.
Mist RemovalCorrects for misty and cloudy conditions for scenery 
images that appear as if they were shot on a clear day.
Landscape icon
Downloaded From camera-usermanual.com Casio Manuals 
						

							50Snapshot Tutorial
Your camera provides you with 10X optical zoom (that changes the lens focal 
distance), which can be used in combination with digital zoom (that digitally 
processes the center portion of the image to enlarge it) for total zoom capabilities of 
10X to 159.4X. The image deterioration point depends on the image size (page 51).
1.In the REC mode, slide the zoom controller to zoom.
2.Press the shutter button to shoot the image.
IMPORTANT!
• Digital zoom is disabled while date stamping (page 137) is turned on.
NOTE
• The higher the digital zoom factor, the coarser the recorded image. Note that the 
camera also has a function that lets you record using digital zoom without image 
deterioration (page 51).
• Use of a tripod is recommended to protect against image blur due to camera 
movement when shooting with telephoto.
• Performing a zoom operation changes the lens aperture.
• Digital zoom only is available during movie recording. You can adjust the optical 
zoom setting before you press [0] (Movie) to start movie recording.
Shooting with Zoom
w (Wide Angle) : Reduces the size of the subject and broadens the range.
z (Telephoto) : Enlarges the subject and narrows the range.
w Wide Anglez TelephotoZoom controller
Downloaded From camera-usermanual.com Casio Manuals