Casio Exilim EX H5 User Manual

81Viewing Snapshots and Movies
The Movie Editing feature lets you use one of the following procedures to edit out a 
specific part of a movie.
1.To pause movie playback, press [SET].
2.Press [2].
3.Use [8] and [2] to select the editing method you want to use and then 
press [SET].
4.Use [4] and [6] to scroll through the movie and 
search for the frame (point) from which or to 
which you want to cut the movie (the cut point).
• You also can search for the cut location by playing 
back the movie and...

82Viewing Snapshots and Movies
5.When the frame where you want the cut point to be is displayed, press 
[2].
6.Use [8] and [2] to select “Yes” and then press [SET].
The selected cut operation will take considerable time to complete. Don’t try to 
perform any camera operation until the “Busy... Please wait...” message 
disappears from the monitor screen. Note that a cut operation can take a long 
time if the movie being edited is long.
IMPORTANT!
• When you edit a movie, only the result is saved. The...

83Viewing Snapshots and Movies
Each time you perform a continuous shutter (CS) operation, the camera creates a CS 
group that includes all of the images for that particular CS session. You can use the 
following procedure to play back the images in a particular CS group.
1.Press [p] (PLAY) and then use [4] and [6] to display the CS group 
whose images you want to view.
2.Press [0] (Movie) to start playback the images in the CS group.
This will play back the images in the CS group you selected.
Playback...

84Viewing Snapshots and Movies
NOTE
• Multiple images shot using “CS: Normal Speed CS” are stored individually and are 
not grouped. This means they can be displayed individually (page 28) but not as a 
CS group.
You can delete CS images (1 image in CS group, selected images in CS group, 1 CS 
group) while playback is in progress or paused.
1.While CS image playback is in progress or paused, press [2] or [ ] 
(Delete).
2.Next, perform the same operations you would perform to delete normal 
(non-CS)...

85Viewing Snapshots and Movies
.Dividing Up All CS Groups
1.While a CS group is displayed, press [SET].
2.Use [8] and [2] to select the bottom PLAY Panel item (MENU) and 
then press [SET] (page 89).
3.Use [4] and [6] to select the “PLAY” tab.
4.Use [8] and [2] to select “Divide Group” and then press [6].
5.Use [8] and [2] to select “Divide All Groups” and then press [SET].
6.Use [8] and [2] to select “Yes”, and then press [SET].
• Once a CS group is divided, it cannot be regrouped.
Downloaded From...

86Viewing Snapshots and Movies
1.In the PLAY mode, use [4] and [6] to scroll through the images until 
the one you want is displayed.
2.Slide the zoom controller towards z ([) to 
zoom.
You can use [8], [2], [4], and [6] to scroll the 
zoomed image on the monitor screen. Slide the 
zoom controller towards w to unzoom the image.
– When monitor screen contents are turned on, a 
graphic in the lower right corner of the screen 
shows what part of the zoomed image is 
currently displayed.
– To exit the zoom...

87Viewing Snapshots and Movies
1.In the PLAY mode, slide the zoom controller towards w (]) twice.
This will display the calendar screen that shows the first image recorded on each 
day.
To display the first image recorded on a particular day, 
use [8], [2], [4], and [6] to move the selection 
boundary to the day you want and then press [SET].
To exit the calendar screen, press [p] (PLAY).
• If you save an image using any one of the following 
functions, the image will appear in the calendar on the 
date...

88Viewing Snapshots and Movies
2.Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is 
connected.
3.Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing 
on the camera’s monitor screen.
• Pressing [ON/OFF] (Power) or [r] (REC) will not turn on the camera while the 
AV cable is connected.
• You also can change the aspect ratio of the screen and the video output 
system...

89Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform 
other playback operations.
Pressing [SET] in the PLAY mode will display the PLAY Panel.
.Example PLAY Panel Operation
1.In the PLAY mode, press [SET].
The PLAY Panel will appear along the 
right side of the monitor screen.
2.Use [8] and [2] to select the 
PLAY Panel item you want, and 
then press [SET].
3.The following describes the operations you can...

90Other Playback Functions (PLAY)
.PLAY Menu Operations in This Manual
PLAY menu operations are represented in this manual as shown below. The following 
operation is the same one described under “Example PLAY Panel Operation” on 
page 89.
 MenuDisplays the PLAY menu. You can perform the following 
operations on the PLAY menu.
1Use [4] and [6] to select the tab 
where the menu item you want to 
configure is located.
2Use [8] and [2] to select the menu 
item you want, and then press [6].
3Use [8] and [2]...