Casio Exilim EX H5 User Manual

71Advanced Settings
.To use Detect Panning to minimize image blur (Detect Panning)
1.Point the camera at location where the subject will pass and then half-
press the shutter button to adjust exposure and focus.
2.Press the shutter button the rest of the way 
down.
This will put the camera into Auto Shutter standby. 
Move the camera to follow the movement of the 
subject. The camera will release the shutter 
automatically the moment it determines there is no blur 
in the subject you are following.
•“0...

72Advanced Settings
.To change Auto Shutter trigger sensitivity (Sensitivity)
1.Use [8] and [2] to select “Sensitivity” and then press [6].
2.Use [4] and [6] to select the sensitivity setting you want, and then 
press [SET].
• You can select any one of three sensitivity levels, from /.. (Lowest) to 
/// (Highest).
• With the /// (Highest) setting, the auto shutter release is triggered relatively 
easily. Auto shutter release triggering becomes more difficult with the /.. 
(Lowest) setting, but recorded...

73Advanced Settings
IMPORTANT!
• If the camera remains in Auto Shutter standby without releasing the shutter, you 
can record an image by pressing the shutter button all the way down again.
• Detect Blur and Detect Panning may not produce the desired effect when shooting 
in an area where dim lighting requires a slow shutter speed, or when the subject is 
moving extremely quickly.
• Since facial expressions differ from individual to individual, you may experience 
problems with getting the camera to...

74Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * REC Tab * Memory
When you turn off the camera, it remembers the current settings of all enabled 
memory items and restores them when you turn it back on. Any memory item that is 
disabled will be returned to its initial default setting whenever you turn off the camera.
*Optical zoom setting only.
• If you turn the camera power off and then back on while the BEST SHOT memory 
item is enabled, all of the other memory items (except for zoom position)...

75Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * T Quality (Snapshot)
• The “Fine” setting helps to bring out details when shooting a finely detailed image 
of nature that includes dense tree branches or leaves, or an image of a complex 
pattern.
• Memory capacity (the number of images you can record) will be affected by the 
quality settings you configure (page 166).
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * » Quality (Movie)
Movie image quality is a standard that...

76Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * EV Shift
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3 EV
1.Use [8] and [2] to adjust the exposure compensation value.
To cancel exposure compensation, change the EV value to 0.0.
2.Press [SET].
This applies the exposure compensation value. The exposure compensation 
value you set remains in effect until you change it or turn off the...

77Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * White Balance
You can adjust white balance to match the source of light available where you are 
shooting and avoid the blue cast that results when shooting outdoors when it is 
cloudy, and the green cast that results when shooting under fluorescent lighting.
• When “Auto” is selected for the white balance setting, the camera automatically 
determines the white point of the subject. Certain subject colors and light source 
conditions...

78Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * ISO
ISO sensitivity is a measure of sensitivity to light.
• “Auto” ISO sensitivity always is applied for movies, regardless of the current ISO 
sensitivity setting.
• Higher ISO sensitivity values tend to result in digital noise in images.
Specifying ISO Sensitivity (ISO)
AutoAdjusts sensitivity automatically according to conditions.
ISO 64Lower sensitivity
Higher sensitivitySlow shutter speed
Fast shutter speed (Set 
for shooting in...

79Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas 
when shooting images.
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * Color Filter
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple
Optimizing Image Brightness (Lighting)
ExtraPerforms a higher level of brightness correction than the “On” setting. 
When this option is selected, it takes longer for the image to be...

80Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 28 for the procedure for viewing snapshots.
1.Press [p] (PLAY) and then use [4] and [6] to display the movie you 
want to view.
2.Press [0] (Movie) to start 
playback.
Movie Playback Controls
• Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots
Viewing a Movie
Fast forward/
fast reverse[4] [6]
• Each press of either button increases the speed of the fast 
forward or fast reverse operation.
• To...