Casio Exilim EX H5 User Manual

61Using BEST SHOT
You can use this procedure to shoot a portrait and then print it out in the following 
standard ID photo sizes: 30x24mm, 40x30mm, 45x35mm, 50x40mm, 55x45mm.
1.On the BEST SHOT scene menu, select the “ID Photo” scene.
2.Press the shutter button to shoot a portrait of the person for whom you 
want to create an ID photo.
3.Adjust the position of the face in the image.
4.Press [SET].
This saves the image in memory.
• The resulting image is always saved as a 5M (2560x1920 pixels) size image,...

62Using BEST SHOT
1.On the BEST SHOT scene menu, select the “Business cards and 
documents” or “White board, etc.” scene.
2.Press the shutter button to shoot the image.
This image will appear on the monitor screen with a red 
boundary around the area that is selected for keystone 
correction. If there is a black boundary, it means that 
the camera detected more than one area that could be 
keystone corrected. Use [
4] and [6] to move the 
boundary to the area you want to keystone correct.
• The message...

63Using BEST SHOT
NOTE
• When composing an image like the ones shown above, make sure that the entire 
outline of the object you are trying to shoot is enclosed within the monitor screen.
• Make sure the object is against a background that allows its outline to stand out.
• VGA size images are stored as VGA size images. All other size images are stored 
as 2M (1600
x1200 pixels) images.
• Digital zoom is disabled while shooting with the “White board, etc.” and “Business 
cards and documents” scenes....

64Using BEST SHOT
NOTE
• To shoot with the self-portrait feature in combination with a continuous shutter (CS) 
mode (page 43), turn off the Make-up Mode (page 48). Operation is the same as 
that when a continuous shutter (CS) mode is used in combination with Auto 
Shutter. See page 72 for more information.
IMPORTANT!
• If the camera remains in Auto Shutter standby without releasing the shutter, you 
can record an image by pressing the shutter button all the way down again.
• Shooting with the...

65Advanced Settings
Advanced Settings
The following are menu operations you can use to configure various camera settings.
• REC mode menu contents and operations are different from those in the PLAY 
mode. This section explains operations using the REC menu screen. See page 89 
for information about PLAY menu screen operations.
.Example REC Menu Screen Operation
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the second Control Panel 
option from the bottom (MENU) and then press 
[SET] (page...

66Advanced Settings
.REC Menu Operations in This Manual
REC menu operations are represented in this manual as shown below. The following 
operation is the same one described under “Example REC Menu Screen Operation” 
on page 65.
Procedure
[r] (REC) * [SET] * MENU * Quality Tab * Lighting
Use [4] and [6] to select the 
“Quality” tab.
Use [
8] and [2] to select “Lighting” and 
then press [6]. Press [SET]. Press 
[r] (REC).
Use [8] and [2] to select the second Control Panel option from the 
bottom (MENU)...

67Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * REC Tab * Continuous AF
When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is 
performed and focusing is continually updated until you half-press the shutter button.
• Before you half-press the shutter button, the camera focuses at the center of the 
screen. If “Face Detection” is turned on when you half-press the shutter button, 
focusing is performed in the area where a face is detected.
• Shooting with Continuous AF...

68Advanced Settings
NOTE
• Only Camera Stabilizer can be used during movie recording.
• ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen 
when you half-press the shutter button while “D Auto” or “S Image AS” is 
selected. These values will appear briefly, however, in the preview image that is 
displayed immediately after you shoot a snapshot.
• The ISO sensitivity setting (page 78) must be “Auto” for “S Image AS” to work.
• Shooting while “D Auto” or “S Image AS” is...

69Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * REC Tab * Focus Frame
You can use this procedure to select from among five different shapes, including a 
heart shape, for the focus frame.
NOTE
• Half-pressing the shutter button will cause the focus frame to change one of the 
shapes shown below.
• While “Random” is selected, one of the four focus frames is selected randomly 
whenever the camera is turned on.
• When shooting with face detection, the frame shape is ß.
• On-screen grid (page 68)...

70Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * REC Tab * Auto Shutter
With Auto Shutter, the camera releases the shutter automatically when it detects that 
certain conditions are present.
.To use Detect Blur to minimize image blur (Detect Blur)
1.Point the camera at the subject and half-press the shutter button. Wait 
until the camera adjusts exposure and focus automatically.
2.Press the shutter button the rest of the way 
down.
The camera will go into a standby mode and start 
detecting hand...