Casio Exilim Ex H20g Users Guide

71Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas 
when shooting images.
• You also can optimize the balance between bright areas and dark areas in existing 
images (page 85).
Procedure
[r] (REC) * [MENU] * Quality Tab * Color Filter
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple
Procedure
[r] (REC) * [MENU] * Quality Tab * Sharpness
You can specify one of five sharpness...

72Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * Contrast
You can specify one of five contrast settings from +2 (most contrast between light and 
dark) to –2 (least contrast between light and dark).
Procedure
[r] (REC) * [MENU] * Quality Tab * Flash Intensity
You can specify one of five flash intensity settings, from –2 (weakest) to +2 
(strongest).
• Flash intensity may not change when the subject is too far away or too close.
Adjusting Image Contrast (Contrast)
Specifying Flash...

73Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 30 for the procedure for viewing snapshots.
1.Press [p] (PLAY) and then use [4] and [6] to display the movie you 
want to view.
2.Press [SET] to start playback.
Movie Playback Controls
• Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots
Viewing a Movie
Fast forward/
fast reverse[4] [6]
• Each press of either button increases the speed of the fast 
forward or fast reverse operation.
• To return to...

74Viewing Snapshots and Movies
1.Press [p] (PLAY), and then use [4] and [6] to display the panorama 
images you want to view.
2.Press [SET] to start playback of the panorama.
Panorama playback causes the image to scroll left, 
right, up, or down.
Playback Controls
• The following functions cannot be performed on a panorama image.
Dynamic Photo, Movie Converter, MOTION PRINT, Movie Editing, Trimming, 
Resize
Viewing a Panorama Image
To start or pause 
playback[SET]
To advance scroll while 
paused[4] [6]...

75Viewing Snapshots and Movies
1.In the PLAY mode, use [4] and [6] to scroll through the images until 
the one you want is displayed.
2.Slide the zoom controller towards z ([) to 
zoom.
You can use [8], [2], [4], and [6] to scroll the 
zoomed image on the monitor screen. Slide the 
zoom controller towards w to unzoom the image.
– When monitor screen contents are turned on, a 
graphic in the lower right corner of the screen 
shows what part of the zoomed image is 
currently displayed.
– To exit the zoom...

76Viewing Snapshots and Movies
1.In the PLAY mode, slide the zoom controller towards w (]) twice.
This will display the calendar screen that shows the first image recorded on each 
day.
To display the first image recorded on a particular day, 
use [8], [2], [4], and [6] to move the selection 
boundary to the day you want and then press [SET].
To exit the calendar screen, press [MENU] or [BS].
• If you save an image using any one of the following 
functions, the image will appear in the calendar on the...

77Viewing Snapshots and Movies
2.Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is 
connected.
3.Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing 
on the camera’s monitor screen.
• Pressing [ON/OFF] (Power) or [r] (REC) will not turn on the camera while the 
AV cable is connected.
• You also can change the aspect ratio of the screen and the video output 
system...

78Viewing Snapshots and Movies
Use a commercially available HDMI cable to 
connect the camera to the TV. For 
information about playback, see page 76.
• Use a commercially available HDMI cable 
that is marked with the logo shown to the 
right.
IMPORTANT!
• Output to a TV is not supported in the REC mode.
NOTE
• Use a HDMI cable that with a plug that is compatible with the camera’s HDMI mini 
connector on one end, and a plug that is compatible with your TV’s HDMI 
connector on the other end.
• Proper...

79Viewing Snapshots and Movies
.Selecting the HDMI Terminal Output Method (HDMI Output)
Procedure
[MENU] * Set Up Tab * HDMI Output
Use this setting to select the digital signal format when connecting to a TV with an 
HDMI cable.
*1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required output 
method may be 576p when outputting to a digital TV in a PAL reception area that does 
not support 1080i 60i. If you are in a PAL reception area and nothing is displayed 
automatically, change...

80Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform 
other playback operations.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Slideshow
For information about menu operations, see page 58.
Playing a Slideshow on the Camera (Slideshow)
Start
Starts the slideshow.
Images
Specifies the type of images to be included in the slideshow
All images: Snapshots and movies
T Only: Snapshots only
» Only: Movies only
Date...