Casio Exilim Ex H20g Users Guide

121Using the Camera with a Computer
Install the required software in accordance with the version of Windows you are 
running and what you want to do.
*YouTube Uploader for CASIO and Photo Transport will not run under 64-bit versions of 
Windows OS.
Using the Camera with a Windows Computer
When you want to 
do this:Operating System 
VersionInstall this software:See 
page:
Save images to a 
computer and view 
them there manuallyWindows 7, Windows 
Vista, Windows XP, 
Windows 2000Installation not required....

122Using the Camera with a Computer
.Computer System Requirements for Bundled Software
Computer system requirements are different for each of the applications. See the 
“Read me” file that comes with each application for details. Information about 
computer system requirements also can be found under “Computer System 
Requirements for Bundled Software (Bundled CD-ROM)” on page 165 of this manual.
.Precautions for Windows Users
• Except for Adobe Reader, the bundled software requires Administrator...

123Using the Camera with a Computer
4.Turn off the camera 
and then use the USB 
cable that comes with 
the camera to connect 
it to your computer.
• The camera does not 
draw power over the 
USB cable. Make sure 
the camera’s battery is 
sufficiently charged 
before connecting.
• Make sure that you 
insert the cable 
connector into the USB/
AV port until you feel it 
click securely into 
place. Failure to insert 
the connector fully can 
result in poor 
communication or malfunction.
• Note that even...

124Using the Camera with a Computer
8.Right-click the “DCIM” folder.
9.On the shortcut menu that appears, click “Copy”.
10.Windows 7, Windows Vista users: Click “Start” and then “Documents”.
Windows XP users: Click “Start” and then “My Documents”.
Windows 2000 users: Doubleclick “My Documents” to open it.
• If you already have a “DCIM” folder in “Documents” (Windows 7, Windows 
Vista) or “My Documents” (Windows XP, Windows 2000), the next step will 
overwrite it. If you want to keep the existing “DCIM”...

125Using the Camera with a Computer
3.Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 138.
• An image that was rotated on the camera will be displayed on your computer 
screen in its original (unrotated) orientation.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing 
images. Doing so can cause data to become corrupted.
To play back a movie, first copy it to your computer and then double-click the...

126Using the Camera with a Computer
.Movie Playback Precautions
• Be sure to move the movie data to the hard disk of your computer before trying to 
play it. Proper movie playback may not be possible for data accessed over a 
network, from a memory card, etc.
• Proper movie playback may not be possible on some computers. If you experience 
problems, try the following.
– Try recording movies with a quality setting of “STD”.
– Quit any other applications you have running, and stop resident applications....

127Using the Camera with a Computer
.To upload a movie file to YouTube
• Before you can use YouTube Uploader for CASIO, you need to go to the YouTube 
website (http://www.youtube.com/) and register as a user there.
• Do not upload any video that is copyrighted (including neighboring copyrights) 
unless you yourself own the copyright or you have obtained the permission of the 
applicable copyright holder(s).
• A single movie shoot with the “For YouTube” scene can have a maximum file size 
of 2048MB or a...

128Using the Camera with a Computer
If you want to transfer images from your computer to the camera, install Photo 
Transport on your computer from the CD-ROM that comes with the camera.
.To install Photo Transport
1.On the CD-ROM menu screen, select “Photo Transport”.
2.After reading the information about installation conditions and system 
requirements for installation in the “Read me” file, install Photo 
Transport.
.To transfer images to the camera
1.Connect the camera to your computer (page 122)....

129Using the Camera with a Computer
.To transfer computer screen captures to the camera
1.Connect the camera to your computer (page 122).
2.On your computer, click the following: Start * All Programs * 
CASIO * Photo Transport.
This starts up Photo Transport.
3.Display the screen whose screen capture you want to transfer.
4.Click the [Capture] button.
5.Draw a boundary around the area you want to capture.
Move your mouse pointer to the upper left corner of the area you want to capture 
and then hold down...

130Using the Camera with a Computer
After you shoot an image while “On” is selected for the “Record Lat/Long” setting, you 
will be able to display the location where you shot it on a map.
To use this function, you need to access the CD-ROM that comes with the camera 
and then go to the Picasa website and install Picasa, or to the Google Earth website 
and install Google Earth.
For details about Picasa and Google Earth, see the HELP on the Picasa and Google 
Earth websites.
1.Start up your computer, and...