Casio Exilim Ex H20g Users Guide

101Using the Hybrid-GPS
bnUser image mark
Locations where you shot images are 
indicated by   marks.
• User image marks are normally 
blue. However, user image marks 
outside of the radar screen lines 
are light blue.
• A white wedge within a user image 
mark indicates the horizontal 
direction the camera was pointing 
when the image was shot. Wedge 
positions can be indicated in 22.5 
degree units.boGPS wave condition icon
Indicates current GPS satellite wave 
receipt conditions (page 92).
.Photogenic...

102Using the Hybrid-GPS
1.Press [ý] (MAP) to enter the MAP mode.
• Each press of [ý] (MAP) toggles between the User Image mode and the 
Photogenic Spot mode.
2.Use the procedures below to move a user image mark or a photogenic 
spot mark near the center of the display’s radar screen lines.
• Moving a user image mark or photogenic spot mark to the center of the radar 
screen causes the corresponding image (user image or photogenic spot 
image) to move to the top of the image list to the right of the map....

103Using the Hybrid-GPS
3.Press [SET].
This will display a full-screen view of the image (user image or photogenic spot 
image) where the image cursor was located in the image list.
• While a full-screen image is displayed, you can use [4] (scrolls to the image 
that was above the current image in the image list) and [6] (scrolls to the 
image that was below the current image in the image list) to scroll to another 
image.
• Sliding the zoom controller towards z ([) will zoom in on and enlarge the 
image...

104Using the Hybrid-GPS
IMPORTANT!
• If a section of the zoom bar is gray while a map 
is displayed, it indicates that the camera does 
not have further detailed map data for the gray 
section. In this case, if you slide the zoom 
controller towards z (Telephoto) and the 
zoom pointer reaches a gray section, the 
pointer will stop and the map will not zoom in 
any further.
• A gray rectangular frame on a map indicates that there is detailed map data 
available for that area in camera memory. Sliding the...

105Using the Hybrid-GPS
This section explains the menu items that are used when performing operations and 
configuring settings in the MAP mode.
Procedure
[ ý ] (MAP)  * [MENU]  * MAP Tab  * Save Log
You can use this procedure to save position  information from different locations and 
different times. While “On” is selected  for the “Save Log” setting, the following 
information is saved in camera memo ry for 14 days as positioning log data.
– Date (year, month, day) and time (hour, minute)
– Latitude...

106Using the Hybrid-GPS
Use the procedure below to convert all of the positioning log data currently in camera 
memory to a KML file (extension: .kml) and save it to a memory card.
1.Turn off the camera and load the memory card to which you want to 
save the file.
2.Turn on the camera and then press [ý] (MAP).
3.Press [MENU]. On the “MAP” tab, select “Output Log”.
4.Use [8] and [2] to select “Save” and then press [SET].
The message “Saving data. Please wait...” will appear, indicating that the...

107Using the Hybrid-GPS
3.Taking care not to drop the camera, slowly swing it around in a figure 
eight for about 10 seconds.
Use the wrist of the hand that is holding the camera to move in a way that forms a 
figure eight. This will correct for the magnetism and adjust direction sensor 
accuracy.
The message “Completed normally.” will appear to let you know that accuracy 
adjustment is complete, and the map screen will return to the display.
• If the message “Correction failed. Try again.” appears,...

108Using the Hybrid-GPS
Procedure
[MENU] * Set Up Tab * Auto Rotate
The camera automatically detects whether a snapshot image was shot in portrait or 
landscape orientation and displays it accordingly.
• The current “Auto Rotate” setting is ignored while “Off” is selected for the “GPS” 
setting (page 92).
Procedure
[MENU] * Set Up Tab * Time Auto Correct
While “On” is selected for the “Time Auto Correct” setting, the camera uses time data 
received from GPS satellites to automatically correct its clock...

109Using the Hybrid-GPS
As with normal images (without location information), use the PLAY mode to display 
images with location information.
See page 30 for the procedure for viewing images.
• While an image with location information is on 
the display, pressing [8] (DISP) will display the 
location information (latitude and longitude) that 
was recorded with the image.
IMPORTANT!
• In the PLAY mode, you cannot display the map 
where the image was recorded while the image 
is displayed.
Use this...

110Using the Hybrid-GPS
.Using the camera in another country
• Certain countries or areas may place restrictions on the use of GPS and/or the 
accumulation of positioning log data. This camera has a built-in GPS function. 
Before taking it to another country, be sure to check with the appropriate embassy 
or with your travel agent to find out if bringing in a camera with a GPS function and/
or accumulation of position information log data is allowed in that country.
• Recommended photogenic spots are...