Casio Exilim EX H20G User Manual

							11
.Charger Unit
The monitor screen uses various indicators, icons, and values to keep you informed 
of the camera’s status.
• The sample screens in this section are intended to show you the locations of all the 
indicators and figures that can appear on the monitor screen in various modes. 
They do not represent screens that actually appear on the camera.
.Snapshot Recording
Monitor Screen Contents
1Remaining snapshot memory 
capacity (page 179)
2Focus frame (pages 27, 41)
3Movie image quality (page 66)
4Recording mode (page 26)
5White balance setting (page 69)
6Remaining movie memory capacity 
(page 50)
7Zoom/Single SR Quality indicator 
(page 48)
8Metering mode (page 70)
9Snapshot image size (page 35)
bkSnapshot image quality (page 66)
blFlash (page 37)
bmFocus (page 39)
bnAF Area (page 41)
boISO sensitivity (page 43)
bpSelf-timer (page 44)
bqFace Detection/Make-up/Landscape 
(pages 45, 67, 68)
brExposure compensation (page 46)
bsDate/time (page 47)
btTimestamp indicator (page 145)
ckPlace name stamp (page 96)
clShutter speed
cmAperture value
cnPlace name of current location (page 94)
coBattery level indicator (page 19)
cpHistogram (page 152)
cqAnti Shake (page 61)
crGPS wave condition icon (pages 93, 103)
NOTE
• If the current aperture, shutter speed, ISO sensitivity, or Auto Exposure is not 
correct, the setting will turn orange when you half-press the shutter button.
3
2
11+7- Contacts
2[CHARGE] Lamp
3AC jack
brbl
bm
bn
bp
bq
cp
co
cq cr
bsbtckcn9bk
45 1768
cl
cm 23
bo
Downloaded From camera-usermanual.com Casio Manuals 
						

							12
.Movie Recording
.Snapshot Viewing
1Recording mode (page 50)
2White balance setting (page 69)
3Remaining movie memory capacity (page 50)
4Movie recording time (page 50)
5Exposure compensation (page 46)
6Battery level indicator (page 19)
7Histogram (page 152)
8GPS wave condition icon (pages 93, 103)
1File type
2Protect indicator (page 87)
3Folder name/file name (page 137)
4Snapshot image quality (page 66)
5Snapshot image size (page 35)
6ISO sensitivity (page 43)
7Aperture value
8Shutter speed
9Date/time (page 47)
bkShooting location name (page 94)
blMetering mode (page 70)
bmWhite balance setting (page 85)
bnFlash (page 37)
boRecording mode
bpBattery level indicator (page 19)
bqHistogram (page 152)
brLatitude, longitude (page 93)
bsExposure compensation (page 46)
12
65 7
8
34
31
bq
bs
bp bmblbn bo bk4
7 5
8
9 6
2
br
Downloaded From camera-usermanual.com Casio Manuals 
						

							13
.Movie Playback
NOTE
• For details about MAP mode display contents, see “Using the Hybrid-GPS” 
(page 91).
1File type
2Protect indicator (page 87)
3Folder name/file name (page 137)
4Movie recording time (page 73)
5Movie image quality (page 66)
6Date/time (page 47)
7Shooting location name (page 94)
8Battery level indicator (page 19)
9Latitude, longitude (page 93)
1
4
5
8723
6
9
Downloaded From camera-usermanual.com Casio Manuals 
						

							14Quick Start Basics
Quick Start Basics
What is a digital camera?
Delete
A digital camera stores images on a memory card, so you can record and 
delete images a countless number of times.
Play Record
You can use the images you record in a variety of different ways.
Store images on your 
computer.Print images. Attach images to e-mail.
Downloaded From camera-usermanual.com Casio Manuals 
						

							15Quick Start Basics
Your CASIO camera is packed with a powerful selection of features and functions to 
make recording of digital images easier, including the following three main functions.
What you can do with your CASIO camera
Hybrid-GPS
The Hybrid-GPS of your camera provides both 
standard GPS and an autonomous positioning 
system that uses sensors for positioning indoors and 
in other locations where GPS satellite waves cannot 
reach. Hybrid-GPS provides you with the following 
capabilities.
• Recording of current location information (latitude, longitude, camera aiming 
direction) along with image data (snapshots and movies)
• Recording of the current place name along with image data (snapshots and 
movies) and direct stamping of the place name in images (snapshots)
• Display of images and shooting locations on a map
• Map-based searches of nearby recommended photogenic spots
Premium Auto
Select Premium Auto recording and the 
camera automatically determines whether 
you are shooting a subject or scenery, and 
other conditions. Premium Auto delivers 
higher image quality than standard Auto.
See page 91 for more information.
See page 26 for more information.
Downloaded From camera-usermanual.com Casio Manuals 
						

							16Quick Start Basics
BEST SHOT
Simply select the sample scene you want and the 
camera sets up automatically. Then all you need to do 
is press the shutter button for perfect images.
See page 52 for more information.
Downloaded From camera-usermanual.com Casio Manuals 
						

							17Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps 
under “To charge the battery” to bring the battery to a full charge.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-90) for 
power. Never try to use any other type of battery.
1.Positioning the positive +
 and 
negative -
 terminals of the battery 
with those of the charger unit, load 
the battery into the charger unit.
2.Plug the charger unit into a 
household power outlet.
About 200 minutes are required to 
reach full charge. The [CHARGE] lamp 
will go out when charging is complete. 
Unplug the power cord from the power 
outlet and then remove the battery from 
the charger.
First, charge the battery prior to use.
To charge the battery
Lamp StatusDescription
Lit Red Charging
Flashing RedAbnormal ambient temperature, charger problem, or 
battery problem (page 161)
Off Charging complete
[CHARGE] lamp
Downloaded From camera-usermanual.com Casio Manuals 
						

							18Quick Start Basics
Other Charging Precautions
• Use the special charger (BC-90L) to charge the special lithium ion battery (NP-90). 
Never use any other type of charger device. Attempting to use a different charger 
can result in an unexpected accident.
• A battery that is still warm due to normal use may not charge fully. Give the battery 
time to cool before charging it.
• A battery discharges slightly even when it is not loaded in the camera. Because of 
this, it is recommended that you charge the battery immediately before you need to 
use it.
• Charging the camera’s battery may cause interference with TV and radio reception. 
If this happens, plug the charger into an outlet that is further away from the TV or 
radio.
• Actual charging time depends on current battery capacity and charging conditions.
1.Open the battery cover.
Slide the battery cover slider towards OPEN 
and then open it as indicated by the arrows 
in the illustration.
2.Load the battery.
With the EXILIM logo on the 
battery facing downwards (in 
the direction of the lens), hold 
the stopper next to the battery 
in the direction indicated by 
the arrow as you slide the 
battery into the camera. Press 
the battery in until the stopper 
secures it in place.
To load the battery
1
2
EXILIM logo Stopper
FrontBack Battery contacts
Downloaded From camera-usermanual.com Casio Manuals 
						

							19Quick Start Basics
3.Close the battery cover.
Close the battery cover and then shift the 
slider towards LOCK.
• For information about how to replace the 
battery, see page 161.
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor screen indicates 
remaining power as shown below.
 indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when   is indicated. Charge the battery immediately.
• The level shown by the battery indicator may change when you switch between the 
REC mode and PLAY mode.
• Leaving the camera for about 30 days with no power supplied while the battery is 
dead will cause its date and time settings to be cleared. A message telling you to 
configure time and date settings will appear the next time you turn on the camera 
after restoring power. When this happens, configure date and time settings (page 
146).
• See page 183 for information about battery life and number of shots.
Battery Power Conservation Tips
• When you do not need to use the flash, select ? (Flash Off) for the flash setting 
(page 37).
• Enable the Auto Power Off and the Sleep features to protect against wasting 
battery power when you forget to turn off the camera (pages 147, 148).
• Select “Off” for “Continuous AF” (page 60).
• If you do not want to use the GPS function, select “Off” for the “GPS” setting 
(page 92).
Remaining PowerHigh Low
Battery Indicator***
Indicator ColorCyan*Amber*Red*Red
2
1
Downloaded From camera-usermanual.com Casio Manuals 
						

							20Quick Start Basics
The first time you load a battery into the camera, a screen appears for configuring the 
display language, date, and time settings. Failure to set the date and time correctly 
will cause the wrong date and time data to be recorded with images.
IMPORTANT!
• A screen for language selection will not appear in step 2 of the procedure below if 
you purchased a camera intended for the Japanese market. To change the display 
language from Japanese in this case, use the procedure under “Specifying the 
Display Language (Language)” (page 147). Note that a version of this manual in 
the language you select may not be included with a camera intended for the 
Japanese market.
• Camera models sold in certain geographic areas may not support display language 
selection.
1.Press [ON/OFF] (Power) to turn on the 
camera.
2.Use [8], [2], [4], and [6] to select the 
language you want and then press 
[SET].
3.Use [8] and [2] to select a date style and then press [SET].
Example: July, 10, 2012
YY/MM/DD * 12/7/10
DD/MM/YY * 10/7/12
MM/DD/YY * 7/10/12
4.Set the date and the time.
Use [4] and [6] to select the setting you want to 
change and then use [8] and [2] to change it.
To switch between 12-hour and 24-hour format, press 
[BS].
5.After setting the date and time, use [4] and [6] 
to select “Apply” and then press [SET].
Configuring Basic Settings the First Time You Turn On the 
Camera
SET
[ON/OFF] (Power)
[BS]
Downloaded From camera-usermanual.com Casio Manuals