Casio Exilim EX H20G User Manual

							141Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * GPS
See page 92 for details.
Procedure
[MENU] * Set Up Tab * Record Lat/Long
See page 93 for details.
Procedure
[MENU] * Set Up Tab * Auto RotateSee page 108 for details.
Enabling the GPS Function (GPS)
Recording Location Information with Image Data 
(Record Lat/Long)
Auto Image Orientation Detection and Rotation (Auto Rotate)
Downloaded From camera-usermanual.com Casio Manuals 
						

							142Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Sounds
• Setting a volume level of 0 mutes output.
Procedure
[MENU] * Set Up Tab * Startup
Display the image you want to use as your startup image and then select “On”.
• The startup image does not appear when you turn on the camera by pressing [p] 
(PLAY).
• You can specify a snapshot you recorded as the startup image, or you can use the 
special startup image provided in the camera’s built-in memory.
• Formatting built-in memory (page 151) will delete the current startup image setting.
Configuring Camera Sound Settings (Sounds)
Startup
Specifies the startup sound.
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off
Half Shutter
Shutter
Operation
 OperationSpecifies the sound volume. This setting is also used as the 
audio level during video output (page 76).
 PlaySpecifies the volume of movie audio output. This volume 
setting is not used during video output (from the USB/AV 
port).
Configuring a Startup Image (Startup)
=
=
Downloaded From camera-usermanual.com Casio Manuals 
						

							143Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial 
number used in file names (page 137).
Procedure
[MENU] * Set Up Tab * Create Folder
• Images recorded with the BEST SHOT “For YouTube” scene are stored in special 
folders. They are not stored in the folder you create here.
Specifying the File Name Serial Number Generation Rule 
(File No.)
ContinueTells the camera to remember the last used file number. A new file will 
be named using the next sequential number, even if files are deleted or 
if a blank memory card is loaded. If a memory card is loaded and that 
card already has files stored on it and the largest sequential number in 
the existing file names is greater than the largest sequential number 
remembered by the camera, numbering of new files will start from the 
largest sequential number in the existing file names plus 1.
ResetRestarts the serial number from 0001 whenever all files are deleted or 
when the memory card is replaced with a blank one. If a memory card 
is loaded and that card already has files stored on it, numbering of new 
files will start from the largest sequential number in the existing file 
names number plus 1.
Creating an Image Storage Folder (Create Folder)
Create FolderCreates a folder with a unique number (page 137). Files will be 
stored in the new folder starting from when you record your 
next image.
CancelCancels folder creation.
Downloaded From camera-usermanual.com Casio Manuals 
						

							144Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * World Time
You can use the World Time screen to view the current time in a zone that is different 
from your Home City when you go on a trip, etc. World Time displays the current time 
in 162 cities in 32 time zones around the globe.
1.Use [8] and [2] to select “World” and then press [6].
• To change the geographic area and city for the time where you normally use 
the camera, select “Home”.
2.Use [8] and [2] to select “City” and then press [6].
• To change the “World” setting to summer time, use [8] and [2] to select 
“DST” and then select “On”. Summer time is used in some geographical areas 
to advance the current time setting by one hour during the summer months.
3.Use [8], [2], [4], and [6] to select the geographic area you want and 
then press [SET].
4.Use [8] and [2] to select the city you want and then press [SET].
5.Press [SET].
IMPORTANT!
• Before configuring World Time settings, make sure that the Home City setting is 
the place where you live or normally use the camera. If it isn’t, select “Home” on the 
screen in step 1 and configure the Home City, date, and time settings as required 
(page 146).
• You can configure the camera to use time data received from the GPS satellites to 
automatically adjust World Time settings in accordance with the current time. For 
more information, see “Correcting Camera Clock Settings Automatically (Time 
Auto Correct)” (page 108).
Configuring World Time Settings (World Time)
Downloaded From camera-usermanual.com Casio Manuals 
						

							145Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in 
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or 
deleted.
Example: July, 10, 2012, 1:25 p.m.
• Even if you do not stamp the date and/or time with Timestamp, you can do so later 
using the DPOF function or some printing application (page 119).
• Time stamping is disabled when certain BEST SHOT scenes are being used.
Procedure
[MENU] * Set Up Tab * Stamp Place
See page 96 for details.
Procedure
[MENU] * Set Up Tab * Time Auto Correct
See page 108 for details.
Time Stamping Snapshots (Timestamp)
Date2012/7/10
Date&Time2012/7/10 1:25pm
OffNo stamping of date and/or time
Stamping a Place Name into an Image (Stamp Place)
Adjusting the Camera Clock Setting Automatically 
(Time Auto Correct)
Downloaded From camera-usermanual.com Casio Manuals 
						

							146Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Adjust
When the date and time settings are what you want, press [SET] to apply them.
• You can specify a date from 2001 to 2049.
• Be sure to select your Home City (page 144) before setting the time and date. If 
you set the time and date while the wrong city is selected for your Home City, the 
times and dates of all of the World Time cities (page 144) will be wrong.
Procedure
[MENU] * Set Up Tab * Date Style
You can select from among three different styles for the date.
Example: July, 10, 2012
• This setting also affects the Control Panel date format as shown below (page 34).
YY/MM/DD or MM/DD/YY: MM/DD
DD/MM/YY: DD/MM
Setting the Camera’s Clock (Adjust)
[8] [2]Change the setting at the cursor location
[4] [6]Move the cursor between settings
[BS]Toggles between 12-hour and 24-hour format
Specifying the Date Style (Date Style)
YY/MM/DD12/7/10
DD/MM/YY10/7/12
MM/DD/YY7/10/12
Downloaded From camera-usermanual.com Casio Manuals 
						

							147Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Language
.Specify the display language you want.
1Select the tab on the right.
2Select “Language”.
3Select the language you want.
• Camera models sold in certain geographic areas 
may not support display language selection.
• Place names (country, landmark), city names, 
recommended photogenic spot names, and place name candidates (country, city, 
landmark) when shooting may not match the language you select with this setting.
Place names and proper names in map data, recommended photogenic spot data, 
and place name data are displayed in the languages used when the data way 
originally compiled.
Procedure
[MENU] * Set Up Tab * Sleep
This feature turns off the monitor screen whenever no camera operation is performed 
for a preset amount of time. Press any button to turn the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is 
selected.)
• Sleep is disabled under any of the following conditions.
– In the PLAY mode
– In the MAP mode
– While the camera is connected to a computer or other device
– During a slideshow
– During “Ë Tracking”
– During movie recording and playback
• When both sleep and Auto Power Off are turned on, Auto Power Off takes priority.
Specifying the Display Language (Language)
Configuring Sleep State Settings (Sleep)
1
23
Downloaded From camera-usermanual.com Casio Manuals 
						

							148Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for 
a preset amount of time.
Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the 
PLAY mode.)
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During “Ë Tracking”
– During movie recording and playback
Procedure
[MENU] * Set Up Tab * REC/PLAY
• With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC 
mode or [p] (PLAY) in the PLAY mode.
• While the “Power On/Off” setting is selected, pressing [ý] (MAP) will turn on 
power only. It will not turn off power.
• Change this setting to anything besides “Disable” before connecting to a TV for 
image viewing.
Configuring Auto Power Settings (Auto Power Off)
Configuring [r], [p], and [ý] Settings (REC/PLAY)
Power OnCamera turns on whenever [r] (REC), [p] (PLAY), or [ý] 
(MAP) is pressed.
Power On/OffCamera turns on or off whenever [r] (REC) or [p] (PLAY) 
is pressed.
DisableCamera does not turn on or off whenever [r] (REC), [p] 
(PLAY), or [ý] (MAP) is pressed.
Downloaded From camera-usermanual.com Casio Manuals 
						

							149Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Ü Disabled
The camera will not start the image delete operation when you press [2] ( ) while 
“Ü Disabled” is turned on.
You can protect against accidental deletion of images by selecting “On” for 
“Ü Disabled”.
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is 
used when exchanging data with a computer, printer, or other external device.
Disabling File Deletion (Ü Disabled)
Configuring USB Protocol Settings (USB)
Mass 
StorageSelect this setting when connecting to a computer (pages 122, 
132). With this setting, the computer sees the camera as an 
external storage device. Use this setting for normal transfer of 
images from the camera to a computer.
PTP 
(PictBridge)Select this setting when connecting to a printer that supports 
PictBridge (page 115). This setting simplifies the transfer of image 
data to the connected device.
Downloaded From camera-usermanual.com Casio Manuals 
						

							150Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video 
output system. You can also specify an aspect ratio of 4:3 or 16:9.
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use. 
Images will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera’s video signal output setting 
matches the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC 
or PAL.
Procedure
[MENU] * Set Up Tab * HDMI Output
See page 79 for details.
Selecting the Screen Aspect Ratio and Video Output System 
(Video Out)
NTSCVideo system used in Japan, the U.S., and other countries
PALVideo system used in Europe and other areas
4:3Normal TV screen aspect ratio
16:9Wide screen aspect ratio
Selecting the HDMI Terminal Output Method (HDMI Output)
Downloaded From camera-usermanual.com Casio Manuals