Casio Exilim EX G1 User Manual

91Viewing Snapshots and Movies
1.In the PLAY mode, press the zoom button w 
(]).
Use [8], [2], [4] and [6] to move the selection 
boundary around the image menu.
To view a particular image, use [8], [2], [4], or [6] to 
move the selection boundary to the image you want and 
then press [SET].
1.In the PLAY mode, press the zoom button w (]) twice.
This will display the calendar screen that shows the first image recorded on each 
day.
To display the first image recorded on a particular day, 
use [8], [2],...

92Viewing Snapshots and Movies
1.Turn off the camera. Next, rotate the cover lock dial in the [4
OPEN] 
direction and open the memory card/terminal cover.
2.Use the AV cable that comes with the camera to connect it to the TV.
• Make sure that you insert the cable connector into 
the USB/AV port until you feel it click securely into 
place. Failure to insert the connector fully can result 
in poor communication or malfunction.
• Note that even while the connector is fully inserted, 
you still will be able...

93Viewing Snapshots and Movies
4.Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing 
on the camera’s monitor screen.
• You also can change the aspect ratio of the screen and the video output 
system (page 146).
5.Now you can display images and play back movies as you normally do.
IMPORTANT!
• Audio is initially output by the camera at maximum volume. When you first start 
displaying images, set the TV volume control at a relatively low...

94Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform 
other playback operations.
Procedure
PLAY mode * [MENU] * PLAY Tab * Slideshow
For information about menu operations, see page 65.
Playing a Slideshow on the Camera (Slideshow)
Start
Starts the slideshow.
Images
Specifies the type of images to be included in the slideshow.
All images: Snapshots, movies, and audio recordings
T Only: Snapshots and audio...

95Other Playback Functions (PLAY)
• To stop the slideshow, press [SET]. Pressing [MENU] instead of [SET] stops the 
slideshow and returns to the menu screen.
• Adjust audio volume by pressing [2] and then press [8] or [2] during playback.
• All button operations are disabled while the slideshow is transitioning from one 
image to another.
• The time required for transition from one image to another may be longer in the 
case of an image that was not recorded with this camera.
You can replace the built-in...

96Other Playback Functions (PLAY)
1.Connect the camera to your computer (pages 122, 131).
If you plan to save the music files to the camera’s memory card, make sure the 
card is loaded in the camera.
2.Perform one of the following operations to open the memory card or 
built-in memory.
This will cause the camera to be recognized by your computer as a Removable 
Disk (Drive).
• Windows
1Windows 7/Vista: Start * Computer
Windows XP: Start * My Computer
Windows 2000: Double-click “My Computer”....

97Other Playback Functions (PLAY)
Procedure
PLAY mode * Spnapshot Screen * [MENU] * PLAY Tab * 
Layout Print
You can use the following 
procedure to insert existing 
snapshots into the frames of a 
layout and produce a new image 
that contains multiple snapshots.
1.Use [4] and [6] to select 
the layout pattern you want 
and then press [SET].
2.Use [4] and [6] to select the background color and then press [SET].
3.Use [4] and [6] to select the images you want to include in the layout 
then press [SET]....

98Other Playback Functions (PLAY)
Procedure
PLAY mode * Movie Screen to be Used * [MENU] * PLAY Tab * 
MOTION PRINT
1.Use [4] and [6] to scroll 
through the movie frames 
and display the one you 
want to use as the image of 
the MOTION PRINT image.
Holding down [4] or [6] scrolls 
at high speed.
2.Use [8] and [2] to select either “9 frames” or “1 frame” and then 
press [SET].
• When “9 frames” is selected, the frame you select in step 1 will be in the center 
of the MOTION PRINT image.
• Only the frames...

99Other Playback Functions (PLAY)
Procedure
PLAY mode * Movie Screen of Movie to be Edited * [MENU] * 
PLAY Tab * Movie Editing
The Movie Editing feature lets you use one of the following procedures to edit out a 
specific part of a movie.
1.Use [8] and [2] to select the editing method you want to use and then 
press [SET].
2.Use [4] and [6] to scroll through the movie and 
search for the frame (point) from which or to 
which you want to cut the movie (the cut point).
• You also can search for the cut...

100Other Playback Functions (PLAY)
3.When the frame where you want the cut point to be is displayed, press 
[2].
4.Use [8] and [2] to select “Yes” and then press [SET].
The selected cut operation will take considerable time to complete. Don’t try to 
perform any camera operation until the “Busy... Please wait...” message 
disappears from the monitor screen. Note that a cut operation can take a long 
time if the movie being edited is long.
IMPORTANT!
• When you edit a movie, only the result is saved. The...