Casio Exilim EX G1 User Manual
Here you can view all the pages of manual Casio Exilim EX G1 User Manual. The Casio manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 41
41Snapshot Tutorial NOTE • Take care so your fingers and the strap do not block the flash. • The desired effect may not be obtained when the subject is too far away or too close. • Flash charging time (page 176) depends on operating conditions (battery condition, ambient temperature, etc.). • Shooting with flash turned off when lighting is dim results in a slow shutter speed, which can cause image blur due to camera movement. Under such conditions, secure the camera with a tripod, etc. • With red eye...
Page 42
![Page 42
42Snapshot Tutorial
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
1.In the REC mode, press [SET].
2.Use [ 8] and [ 2] to select the fourth Control Panel option from the top
(Self-timer).
3.Use [4] and [ 6] to select the setting you want and then press [SET].
• The front lamp flashes while the Self-timer countdown is
in progress (Except when the REC Light is lit.).
• You can interrupt an ongoing Self-timer...](http://img.usermanuals.tech/thumb/16/38223/w300_Casio_Exilim_EX-G1-41.png "Page 42
42Snapshot Tutorial
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
1.In the REC mode, press [SET].
2.Use [ 8] and [ 2] to select the fourth Control Panel option from the top
(Self-timer).
3.Use [4] and [ 6] to select the setting you want and then press [SET].
• The front lamp flashes while the Self-timer countdown is
in progress (Except when the REC Light is lit.).
• You can interrupt an ongoing Self-timer...")
42Snapshot Tutorial With the Self-timer, pressing the shutter button starts a timer. The shutter is released and the image is shot after a fixed amount of time. 1.In the REC mode, press [SET]. 2.Use [ 8] and [ 2] to select the fourth Control Panel option from the top (Self-timer). 3.Use [4] and [ 6] to select the setting you want and then press [SET]. • The front lamp flashes while the Self-timer countdown is in progress (Except when the REC Light is lit.). • You can interrupt an ongoing Self-timer...
Page 43
![Page 43
43Snapshot Tutorial
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the fifth Control Panel option from the top
(AF Area).
3.Use [4] and [6] to select the setting you want and then press [SET].
4.Point the camera at the subject and half-press the shutter button. Wait
until the camera adjusts exposure and focus automatically.
5.Press the shutter button the rest of the way down.
Specifying the Auto Focus Area (AF Area)
IntelligentThe camera automatically determines the focus point on the...](http://img.usermanuals.tech/thumb/16/38223/w300_Casio_Exilim_EX-G1-42.png "Page 43
43Snapshot Tutorial
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the fifth Control Panel option from the top
(AF Area).
3.Use [4] and [6] to select the setting you want and then press [SET].
4.Point the camera at the subject and half-press the shutter button. Wait
until the camera adjusts exposure and focus automatically.
5.Press the shutter button the rest of the way down.
Specifying the Auto Focus Area (AF Area)
IntelligentThe camera automatically determines the focus point on the...")
43Snapshot Tutorial 1.In the REC mode, press [SET]. 2.Use [8] and [2] to select the fifth Control Panel option from the top (AF Area). 3.Use [4] and [6] to select the setting you want and then press [SET]. 4.Point the camera at the subject and half-press the shutter button. Wait until the camera adjusts exposure and focus automatically. 5.Press the shutter button the rest of the way down. Specifying the Auto Focus Area (AF Area) IntelligentThe camera automatically determines the focus point on the...
Page 44
44Snapshot Tutorial IMPORTANT! •“È Multi” cannot be selected for the Auto Focus area while you are using Face Detection (page 46). •“Ë Tracking” cannot be selected for the Auto Focus area while you are using Auto Shutter (page 73). • Selecting “Ë Tracking” can cause vibration and noise to occur due to lens operation while tracking a subject. This does not indicate malfunction. “Û Spot” or “Ë Tracking” “È Multi” Focus frame Focus frame “Ò Intelligent” Focus frame Downloaded From camera-usermanual.com...
Page 45
![Page 45
45Snapshot Tutorial
ISO sensitivity is a measure of sensitivity to light.
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the sixth Control Panel option from the top
(ISO Sensitivity).
3.Use [4] and [6] to select the setting you want and then press [SET].
• “AUTO” ISO sensitivity always is applied for movies, regardless of the current
ISO sensitivity setting.
• Higher ISO sensitivity values tend to result in digital noise in images.
Specifying ISO Sensitivity (ISO)
AUTOAdjusts sensitivity...](http://img.usermanuals.tech/thumb/16/38223/w300_Casio_Exilim_EX-G1-44.png "Page 45
45Snapshot Tutorial
ISO sensitivity is a measure of sensitivity to light.
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the sixth Control Panel option from the top
(ISO Sensitivity).
3.Use [4] and [6] to select the setting you want and then press [SET].
• “AUTO” ISO sensitivity always is applied for movies, regardless of the current
ISO sensitivity setting.
• Higher ISO sensitivity values tend to result in digital noise in images.
Specifying ISO Sensitivity (ISO)
AUTOAdjusts sensitivity...")
45Snapshot Tutorial ISO sensitivity is a measure of sensitivity to light. 1.In the REC mode, press [SET]. 2.Use [8] and [2] to select the sixth Control Panel option from the top (ISO Sensitivity). 3.Use [4] and [6] to select the setting you want and then press [SET]. • “AUTO” ISO sensitivity always is applied for movies, regardless of the current ISO sensitivity setting. • Higher ISO sensitivity values tend to result in digital noise in images. Specifying ISO Sensitivity (ISO) AUTOAdjusts sensitivity...
Page 46
![Page 46
46Snapshot Tutorial
Selecting “On” causes the front lamp to turn on for illumination
when shooting under low lighting conditions.
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the third Control Panel
option from the bottom (REC Light).
3.Use [4] and [6] to select “On” and then press [SET].
•y (REC Light) is displayed on the control panel while the REC Light is
enabled.
IMPORTANT!
• Never look directly into the front lamp while it is lit.
• Never aim the front lamp at a person who is...](http://img.usermanuals.tech/thumb/16/38223/w300_Casio_Exilim_EX-G1-45.png "Page 46
46Snapshot Tutorial
Selecting “On” causes the front lamp to turn on for illumination
when shooting under low lighting conditions.
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the third Control Panel
option from the bottom (REC Light).
3.Use [4] and [6] to select “On” and then press [SET].
•y (REC Light) is displayed on the control panel while the REC Light is
enabled.
IMPORTANT!
• Never look directly into the front lamp while it is lit.
• Never aim the front lamp at a person who is...")
46Snapshot Tutorial Selecting “On” causes the front lamp to turn on for illumination when shooting under low lighting conditions. 1.In the REC mode, press [SET]. 2.Use [8] and [2] to select the third Control Panel option from the bottom (REC Light). 3.Use [4] and [6] to select “On” and then press [SET]. •y (REC Light) is displayed on the control panel while the REC Light is enabled. IMPORTANT! • Never look directly into the front lamp while it is lit. • Never aim the front lamp at a person who is...
Page 47
47Snapshot Tutorial 4.Point the camera at the subject(s). The camera will detect human faces and display a frame around each one. 5.Half-press the shutter button. The camera will focus and the frames around the faces it focuses on will turn green. 6.Press the shutter button the rest of the way down. Tips for Best Face Detection Results • The camera performs center focus if it cannot detect a face. • Always make sure that Auto Focus (AF) is selected as the focus mode when shooting with face...
Page 48
![Page 48
48Snapshot Tutorial
The Make-up Mode smoothes the skin texture of the subject and softens facial
shadows caused by harsh sunlight for better looking portraits.
1.In the REC mode, use [4] and [6] to display
± in the control panel, which enters the
Make-up Mode.
•If ± does not appear in the control panel, press
[4] or [6] many times until it appears. Each press
of [4] or [6] will cycle the control panel option in
the following sequence: Face Detection (page 46)
* Make-up Mode * Landscape Mode (page...](http://img.usermanuals.tech/thumb/16/38223/w300_Casio_Exilim_EX-G1-47.png "Page 48
48Snapshot Tutorial
The Make-up Mode smoothes the skin texture of the subject and softens facial
shadows caused by harsh sunlight for better looking portraits.
1.In the REC mode, use [4] and [6] to display
± in the control panel, which enters the
Make-up Mode.
•If ± does not appear in the control panel, press
[4] or [6] many times until it appears. Each press
of [4] or [6] will cycle the control panel option in
the following sequence: Face Detection (page 46)
* Make-up Mode * Landscape Mode (page...")
48Snapshot Tutorial The Make-up Mode smoothes the skin texture of the subject and softens facial shadows caused by harsh sunlight for better looking portraits. 1.In the REC mode, use [4] and [6] to display ± in the control panel, which enters the Make-up Mode. •If ± does not appear in the control panel, press [4] or [6] many times until it appears. Each press of [4] or [6] will cycle the control panel option in the following sequence: Face Detection (page 46) * Make-up Mode * Landscape Mode (page...
Page 49
![Page 49
49Snapshot Tutorial
The Landscape Mode makes colors more vivid, filters haze, and performs other
processing that enhances the beauty of natural scenery.
1.In the REC mode, use [4] and [6] to display
Ö in the control panel, which enters the
Landscape Mode.
•If Ö does not appear in the control panel, press
[4] or [6] many times until it appears. Each press
of [4] or [6] will cycle the control panel option in
the following sequence: Face Detection (page 46)
* Make-up Mode (page 48) * Landscape...](http://img.usermanuals.tech/thumb/16/38223/w300_Casio_Exilim_EX-G1-48.png "Page 49
49Snapshot Tutorial
The Landscape Mode makes colors more vivid, filters haze, and performs other
processing that enhances the beauty of natural scenery.
1.In the REC mode, use [4] and [6] to display
Ö in the control panel, which enters the
Landscape Mode.
•If Ö does not appear in the control panel, press
[4] or [6] many times until it appears. Each press
of [4] or [6] will cycle the control panel option in
the following sequence: Face Detection (page 46)
* Make-up Mode (page 48) * Landscape...")
49Snapshot Tutorial The Landscape Mode makes colors more vivid, filters haze, and performs other processing that enhances the beauty of natural scenery. 1.In the REC mode, use [4] and [6] to display Ö in the control panel, which enters the Landscape Mode. •If Ö does not appear in the control panel, press [4] or [6] many times until it appears. Each press of [4] or [6] will cycle the control panel option in the following sequence: Face Detection (page 46) * Make-up Mode (page 48) * Landscape...
Page 50
![Page 50
50Snapshot Tutorial
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the bottom Control Panel option (Date/Time).
Use [4] and [6] to select the date or time.
NOTE
• You can select either of two display style (page 143) for the date: Month/Day or
Day/Month.
• The time is displayed using 24-hour format.
Your camera provides you with 3X optical zoom (that changes the lens focal
distance), which can be used in combination with digital zoom (that digitally
processes the center portion of the...](http://img.usermanuals.tech/thumb/16/38223/w300_Casio_Exilim_EX-G1-49.png "Page 50
50Snapshot Tutorial
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the bottom Control Panel option (Date/Time).
Use [4] and [6] to select the date or time.
NOTE
• You can select either of two display style (page 143) for the date: Month/Day or
Day/Month.
• The time is displayed using 24-hour format.
Your camera provides you with 3X optical zoom (that changes the lens focal
distance), which can be used in combination with digital zoom (that digitally
processes the center portion of the...")
50Snapshot Tutorial 1.In the REC mode, press [SET]. 2.Use [8] and [2] to select the bottom Control Panel option (Date/Time). Use [4] and [6] to select the date or time. NOTE • You can select either of two display style (page 143) for the date: Month/Day or Day/Month. • The time is displayed using 24-hour format. Your camera provides you with 3X optical zoom (that changes the lens focal distance), which can be used in combination with digital zoom (that digitally processes the center portion of the...