Casio Exilim EX G1 User Manual

111Dynamic Photo
8.Press the shutter button to shoot the background only.
The camera compares the images you shot in steps 6 and 8 and extracts the 
subject. The extracted subject image will appear on the monitor screen. If you 
selected “Moving Subject”, the subject image will be moving on the display.
• You can interrupt an ongoing subject extraction process (steps 6 through 8) at 
any time by pressing [MENU] or [BS].
IMPORTANT!
• When shooting the subject image, shoot against a white wall or some...

112Dynamic Photo
2.Use [4] and [6] to select the subject image you want to insert and then 
press [SET].
3.Use the zoom button to adjust the size of the subject and use [8], [2], 
[4], and [6] to adjust its position.
4.When everything is the way you want, press [SET].
This inserts the subject into the background image and creates a Dynamic Photo.
• If the original still image into which a moving subject is inserted is smaller than 
2M size, the Dynamic Photo will be the same size as the original.
• If...

113Dynamic Photo
A Dynamic Photo (a background image plus subject) is stored as a series of 20 still 
images. You can use the following procedure to convert the 20 images that make up 
a Dynamic Photo to a movie.
Procedure
PLAY mode * Dynamic Photo Screen * [MENU] * PLAY Tab * 
Movie Converter
• The final movie format is Motion JPEG.
• The final movie image size is 640x480 pixels.
IMPORTANT!
• This operation can be used only to convert Dynamic Photos to movies.
• Following conversion, the movie will be...

114Printing
Printing
• You can specify which images you want to print, the number of copies, and date 
stamp settings before printing (page 117).
You can connect the camera directly to a printer that supports PictBridge and print 
images without going through a computer.
.To set up the camera before connecting to a printer
1.Turn on the camera and press [MENU].
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].
Printing Snapshots...

115Printing
.Connecting the Camera to a Printer
1.Turn off the camera. Next, rotate the cover lock dial in the [4
OPEN] 
direction and open the memory card/terminal cover.
2.Use the USB cable that 
comes bundled with the 
camera to connect the 
camera to your printer’s 
USB port.
• The camera does not 
draw power over the USB 
cable. Make sure the 
camera’s battery is 
sufficiently charged before 
connecting.
• Make sure that you insert 
the cable connector into 
the USB/AV port until you 
feel it click...

116Printing
.To print
1.Turn on the printer and load paper.
2.Turn on the camera.
This will display the print menu screen.
3.Use [8] and [2] to select “Paper Size”, and 
then press [6].
4.Use [8] and [2] to select a paper size and then 
press [SET].
• The following are the available paper sizes.
3.5x5, 5x7, 4x6, A4, 8.5x11, By Printer
• Selecting “By Printer” prints using a paper size selected on the printer.
• See the documentation that comes with your printer for information about 
paper settings....

117Printing
.Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy, 
and time stamp on/off information on the memory card with the images. 
After configuring settings, you can use the memory card to print on a home 
printer that supports DPOF or take the memory card to a professional print 
service.
• Whether or not you will be able to use DPOF settings for printing depends on the 
printer you are using.
• Some professional print services may not...

118Printing
.Configuring the Same DPOF Settings for All the Images
Procedure
PLAY mode * Snapshot Screen * [MENU] * PLAY Tab * 
DPOF Printing * All images
1.Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [BS] so “On” is shown for 
date stamping.
2.Press [SET].
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you...

119Printing
.Date Stamping
You can use one of the following three methods to include the recording date in the 
printout of an image.
.Standards Supported by the Camera
• PictBridge
This is a standard of the Camera and Imaging Products Association 
(CIPA).
• PRINT Image Matching III
Using image editing software and printing on a printer that supports 
PRINT Image Matching III makes it possible to use information about 
shooting conditions that is recorded with the image, and produce 
exactly the type of...

120Using the Camera with a Computer
Using the Camera with a Computer
You can perform the operations described below while the camera is connected to a 
computer.
*Windows only
The procedures you need to perform when using the camera with your computer and 
when using the bundled software are different for Windows and the Macintosh.
Things you can do using a computer...
Save images to a 
computer and view 
them thereSave images and view them manually 
(USB connection) (pages 122, 131).
Transfer images...