Casio Exilim EX G1 User Manual

101Other Playback Functions (PLAY)
Procedure
PLAY mode * Snapshot Screen * [MENU] * PLAY Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas 
in existing images.
NOTE
• Correcting the lighting when shooting produces better results (page 85).
• Altering the lighting of an image causes the original image and the new (altered) 
version to be stored as separate files.
• When you display an altered image on the camera’s monitor screen, the date and 
time...

102Other Playback Functions (PLAY)
Procedure
PLAY mode * Snapshot Screen * [MENU] * PLAY Tab * 
White Balance
You can use the white balance setting to select a light source type for a recorded 
image, which will affect the colors of the image.
NOTE
• You also can adjust the white balance when recording images (page 83).
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and 
time indicates when the image was...

103Other Playback Functions (PLAY)
Procedure
PLAY mode * Snapshot Screen * [MENU] * PLAY Tab * 
Brightness
You can select one of five brightness levels, from +2 (brightest) to –2 (least bright).
NOTE
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and 
time indicates when the image was originally recorded, not when the image was 
altered.
Procedure
PLAY mode * Snapshot Screen * [MENU] * PLAY Tab * 
DPOF Printing...

104Other Playback Functions (PLAY)
Procedure
PLAY mode * [MENU] * PLAY Tab * Protect
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format 
operation (page 147).
Protecting a File Against Deletion (Protect)
OnProtects specific files.
1Use [4] and [6] to scroll through the files 
until the one you want to protect is 
displayed.
2Use [8] and [2] to select “On” and then 
press [SET].
An image that is protected is indicated by 
the › icon.
3To protect other files,...

105Other Playback Functions (PLAY)
Procedure
PLAY mode * Snapshot Screen * [MENU] * PLAY Tab * Date/Time
When the date and time settings are what you want, press [SET] to apply them.
NOTE
• The date and time stamped into an image using the Time Stamp (page 142) cannot 
be edited.
• You cannot edit the date and time of an image that is protected.
• You can input any date from 1980 to 2049.
Procedure
PLAY mode * Snapshot or Movie Screen * [MENU] * PLAY Tab * 
Rotation
1.Use [8] and [2] to select “Rotation”...

106Other Playback Functions (PLAY)
Procedure
PLAY mode * Snapshot Screen * [MENU] * PLAY Tab * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot. 
The original snapshot is also retained. You can select resize an image to one of three 
image sizes: 8M, 5M, VGA.
• Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of 
4:3, with both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the 
recording...

107Other Playback Functions (PLAY)
Procedure
PLAY mode * Snapshot Screen * [MENU] * PLAY Tab * Dubbing
2.Press [SET] again to stop audio recording.
• Take care that you do not block the camera’s microphone 
with your fingers while recording.
• Good recording results are not possible when the camera is 
too far away from what you are trying to record.
• Your camera supports the following audio data formats.
– Audio Format: WAVE/IMA-ADPCM (WAV extension)
• Adding audio (dubbing) is not possible for the...

108Other Playback Functions (PLAY)
Voice Recording Playback Controls
• Audio of an Audio Snapshot also can be played back on a computer with Windows 
Media Player or QuickTime.
Procedure
PLAY mode * Snapshot Screen * [MENU] * PLAY Tab * Copy
Files can be copied from the camera’s built-in memory to a memory card or from a 
memory card to built-in memory.
NOTE
• You can copy snapshots, movies, audio snapshots, or Voice Recording files you 
recorded with this camera.
• When a copied image appears on the...

109Dynamic Photo
Dynamic Photo
You can use the procedures in this section to crop either a moving subject or a still 
subject out of a snapshot and then insert it into another snapshot.
1.Press [BS] and then select the “Dynamic Photo” scene.
2.Press [SET], use [8] and [2] to select “Subject Type”, and then press 
[SET].
3.Use [8] and [2] to specify the subject type, and then press [SET].
• To create a still subject, select “Still Subject”.
4.Press [SET], use [8] and [2] to select “Number of Shots”, and...

110Dynamic Photo
5.Use [8] and [2] to select either “1” or “2” and then press [SET].
6.First, shoot an image that includes the subject 
you want to extract.
• Shoot an image in which the subject is as large as 
possible. If you selected “2” for the “Number of Shots” 
setting, the images should include some easily 
identifiable reference point that you can use for later 
alignment in step 7 below.
• If you selected “Moving Subject” the camera will record multiple subject 
images. Do not move the camera...