Casio Ex Fh25 Users Guide

101Advanced Settings
Procedure
[r ] (REC)  * [MENU]  * REC Tab  * Memory
This setting lets you specify which came ra settings should be remembered by the 
camera when it is turned off, and restored the next time the camera is turned on. To 
have the camera remember a setting, y ou should enable the setting’s memory. Any 
setting whose memory is disabled will be re set to its initial default any time the 
camera is turned off.
*Optical zoom setting only
Procedure
[ r ] (REC)  * [MENU]  * Quality Tab  * T...

102Advanced Settings
Procedure
[r ] (REC)  * [MENU]  * Quality Tab  * MeteringThe metering mode determines what part of the subject is metered for exposure.
Procedure
[r ] (REC)  * [MENU]  * Quality Tab  * Lighting
You can use this setting to optimize the  balance between bright areas and dark areas 
when shooting images.
Specifying the Metering Mode (Metering)
 Multi Multi-pattern metering divides the image into sections and measures 
the light in each section for a 
balanced exposure reading. This...

103Advanced Settings
Procedure
[r ] (REC)  * [MENU]  * Quality Tab  * Flash Intensity
You can specify flash intensity to one of 13 leve ls from +2 (brightest flash) to –2 (least 
bright flash). • Flash intensity may not change when the subject is too far away or too close.
Procedure
[ r ] (REC)  * [MENU]  * Quality Tab  * Color Filter
Settings: Off, B/W, Sepia, Red,  Green, Blue, Yellow, Pink, and Purple
Procedure
[r ] (REC)  * [MENU]  * Quality Tab  * Sharpness
You can specify one of five sharpness...

104Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 29 for the procedure for viewing snapshots.
1.Press [p] (PLAY) and then use [ 4] and [ 6] to display the movie you 
want to view.
2.Press [SET] to start playback.
Movie Playback Controls
• Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots
Viewing a Movie
Fast forward/fast 
reverse [
4 ] [6 ] (Playback in progress)
• Each press of either button increases the speed of the 
fast forward or fast...

105Viewing Snapshots and Movies
Each time you perform a continuous shutter (CS) operation, the camera creates a CS 
group that includes all of the images for that particular CS session. You can use the 
following procedure to play back t he images in a particular CS group.
1.Press [p] (PLAY) and then use [4] and [6] to display the CS group 
whose images you want to view.
2.About one second after you select a  CS group, high speed playback of 
its images will start automatically.
• After playback of a CS...

106Viewing Snapshots and Movies
The following are operations that are supported after you press [SET] to 
start image playback.
NOTE
• Multiple images shot using normal speed c ontinuous shutter are stored individually 
and are not grouped. This means they can  be displayed individually (page 29) but 
not as a CS group.
You can use the following procedures to del ete images while playback is in progress 
or paused.
. Deleting a Specific CS Group File
1.While CS image playback is in progre ss or paused...

107Viewing Snapshots and Movies
.Deleting All Files in a CS Group
1.While CS image playback is in progre ss or paused (toggle by pressing 
[SET]), press [
2].
This will display the “CS Frame Edit” menu.
2.Use [8] and [2] to select “Delete” and then press [SET].
3.Use [8] and [2] to select “Del Group Imag es” and then press [SET].
4.Use [8] and [2] to select “Yes”, and then press [SET].
NOTE
• Either of the following methods is recommended when you want to keep only one 
of the images in a CS group and...

108Viewing Snapshots and Movies
.Dividing Up All CS Groups
IMPORTANT!
• Once a CS group is divided, it cannot be regrouped.
1.While a CS group is displayed or  while the images of a CS group are 
scrolling on the monitor screen, press [MENU].
2.Use [4] and [6] to select the “PLAY” tab.
3.Use [8] and [2] to select “Divide Gr oup” and then press [6].
4.Use [8] and [2] to select “Divide All Gr oups” and then press [SET].
5.Use [8] and [2] to select “Yes”, and then press [SET].
Use the following procedure...

109Viewing Snapshots and Movies
1.In the PLAY mode, use [4] and [ 6] to scroll through the images until 
the one you want is displayed.
2.Slide the zoom co ntroller towards z ([ ) to 
zoom.
You can use [ 8], [ 2], [ 4], and [ 6] to scroll the 
zoomed image on the monitor screen. Slide the zoom 
controller towards  w to unzoom the image.
– When monitor screen contents are turned on, a 
graphic in the lower right corner of the screen 
shows what part of the zoomed image is currently 
displayed.
– To exit...

110Viewing Snapshots and Movies
1.Use the AV cable that comes with the camera to connect it to the TV.
• Make sure that you insert the cable connector into the USB/AV port until you 
feel it click securely into place. Failure  to insert the connector fully can result in 
poor communication or malfunction.
• Note that even while the connector is  fully inserted, you still will 
be able to see the metal part of the connector as shown in the 
illustration.
• Make sure that the camera is turned off before...