Casio Ex Fh25 Users Guide

151Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab  * Timestamp
You can configure the camera to stamp the recording date only, or date and time in 
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or 
deleted.
Example: July 10, 2012, 1:25 p.m.
• Even if you do not stamp the date and/or ti me with Timestamp, you can do so later 
using the DPOF function or some printing application (page 130).
• Stamping is performed in...

152Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab  * Date Style
You can select from among three different styles for the date.
Example: July 10, 2012
• This setting also affects the control panel date format as shown below (page 35). YY/MM/DD or MM/DD/YY: MM/DD
DD/MM/YY: DD/MM
Procedure
[MENU]  * Set Up Tab  * Language
.Specify the display language you want.
1Select the tab on the right.
2Select “Language”.
3Select the language you want.
Specifying the Date Style (Date Style)
YY/MM/DD 12/7/10...

153Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab  * Sleep
This feature turns off the monitor screen whenever no camera operation is performed 
for a preset amount of time. Press any button to turn the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 mi n, Off (Sleep is disabled while “Off” is 
selected.) • Sleep is disabled under any  of the following conditions.
– In the PLAY mode
– While the camera is connected to a computer or other device
– During a slideshow
– During movie...

154Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab  * REC/PLAY
• With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC 
mode or [p] (PLAY) in the PLAY mode.
• Change this setting to “Power On” or “Pow er On/Off” before connecting to a TV for 
image viewing.
Procedure
[MENU]  * Set Up Tab  * LCD Priority
You can use this setting to control when the monitor screen turns on.
Configuring [ r] and [ p] Settings (REC/PLAY)
Power On Camera turns on whenever [r] (REC) or [p] (PLAY)...

155Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab  * USB
You can use the procedure below to select the USB communication protocol, which is 
used when exchanging data with a computer, printer, or other external device.
Procedure
[MENU]  * Set Up Tab  * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video 
output system. You can also specify an aspect ratio of 4:3 or 16:9.
• Output to a TV is not supported while the camera is in the REC mode.
• When the...

156Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab  * Battery Type
See page 19 for details.
Procedure
[MENU]  * Set Up Tab  * Startup
Display the image you want to use as your startup image and then select “On”.
• The startup image does not appear when you turn on the camera by pressing [ p] 
(PLAY).
• You can specify a snapshot you recorded as  the startup image, or you can use the 
special startup image provided in the camera’s built-in memory.
• Formatting built-in memory (page 157) will delete...

157Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab  * Format
If a memory card is loaded in the camera, this operation will format the memory card. 
It will format built-in memory if no memory card is loaded.
• The format operation will delete all conten ts on the memory card or in built-in 
memory. It cannot be undone. Make sure you do not need any data currently on 
the card or in built-in memory before you format it.
• Formatting built-in memory wi ll delete the following data.
– Protected...

158Configuring Monitor Screen Settings
Configuring Monitor Screen Settings
[
Each press of [DISP] will cycle through display settings that display or hide on-screen 
information and the control panel. You can  configure separate settings for the REC 
mode and PLAY mode.
• The control panel is not displayed and  display information settings cannot be 
changed during movie recording.
Displays a histogram on the monitor screen which you can use to 
check the exposure of an image befo re you shoot it. You...

159Configuring Monitor Screen Settings
NOTE
• A centered histogram does not necessarily guarantee optimum exposure. The 
recorded image may be over-exposed or under-exposed, even though its 
histogram is centered.
• Due to the limitations of exposure co mpensation, you may not be able to achieve 
an optimum histogram configuration.
• Use of the flash and certain shooting  conditions can cause the histogram to 
indicate exposure that is different from th e actual exposure of the image when it is 
shot.
•...

160Appendix
Appendix
.Avoid Use While In Motion
• Never use the camera to record or pl ay back images while operating an automobile 
or other vehicle, or while walking. Lookin g at the monitor while in motion creates 
the risk of serious accident.
. Directly Viewing the Sun or Bright Light
• Never look at the sun or any other br ight light through the cameras viewfinder. 
Doing so can damage your eyesight.
. Flash
• Never use the flash unit in areas wh ere flammable or explosive gas may be 
present....