Casio EX F1 User Manual

111Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * 
Brightness
You can select one of five brightness levels , from +2 (brightest) to –2 (least bright).
NOTE
• Altering the brightness of an image causes the original image and the altered 
version to be stored as separate files.
• When you display an altered image on the camera’s monitor screen, the date and  time indicates when the image was originally recorded, not when the image was 
altered.
• The...

112Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * [MENU]  * PLAY Tab  * Protect
• Note that even if a file is protected, it will be deleted if you perform the format 
operation (page 145).
• Performing the above procedure while a CS gr oup folder is displayed will protect all 
the images in the CS group folder. You  can protect individual images in a CS group 
by performing the above procedur e while the image is displayed.
Protecting a File Against Deletion (Protect)
OnProtects specific...

113Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * Rotation
1.Use [ 8] and [ 2] to select “Rotation”  and then press [SET].
Each press of [SET] will rotate  the displayed image 90 degrees left.
2.When the displayed image is at  the orientation you want, press 
[MENU].
NOTE
• Rotation of movie images is not supported.
• Note that this procedure does not actual ly change the image data. It simply alters 
how the image is displayed on  the camera’s monitor...

114Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * Snapshot Screen  * [MENU]  * PLAY Tab  * Trimming
You can crop a snapshot to trim parts you do not need, 
and save the result in a separate file. The original 
snapshot is also retained.
Use the zoom controller to zoom the image to the size 
you want, use [ 8], [ 2], [ 4], and [ 6] to display the 
portion of the image you want to cut out, and then press 
[SET]. • The image produced by cropping a 3:2 or 16:9 image  will have an aspect ratio of...

115Other Playback Functions (PLAY)
Procedure
[p ] (PLAY)  * [MENU]  * PLAY Tab  * Divide Group
See page 99 for details.
Procedure
[p ] (PLAY)  * [MENU]  * PLAY Tab  * Display Layout
Use this procedure to select how display images are shown on the monitor screen.
Procedure
[p ] (PLAY)  * [MENU]  * PLAY Tab  * Select Frame
See page 100 for details.
Dividing Up a Continuous Shutter Group (Divide Group)
Selecting the PLAY Mode Screen Layout (Display Layout)
PLAY Mode
Normal 100% of the display image is...

116Printing
Printing
• You can specify which images you want to print, the number of copies, and date 
stamp settings before printing (page 119).
Printing Snapshots
Professional Print Service
You can take a memory card that contains the images you 
want to print to a professional print service and have them 
printed.
Printing on a Home Printer
Printing Images on a Printer with Memory Card Slot
You can use a printer equipped with a memory card slot to print 
images directly from a memory ca rd. For...

117Printing
You can connect the camera directly to a printer that supports PictBridge and print 
images without going through a computer.
. To set up the camera before connecting to a printer
1.Turn on the camera and press [MENU].
2.On the “Set Up” tab, select “USB” and then press [ 6].
3.Use [ 8] and [ 2] to select “PTP (PictBridg e)”, and then press [SET].
.Connecting the Came ra to a Printer
Use the USB cable that comes bundled with the camera to connect the camera to 
your printer’s USB port.
• The...

118Printing
.To print
1.Turn on the printer and load paper.
2.Turn on the camera.
This will display the print menu screen.
3.Use [ 8] and [ 2] to select “Paper Size”, and then press [ 6].
4.Use [ 8] and [ 2] to select a paper si ze and then press [SET].
• The following are the  available paper sizes.
3.5x5, 5x7, 4x6, A4, 8.5x11, By Printer
• Selecting “By Printer” prints usi ng a paper size selected on the printer.
• See the documentation that comes with your printer for information about  paper...

119Printing
.Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy, 
and time stamp on/off information on the memory card with the images. 
After configuring settings,  you can use the memory card to print on a home 
printer that supports DPOF or take the memory card to a professional print 
service. • Whether or not you will be able to use  DPOF settings for printing depends on the 
printer you are using.
• Some professional print serv ices may not...

120Printing
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute  will be performed using the last DPOF 
settings you configured for the images. To cl ear DPOF settings, specify “00” for the 
number of copies of all images.
Tell your print service ab out your DPOF settings!
If you take a memory card to a professional pr int service, be sure to tell them that it 
includes DPOF settings for the images to  be printed and the number of copies. If...